Mieo HT706 User manual

./ ;, ;)i:.r:.
,'7 nr :,:::!
1/ -a :-
,; "{*o ;
) \' ,//
i .;i, -. ;//./ .
: il .."-- t' .,
: \:1:. .4, /r/ :
" "':i3';'ii:/' t'
/ ,:,)::!.'tt; \
/ ;tY':;,?. /
. ,.11; j
.. ,,| \:;:
:,:':/
t: -.^. I
: ,ia t:
t&"r;'-,/
ru iEBr r
l;? ,
'
MiHO
Non-Contact
Infrared Thermometer
User manual
Model:HT706

Thank you for purchasing the Non-
contact lnfrared Thermometer. Please
read the following instructions to achieve
the most accurate temperatures and safe
operation. With proper care and use, your
thermometer will provide you reliable
readings for many years.
Your Non-contact I nfrared Thermometer
is intended for monitoring human body
temperature in the home and is
appropriate for all ages. This kind of the
Features
2 sec .Measurement
|r,A]l ,.r". atarm over 38c
% Ca"iu"-Fahrenheit
B Memory 10 Readings
[S-l eoov temperature
thermometer can also be used to measure fA-l n,titt surface temperature in baby's
the temperature of objects such as bath | ! I bot1"
water, a.bottle of milk or a variety of other
items. lts non-contact design mikes this l*l surtace temperature of Baby's bath
thermometer less threatening and more
sanitary than most other thermometers.
The thermometer can even be used while
a child is sleeping.

Overview
LCD display
SCAN Button
'MEM'Button
(Memorv)
Perbon/Obirict
Mode Button
LED Lisht
Power Button
lnfrared Lens
Battery Cover
(front) (back)
LCD
displar Meaning Oescription
"cfr Fahrenheil/Celsius
tFor6heed Scan Mod6
sP Object Scan Mode
B8 l\remory symbol and
neasuremenl numbet
lIo Scanning in progrdss
5Low battery Jnit will work;replace batteries soon
@Happy face rnotcates temperature is lower than
100.4'F(38t)
@Sad face nolcatas lemp€rature is 100.47
(38t) or hlgher
E4 r'lgasurement is b6low
rormal tomp6ralu16
ange.
{gtaKe temper6lur€ ensuring propor
)osltioning
EMeasuremenl is above
normal temperature
range.
tetaKe temperature ensuring prop6r
)osilioning
tri Operaling temperature
ls outside ofthe
permiSsiblo range
60.8T-95r;1 6C-35()) .
lake th€rmomterto a room where the
emperaluor i6 wllhin the permlssible
ange.Wait 45 minutes to stabilize
hermometar
tt BIank display lheck batt6ry potarity.lvlay n€ed to
'6place batteries.
rg Low battery warnlng s rmmedaat6ly
Replacing the Battery
When the battery symbol r: appears
on the screen, the batteries will need to
be replaced soon. When the letters
'Lo ' and the battery slmbol n
appears on the display, the batteries
need to be replaced before taking another
measurement. Rechargeable batteries
are okay to use in this thermometer.
1. Gently slide the battdry cover back.
2. Carefully remove the old batteries and
properly discard.
3. lnsert new batteries according to the
proper polarity.
4. Slide the battery cover back on.
NOTE:
Please properly dispose of the batteries
away from small children and heat.

Operating Guide
l.Press the :power' button to turn on
the thermometer.
2.PresS the 't /*o 'button to change
the testing mode of person and object.
Memory Button
Mode Button
l.Press the 'power' button to turn on
the thermometer.
2. Press and hold both the ' ll / 5o ' and
'MEM' buttons forapproximately 3
seconds. This will change the mode to
either 'F or 'C , Once the thermometer
beeps,the unit is ready for measurement.
1 . lf the thermometer is off, press the
'Power' button to turn the thermometer
on.
2. Press and hold the 'SCAN' button. The
screen should appear the follow picture.
3. Aim the front of the theimometer at the
person's forehead, l,lold the thermometer
approximately 3 to 5 cm away from the
forehead.
NOTE: Attempting to take a measurement
anywhere else on the body may result in
an inaccurate reading.
4. While continuing to press the
'SCAN' button, slowly move the
thermometer toward or away from
their forehead until the thermometer is
continuously beeping and the LED light
flashes.
5. The 'beeping' indicates that the
distance required for the measurement
is correct. Once the thermometer is
consistently and continuously beeping,
release the 'SCAN ' button.
ri
'lr
t/i
r-l
lnn
LUU]
Body
Object

6. The thermometer will beep once and
show the temperature reading for 2
seconds.
of the thermometer,s permissible
measurement range, 'Err' will
appear on the display.
7. The thermometer will automatically
beep and shut-off after approximately one
minute of non-use.
NOTE:
To ensure accuracy:
". Please wait at least 1 minute between
successive readings.
. Clean the probe lens before and after
each use.
4. The thermometer will beep once and
show the temperature reading for 2
seconds.
5. The thermometer will automatically
beep and shut-off after approximately
one minute of non-use.
1 . lf the thermometer is off , press the
'Power' button to turn the thermometer
on.
2. Press
of objecl 'l /.oo ' button to set the mode
3. Press and hold the 'SCAN' button and
then aim the front of the thermometer at the
object. Hold the thermometer approximately
3 to 5 cm away from the object and release
the'SCAN' button.
frl
l6E
o"c
NOTE: A happy face symbol @ will
appear on the display if the temperature is
below 100.4T (38C). lf the temperature
reading is above 100.4'F (38C), a sad
face symbol @ will appear.
lf the temperature is outside of the
thermometer' s sensory range, 'Lo' or
'Hi' will appear on th; display. lf
however, the temperature is outside
measurement.
dts
nn
uu
r"
i
ll
1 tir

1. Press the 'MEM' button to recall
up to 10 measures stored in memorY.
iffiF] Memory Button
i]ili/ltl una. Button
2. The I symbol or no symbol will
appear with each measurement stored in
memory to indicate whether a person or
object temperature was taken.
3.Thehappy face g orsadface@
symbol will appear 5 seconds after
viewing the measurement stored in
memory.
riry-
Cleaning & Storage
NOTE:
After 10 measurements have been
stored in the memory, the oldest reading
will be automatically deleted.
1. Press the Power button to turn the
thermometer on.
2. To clear the memory, simply hold the
'MEM' button down until the thermometer
beeps and two horizontal lines appear.
. Only use a soft dry cloth to ilean the
thermometer.
. Make sure that liquid does not enter the
interior of the thermometer.
'Never use abrasive cleaning agents,
thinners or gasoline for cleaning.
. Do not immerse into water or other
cleaning liquids.
. Remove the battery if the thermometer
will not be used for an extended period of
time.
. Store in a sun-free and dust-free dry
area at a temperature between
-25'C - 55C ( -13'F - 131T ) with relative
humidity not exceeding 95%.
. Protect the thermometer from severe
impact or shock. KeeP stored in the
protective storage bag.
fir
To ensure accurate measurements,
clean the lens before and after each use.
Fingerprints and dirt can cause inaccurate
readings.
. Use an alcohol swab or a soft cotton
swab moistened with alcohol to clean
the thermometer lens.
. Do not use paper towels, but the
fibers may scratch the lens.
. Do not use water to clean the lens or
thermometer.
E8t I
]Efi I
@rl Hfi ..$S
ee

' For accurate results,wait at least 30
minutes after exercising,bathing or
returning from the outdoors.
. Wait at Ieast 1 minute between
read i ngs.
. lf multiple readings are taken over a
short period of time,use the average of
those readings.
' Because everyone' s temPerature
varies slightly,keep a record of your body
temperature to serve as a reference
when judging a fever.
' Keep your forehead dry and clean as
the liquid(water or sweater)effects the
measure result.
. The measurement of forehead is
equivalent to the oral temperatuer.
Use of this lRthermometer is not intended
as a substitute for consultation with your
physician. 1 O
Specifications
Measuring Range
Human: 32.0C -42.2'C
89.6T - 107.9"F
Object: 5.0C -100C
41.0"F - 212"F
Accuracy
Human : +0.2Cl+0.4'F
Object: +1'C l+27
Memory 10 readings
Operation Distance 3-5 cm
Operatin Temperature 16.0C- 35.0C
60.8T- 95.07
Storage Temperature -25C - 55C
-13T - 1317
Power 2xAAA 1.5V alkaline batteries
Dimension
Weight 134 x85 x31 mm
769(without battery)
ts