MikroTik RouterBOARD User manual

Self-install Instructions
PureFiber-ADSL Failover (Upgrade from ADSL) - Self Install Guide
Skyway West - May 2019

Your current setup
Actiontec
WiFi Router
This is what your service
setup will look like
immediately after Telus
completes their PureFiber
Installation
Please follow this guide to
fully complete the
installation of your
connectivity solution.
IMPORTANT:
You will lose connectivity
during this process. Please
proceed ONLY when it is
okay to do so.
Call Skyway West Support if
you need assistance:
604-482-1212
Fiber ONT
(Provided by Telus)
Wall Jacks
DSL Modem

RouterBoard Management Router
(Sent to you by Skyway)
Panel
Skyway RouterBoard
Management Router
Represented in this guide
by this gray box
You will receive this
RouterBoard management
router from Skyway West.
Please connect it (according
to this guide) in order to
complete your setup.
You may also receive other
equipment from Skyway,
depending on the specifics
of your solution.

Don’t forget to plug in!
All devices described within
this guide must be plugged
in to appropriate power
outlets.
The diagrams herein do NOT
show power cords in order
to keep them simple and
easy to understand.

1. Plug your ADSL Modem to the wall jack, if required
Actiontec
WiFi Router
Fiber ONT
(Provided by Telus)
DSL Modem
Wall Jacks

Actiontec
WiFi Router
Fiber ONT
(Provided by Telus)
Wall Jacks
2. Unplug your Fiber ONT from your WiFi router
An Optical Network Terminal
(ONT) is the device that a
fiber line terminates into,
and converts optical data
into ethernet-protocol data.
DSL Modem

PureFiber Failover RouterBoard Port Diagram
Plug the Fiber ONT into port
ONE (Internet / PoE port) of
the Skyway RouterBoard.
Plug the ADSL or Cable
modem into port TWO of
the Skyway RouterBoard
Plug the Telus Actiontec WiFi
router into port FOUR of the
Skyway RouterBoard
Plug your network firewall
into port FIVE of the Skyway
RouterBoard
PureFiber ONT
ADSL (or Cable) Modem Actiontec WiFi Router
Your network firewall
Fiber ONT
(Provided by Telus) Skyway RouterBoard
Management Router
Actiontec
WiFi Router
Wall Jacks
DSL Modem

Protected
Company Network
Skyway RouterBoard
Management Router
Your Complete Solution
Fiber ONT
(Provided by Telus)
Public WiFi Network
Actiontec
WiFi Router
The Actiontec T3200 WiFi router is
configured for public WiFi. WiFi
internet traffic is separated from
LAN internet traffic; WiFi users
cannot reach your LAN directly
through our management router.
In order to reach your internal
network, WiFi traffic is tunneled to
Skyway and returns through your
Internet connection to your LAN
firewall.
If you prefer to not use the
Actiontec WiFi router, please inform
[e-mail] .
The public WIFi SSID and Password
are written on the Actiontec WiFi
router.
Wall Jacks
DSL Modem