Micanan PRO-LT User manual

MICANAN SYSTEMS INC.
INSTALLATION AND INSTRUCTION MANUAL
MODEL: PRO-LT
2 \'EARWARRANTY
wiring Diagram:
Feh 2009

2
TABLE OF CONTENTS
VERIFICATION Of OPf,RATOR AND HAR}WAITII
SPFJCITICATIONS
_12
13
PAGE:
3
4
5
6
t0
ll
13
t4
SAFETY INSTRUCTIONS
TNSTAT,I,ATION
I,TMIT SWITCII ADJI]STMENT
CONNI;CTION oF PowxR SIJPPI,YAND CONTROI, STATION
BRAKE ADJT]STMENI'
CONNf,CTION OFREVERSING EDGtr DEYICE AND CON-TROL ACCESSORItrS
CT,I]TCI{ AD.IT]STMENT
EMERGENCY MANUAI OPERATION
OPERATOR MAINTENANCE
MECHANICAL DRAW]NGS AND PARTS LISTS
15
16
18
19
ELtrCTRICA]- DLA.GRAII{S
WARRANTY

Upon delivery ofyour MICANAN SYSTEMS limited duty tolley door operator, please insp€ct the unil
caretully for danage. Ve'ify that operator horsepower, voltage, phase and amperage corespond to
available power supply and door application. Check that along with your operator you have 'eo€ivod the
FOR ANY QUESTIONS CONCERNINC THE SAFETY OR
OPERATION OF TTIIS OPERATOR PLEASE CONTACT
MCANAN SYSTEMS AT 1 877-888-1116
following standard hardware.
I x OPEN/CLOSE/STOP 3 button contlol station:
1x Set of trolley tracks (door height + 2'6")
I x Drive chain package (door height x 2 + 5' 6" (1.65n) c/w comectiDg lint)
1 x Trolley ca.riage and 3/8 take-up bolt assembly
I x Trollev track md bracket
1 x Frod idler
2 x Trolley spreader bds
I x Trolley arn assembly
I x Set of waming Signs

PRO-LT medium duty trolley operator is designed for standard lift ovefiead sectional garage doors with
STANDARD OPERATOR WEIGET: 40-45 Lbs.
MOTOR: Idermitlent duty 1000 RPM notor witl high stading torque.
- Themaly proteoted by a built-in lhemostat that cuts power to the motor ard control citcujt
when overheating.
- Horsepow€r: 1/2H? - Voltage: I t5V, 220V l-phase
DOBR HEIGHT PLUS
REDUCTIONi Prjmary: (4L) V-belt and puleys (l.5" ro 7" diameter)
Secondary: #41 chain and sprockets
OUTPUT SHAFT SPEtrD: 90 RPM DOOR SPEED: g"/second
SOLENOID BR4KE (OPTIONAI-): Solenoid Brake system available for model PRO LTB
WIRING TYPtr (STANDARD): C-2 Wiring conslant pressure on close, nonentary contact on open and
stop. Wircd to accept revesing edge, radio control, pho.ocels, loops and OPEN/CLOSE devtces
NOTE: Ifnonentdn contact m close
ierminal #5.
TRANSIORMER: 24VAC control cicuit, supplies power to drive contlol relays \tith l5VA pover
available for extemal devices.
LIMIT ADJUSTMENT: 4 micm switches that cootrol door 1travel. These limit switches are activated by
tully adjustable screw Dpe cams.
EMERGENCY DISCONNECT: Quick release disconnecr door arm to allow person to disengage
operator drive chain *om door fo. manual ope.ation-
CLUTCH: Adjustable ftictiotr clutch to mininize damage to door operator, door or vehicles.
OPERATOR DIMENSIONS:
(I'lINIMUM)

Do rct alov chndren to play with door.
Before insiallaiion, be sule that operator is suited fff qpe ofdoor and application
Connect a rcversing device to preve entrapment if door is located near pedestrian trafEc.
Place control device vithin clear sisht ofthe door but at a minimum distance Fom the door so thal user
cmor reach mo\ing door pdrb $heo ope'aung.
Outdoor extemal devices should have security features to Fevent Mauthorized opemtion ofthe door.
Nevercross under a moving door.
Press the "OPEN" device or activate quick lelease disconnect device if a penon is tiapped unde! the
Do not use fisconnect mechanism or manually opemte door unless power ha,s been electrically
Ke€p doors properly maintaioed. Test door and senioe regularly. Have a qualified service persotr make
rcpai's. An Lnnaintained doot srsten could cause injury or deatlL
The owner or users must udefttand the safery ard operation of door system. Insure that this
installation nanual be located close to tbe door system.