MGA Entertainment little tikes Pillow Racers BEE User manual

Pillow Racers™
Pillow Racers™
SKUs: 657375 / 657351 / 657368 ADULT ASSEMBLY AND SUPERVISION REQUIRED
AGES 18 - 36 MONTHS
Please keep this manual as it contains important information.
© The Little Tikes Company, an MGA Entertainment company.
LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other
countries. All logos, names, characters, likenesses, images, slogans,
and packaging appearance are the property of Little Tikes.
Printed in China • 0820-0-E/INT www.littletikes.com
www.littletikes.co.uk
www.littletikes.com.au
MGA Entertainment (Netherlands) B.V.
Baronie 68-70, 2404 XG
Alphen a/d Rijn, The Netherlands
Tel: [phone]
E-mail: klantenser[email protected]om
Little Tikes Consumer Service
2180 Barlow Road
Hudson, Ohio 44236 U.S.A.
1-800-321-0183
MGA Entertainment UK Ltd.
50 Presley Way, Crownhill, Milton
Keynes, MK8 0ES, Bucks, UK
[e-mail]
Tel: [phone]
Imported by MGA Entertainment
Australia Pty Ltd
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1300 059 676
LIMITED WARRANTY
The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is
free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is
required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available under
this warranty will be the replacement of the defective part or replacement of the product. This warranty is valid
only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse,
accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from
defects in material and workmanship. *The warranty period is three (3) months for daycare or commercial
purchasers.
U.S.A and Canada: For warranty service or replacement part information, please visit our website at
www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes Company, 2180 Barlow
Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase after warranty
expires—contact us for details.
Outside U.S.A and Canada: Contact place of purchase for warranty service. This warranty gives you specic legal
rights, and you may also have other rights, which vary from country/state to country/state. Some countries/states
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
CONTENTS
Illustrations are for reference only. Styles may vary from actual contents.
Please remove all packaging including tags, ties & tacking stitches before giving this product to a child.
A. Pillow on Base
B. Steering Handle with Handle Nut
C. 4 Wheels
BEE UNICORN DINO
(657375) (657351) (657368)
A.
B.
C. x4
A.
B.
C. x4
A.
B.
C. x4
ADULT ASSEMBLY REQUIRED.
WARNING
• Keep these instructions for future reference.
• Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain sharp edges
and sharp points. Keep away from children until assembled.
• Adult supervision required. Do not leave children unattended.
• Ride-on toys should not be used near swimming pools, on or near steps, hills, roadways, or inclines.
• Ride-on toy should be used with caution since skill is required to avoid falls or collisions causing injury to the child or
third parties.
• Shoes must be worn at all times.
• Only one rider at a time.
• Maximum weight: 50 lbs. (23 kg) per child.
• Not to be used by children over 36 months due to size limitations.
EACH SOLD SEPARATELY
1
4
CARE INSTRUCTIONS
•Hand wash the pillow body only.

2 3
ASSEMBLY
First, open the hook and loop fasteners under the
base and remove pillow body from both front and
rear wheel extensions and anti-tip bar on base.
Unscrew steering handle’s nut from handle
and remove.
Thread steering handle (B) through opening
located on the top of the pillow as shown. For
correct placement, make sure the logo on the
handle is facing the front.
Be sure steering handle is completely
through opening.
Pull pillow body over front anti-tip bar. Insert steering handle through hole in
base of the body as shown.
Secure using steering handle’s nut (B) as shown. Pull pillow body back over both front and rear
wheel extensions.
1. Pull cloth together at the LEGS and close the
hook and loop fastener.
2. Pull the cloth together at the CENTER and
close the hook and loop fasteners.
12
34
B
56
B
78
11
11
2
9
Push wheel (C) x4 into base until it snaps in place.
10
C X4