Microh RIO TRI PAR User manual

Photo Optic
Technical Information
Technical Specifications
Weight & Dimensions
Length
Width
Height
Weight
Power
Auto-ranging
Power Consumption
Power Consumption
Inrush Current
Power Linking
Connectors
Light Source
Type
Configuration
Control & Programming
Ordering Information
Warranty Information
Cooling
Maximum ambient temperature
Date input
Date output
Date pin configuration
Protocols
DMX Channels
RIO TRI PAR
Warranty
9.6 in (245 mm)
9.6 in (245 mm)
8.0 in (205 mm)
9 lbs (4.5 kg)
100~240 V, 50/60 Hz
52 W (0.44 A) max @ 120 V
52 W (0.23 A) max @ 230 V
0.2 A @ 120 V, 0.4 A @ 230 V
12 units max @ 120 V, 24 units max@ 230V
NEUTRIK Power CON
R
14 units
1,600 lux
Natural convection
Locking 3-pin XLR male socket
Locking 3-pin XLR female socket
Pin 1 shield, pin 2 (-) pin 3 (+)
USITT DMX512-A
2-year limited warranty
14
3W,50,000 hrs,trI-color LEDs
104 F(40 C)
3,4,5,10
17
32
Thermal
Luminance@2m(withincluded 15 degreeIenses)
Beam Angle (with included 15 degree Ienses)
Field Angle (with included 15 degree Ienses)
RIO TRI PAR
RIO TRI PAR
MICROH

Table of Contents
Table of Contents
1. Before you Begin ............................................................................... 1
What is included .................................................................................................1
About thisGuide .................................................................................................1
Unpacking .........................................................................................................1
Text Conventions................................................................................................1
Icons.................................................................................................................1
Safety Notes...................................................................................................... 2
Expected LED Lifespan.......................................................................................2
2. Introduction....................................................................................... 3
Fixture at a Glance .............................................................................................3
Features ........................................................................................................... 3
Product Overview .............................................................................................. 4
3. Setup .................................................................................................5
AC Power ......................................................................................................... 5
Lens Assembly.......................................................E rrorl Bookmark not defined.
DMX Linking ..................................................................................................... 6
ID Addressing ................................................................................................... 6
Mounting ..........................................................................................................6
4. Operation .......................................................................................... 8
Control Panel Description .. ................................................................................ 8
Control Options..................................................................................................8
Basic Programs ......................................................E rrorl Bookmark not defined....
Menu Options
.................................................................................................... 9
DMX Values .....................................................................................................10
5.Technical Information
........................................................................... 13
General Maintenance .. .....................................................................................13
Repeairs..........................................................................................................13
Retums Procedure ...........................................................................................13
Claims.............................................................................................................13
Contact Us.......................................................................................................13
Technical Specifications ...................................................................................14
13
Technical Information
5. Technical Information
General
Maintenance
Repairs
Returns
Procedure
Claims
Download the RIO TRI PAR user manual and refer to its
chapter for a description on how to troubleshoot
and maintain this fixture
Technical Information
Always dry the external optics and glass surfaces carefully after
cleaning them.
Never spin a fan using compressed air.
Download the RIO TRI PAR user manual and refer to its
chapter for a description on how to troubleshoot
this fixture
Technical Information
If you need help troubleshooting your fixture,contact
Technical Support.
Download theRIO TRI PAR user manual and refer to its
Technical Information chapte r for a de script ion o n how to return this
fixture to RIO TRI PAR.
Download theRIO TRI PAR user manual and refer to its
Technical In fo rm at io n chapter for a description on how to make a claim
other claims (missing parts, fixture not working , etc., contact
RIO TRI PAR Technical Support.

Operation
DMX Values (Cont.)
Channel Value Percent/Setting
000 255
Function
1
2
3
000 255
000 255
000 255
000 255
000 255
000 255
1
2
3
4
1
2
3
4
6
1
2
3
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
Arc.1
Ar1.d
Ar1.s
HSV
0~00%
0~100%
0~100%
0~100%
0~100%
0~100%
0~100%
0~100%
0~100%
0~100%
0~100%
0~100%
0~100%
0~100%
0~100%
Red
Green
Blue
Function
Master Dimmer
Red
Green
Blue
Function
Master Dimmer
Red
Green
Blue
Strobe
Function
Hue
Saturation
Value
Channel Value Percent/Setting
Channel Value Percent/Setting
Channel Value Percent/Setting
In HSV mode, Hue refersto the visible light, such as red, yellow, and
cyan, etc.
Saturation is the dominanceof hus in the color; when
saturationis at 100%, thecolor is at its purest,
Value is the color,s
brightness;whenvalueis at100%, thecolor is at its brightest.
12 1
Before you Begin
1. Before you Begin
What is
included
About this
Guide
Unpacking
Tex t
Conventions
Icons
RIO TRI PAR
One power input cord with Edison plug
One safety cable
One safety cable
Warranty Card
Quick Start Guide
This RIO TRI PAR Start Guide is a condensed version
of the RIO TRI PARuser manual, which users can download
from the RIO TRI PAR Web site
Immediately upon receiving a fixture, carefully unpack the carton. Check
theContents to ensure that all parts are present,and have been received in
good Condition.If you have detected a problem,refer to the Claims section
in the
Technical information chapter of the RIO TRI PAR use manual for
Complete
Instructions
on
how
to make aclaim.
Convention MeaninIg
Icons Meaning
A range of values
A set of mutually exclusive values in the text
A fixture function, a new term, or a section or
chapter
A key to be pressed on the fixture,s control panel
A menu option
A sequence of menu options to be followed
A range of menu values
A set of mutually exclusive menu options
A value to be entered or selected
This icon indicates crtical installation,configuration or
operation information. Failure to comply with this
information may render the fixture partially or completely
inoperative,damage thidr-party equipment, or cause harm to
the user.
This icon indicates important installation or configuration
information.Failure to comply with this information may
prevent the fixture from functioning correctly.
This icon indicates useful,although non-critical information.
DMX512-A transmission protocol.
1~512
50/60
Claims
<SET>
Settings
MENU> Settings
[1~10]
Yes/ N o
ON
The term DMX used throughout this document refers to the USITT

Before you Begin
211
Operation
Safety
Notes
Expected
LED
Lifespan
Personal
Safety
Mounting
and Rigging
Power and
Wiring
Operation
Please read the following notes carefully because they include important
safety information about the installation, usage and maintenance of this
product.
The RIO TRI PAR has no user serviceable parts inside it.
Any reference to servicing this fixture you may find within this guide
or the downloaded user manual will only apply to properly
RIO TRI PAR certified technicians. Do not open the housing or
attempt any repairs unless you are one of them.
Please refer to all applicable local codes and regulations for proper
installationof the RIO TRI PAR..
Avoid direct eye exposure to the light source while the fixture is on.
Always disconnect the RIO TRI PAR T
our from its power
source before servicing.
The RIO TRI PAR ,s housing may be hot when operating.
This product is for indoor use only!To prevent risk of fire or shock,
do not expose thisproduct to rain or moisture.
Make sure there are no flammable materials close to this product
while operating.
When hanging this fixture,always secure it to a fastening device using
a safety chain (included).
Make sure this product,s housing or cable are not cracked, crimped or
Never disconnect this product by pulling or tugging on the power
cable.
LEDs gradually decline in brightnessover time, mostly because of heat.
Packaged in clusters, LEDs exhibit higher operating temperatures than in
ideal or singular optimum conditions. For this reason, using all color
LEDs at their fullast intensity significantly educes the LEDs,lifespan.r
Under normal conditions, this lifespan can be of 40,000 to 50.000 hours.
If extending this lifespan expectancy is vital, lower the operational
temperature by improving ventilation and reducing the extemal
In the unlikely event that your RIO TRI PAR may require
service, please contaet RIO TRI PAR Technieal Support.
TOUR (Cont)
Value Percent/Setting Function
Channel
7
(Cont)
8
9
10
131
141
151
161
171
181
191
201
211
221
140
150
160
170
180
190
200
210
220
255
000 255
000
010
030
070
130
190
009
029
069
129
189
255
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
009
019
029
039
049
059
069
079
089
099
109
119
129
139
149
159
169
179
189
199
209
210
211
Value Setting Value Setting Value Setting
0~100% (Only when using channel 8)
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Custom 8
Custom 9
Custom 10
No Function
Preset dimmer speed from display menu
Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3
Nonlinear dimming curve 4 (slowest)
AII ID s
ID1
ID2
ID3
ID4
ID5
ID6
ID7
ID8
ID9
ID10
ID11
ID12
ID13
ID14
ID15
ID16
ID17
ID18
ID19
ID20
ID21
ID22
ID 23
ID 24
ID 25
ID 26
ID 27
ID 28
ID 29
ID 30
ID 31
ID 32
ID 33
ID 34
ID 35
ID 36
ID 37
ID 38
ID 39
ID 40
ID 41
ID 42
ID 43
ID 44
ID 45
ID46
ID47
ID48
ID49
ID50
ID51
ID52
ID53
ID54
ID55
ID56
ID57
ID58
ID59
ID60
ID61
ID62
ID63
ID64
ID65
ID66
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
Programs (Cont.)
Auto Speed Adjust
Dimmer Speed
ID Addressing
Maximum ambient temperature(ta) is 104 F(40 C).Do not operate
the fixture at a higher temperature.
In case of a serious operting problem,stop using this probuct
immediately.

Operation
DMX Values
TOUR
Channel Value Percent/Setting
000 255
000 255
000 255
000 255
1
2
3
4
000 005
006 010
011 030
031
051
071
091
111
131
151
171
201
206
211
216
221
226
231
236
241
246
251
050
070
090
110
130
150
170
200
205
210
215
220
225
230
235
240
245
250
255
000
011
010
255
000
021
031
041
051
061
071
081
091
101
111
121
020
030
040
050
060
070
080
090
100
110
120
130
5
6
7
Function
Dimmer
Red
Green
Blue
0~100%
0~100% (Step Time if CUS 01~10 active)
0~100% (Fade Time if CUS 01~10 active)
0~100%
No Function
No Function
Red 100%/ Green Up/ Blue 0%
Red Down/Green 100%/Blue 0%
Red 0%/Green 100%/Blue Up
Red 0%/Green Down/ Blue 100%
Red Up/ Green 0%/Blue100%
Red 100%/ Green 0%/ Blue Down
Red 100%/Green Up/Blue Up
Red Down/Green Down/Blue 100%
RGB 100%
White 1: 3,200 K
White 2: 3,400 K
White 3: 4,200 K
White 4: 4,900 K
White 5: 5,600 K
White 6: 5,900 K
White 7: 6,500 K
White 8: 7,200 K
White 9: 8,000 K
White 10 :8,500 K
White 11: 10,000 K
No Function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Custom 1
No Function
0~20 Hz
Color Macro + White
Balance
Strobe
Programs
(Continues next page)
2. Introduction
Introduction
Fixture at
a Glance
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Master/Slave
Auto Programs
100~240 VAC, 50/60 Hz
Auto-ranging Power Supply
Replaceable Fuse
User Serviceable
Duty Cycle
Features
Additional
Features
345Or 10
-
Channel tri-color RGB LED wash light(with ID
addressing)
Operating modes (personalities)
3-channel:
3-channel:
4-channel:
4-channel:
5-channel:
6-channel:
11-channel:
RGB control
HSV control (hue, saturation and value)
RGBW control
RGB, dimmer
RGBW, dimmer
RGBW, dimmer, strobe
RGBW, ID, dimmer, strobe, macro, auto/custom,
dimmer speed, auto speed
RGB color mixing with or without DMX controller
Color temperature presets(3,200~10,000 K)
Recall custom programs via DMX
Recall custom programs via DMX
Five distinct dimming curves
3-pin DMX input and output connectors
Power linking:max 12 units @ 120 V
LED display with password protection
Gel frame holder (4 mm max thickness)
Double-bracket yoke that doubles as floor stand
NEUTRIK powerCON connector
R
3
3,4,5
10

Operation
Menu Options
Main Level 2nd Level 3rd Level 4th Level Instructions
STAT
AUTO
Run
DMX
PERS
ID
EDIT
SET
CAL1
CAL2
KEY
Red
Green
Blue
Strob
AT 1~10
PR 1~10
DMX Slave
D 001~512
TOUR
Arc.1
Ar1.d
Ar1.s
HSV
ID 1~66
PR 01~10
UPLD
REST
ID
COLOR
Dim
WT 1~11
RGBW
On/Off
/
000~255
N/A
N/A
N/A
N/A
SC 01~30
Password
Password
On/Off
Off
RGBW
UC
Off
Dim1
Dim2
Dim3
Dim4
N/A
N/A
Red
Green
Blue
Red
Green
Blue
N/A
N/A
N/A
N/A
N/A
N/A
N/A
000~255
000~255
N/A
Red
Green
White
Strobe
Time
Fade
Combine Red, Green, Blue andWhite to
generate a custom color (0~100%)
Select the strobing frequency (0~20 Hz)
Choose from 10 automatic programs
Choose from 10 customizable programs
(Use to customize them)
DMX: Works with a DMX controller
Slave: Works with a Master or a COLOR-CON
Set the DMX starting address
10-channelRGB+D+Macros+ID+Strobe
3-channel RGB
4-channel RGB + D
5-channel RGB + D + Strobe
3-channel:Hue, Saturation, and Vatue
Assign the ID address(1~66) to a fixture
Edit
0~255 Select the values (0~255) to generate a
new color
0~20 Select the strobing frequency (0~20 Hz)
0~255 Select the scene duration
0~255 Select the fading time
Upload the custom programs to another fixture.
Perform a factory reset
Enable or disable ID Addressing
Enable or disable color calibration functionality
Linear dimmer speed
Special dimmer speed
Dim1 is the fastest dimming curve
Dim4 is the slowest dimming curve
Edit the color temperature of the 11 pre-set h
wite
levels
Set the maximum level of each color (RGB) to
determine the resulting white balance when
DMX RGB = 255, 255, 255.
Enable or disable the password lockout function
9
4
Introduction
Product Overview
9.6 in
245 mm
9.6 in
245 mm
8.0in
205 mm