Mikroweb PingBrother EPIW104 User manual

PingBrother
managed passive poe switch & IP w
USER MANUAL
PingBrother
®
EPIW104
managed passive poe switch & IP w
atchdog
USER MANUAL
EPIW104
atchdog

2
PingBrother EPIW104 user manual


2011 Mikroweb Internet ltd.
EPIW104
User Manual
ver
.1.
2
PingBrother is watchingyournetworkdevices
CONTENT
Content............................................................................................2
Chapter 1.........................................................................................3
1.1 Preface............................................................................3
1.2 CE mark warning.............................................................3
1.3 FCC warning...................................................................4
Chapter 2.........................................................................................5
2.1 Physical description ........................................................5
2.2Channel states and configuration.....................................6
2.3Power input assignment...................................................6
2.4 Ethernet ports..................................................................7
2.5 POE selector slide switches............................................7
2.6 Application example figures ............................................8
Chapter 3.........................................................................................9
3.1 WEB based management ...............................................9
3.1.1 Status screen ....................................................9
3.1.2 IP Event & Actions configuration.....................10
3.1.3 Manual operation.............................................12
3.1.4 Manual ping.....................................................13
3.1.5 Password configuration...................................13
3.1.6 Network configuration......................................14
3.1.7 Time settings...................................................15
3.1.8 Email configuration..........................................16
3.1.9 System log.......................................................17
3.1.10 Firmware update ...........................................18
3.2 Reset the device ...........................................................19
3.3 Co-use with a standard 802.3af POE PD-s...................19
Chapter 4.......................................................................................20
4.1 Technical specifications ................................................20

3
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
Capter 1
1.1 Preface
PingBrother is a passivePOE switch (PSE), that can work on nearly any low voltage
(8-
56V DC or 9
standard or non standard POE devices (PD).
The POE output power can be fully mana
network, or
by its own built
the events and responses email notification
It’s a great cost
devices such as IP cameras, Wifi radios, VOIP devices, switches especially those
which have a POE support. By manually deactivating the POE function, PingBrother
can contro
l any connected non POE device by its relay contact outlets.
1.2 CE M
ARK
This is a Class
interference in which case the user may be required to take adequate measures.
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
PingBrother is a passivePOE switch (PSE), that can work on nearly any low voltage
56V DC or 9
-
42V AC), and can distribute its input power to any kind of connected
standard or non standard POE devices (PD).
The POE output power can be fully mana
ged either manually, remotely over t
by its own built
-
in control system which works as an IP watchdog
the events and responses email notification
canmake.
It’s a great cost
-
effective multifunctional tool for unattended functioning network
devices such as IP cameras, Wifi radios, VOIP devices, switches especially those
which have a POE support. By manually deactivating the POE function, PingBrother
l any connected non POE device by its relay contact outlets.
ARK
WARNING
This is a Class
-
A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
PingBrother is watching
yournetworkdevices
PingBrother is a passivePOE switch (PSE), that can work on nearly any low voltage
42V AC), and can distribute its input power to any kind of connected
ged either manually, remotely over t
he
in control system which works as an IP watchdog
. About
effective multifunctional tool for unattended functioning network
devices such as IP cameras, Wifi radios, VOIP devices, switches especially those
which have a POE support. By manually deactivating the POE function, PingBrother
l any connected non POE device by its relay contact outlets.
A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

4
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
1.3
FCC WA
ThisEquipment has been tested and foundtocomplywiththelimitsfor a Class
Adigitaldevice, pursuantto Part 15 of the FCC rules.
Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencein
a residentialinstallation. Thisequipmentgene
canradiateradiofrequencyenergy and, ifnotinstalled and
usedinaccordancewiththeinstructions,
maycauseharmfulinterferencetoradiocommunications. However, thereis no
guaranteethatinterferencewillnotoccurin a particularinstallation.
Ifthisequipmen
whichcan be determinedbyturningtheequipmentoff and on, theuser is
encouragedtotrytocorrecttheinterferencebyoneor more of thefollowingmeasures:
•
Reorientorrelocatethereceiving antenna.
•
Increasethes
•
Connecttheequipmentinto an outleton a
circuitdifferentfromthattowhichthereceiver is connected.
•
Consultthedealeror an experiencedradio/TV technicianforhelp.
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
FCC WA
RNING
ThisEquipment has been tested and foundtocomplywiththelimitsfor a Class
Adigitaldevice, pursuantto Part 15 of the FCC rules.
Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencein
a residentialinstallation. Thisequipmentgene
ratesuses and
canradiateradiofrequencyenergy and, ifnotinstalled and
usedinaccordancewiththeinstructions,
maycauseharmfulinterferencetoradiocommunications. However, thereis no
guaranteethatinterferencewillnotoccurin a particularinstallation.
Ifthisequipmen
tdoescauseharmfulinterferencetoradioortelevision reception,
whichcan be determinedbyturningtheequipmentoff and on, theuser is
encouragedtotrytocorrecttheinterferencebyoneor more of thefollowingmeasures:
Reorientorrelocatethereceiving antenna.
Increasethes
eparationbetweentheequipment and receiver.
Connecttheequipmentinto an outleton a
circuitdifferentfromthattowhichthereceiver is connected.
Consultthedealeror an experiencedradio/TV technicianforhelp.
PingBrother is watching
yournetworkdevices
ThisEquipment has been tested and foundtocomplywiththelimitsfor a Class
-
Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencein
maycauseharmfulinterferencetoradiocommunications. However, thereis no
guaranteethatinterferencewillnotoccurin a particularinstallation.
tdoescauseharmfulinterferencetoradioortelevision reception,
whichcan be determinedbyturningtheequipmentoff and on, theuser is
encouragedtotrytocorrecttheinterferencebyoneor more of thefollowingmeasures:
eparationbetweentheequipment and receiver.
circuitdifferentfromthattowhichthereceiver is connected.
Consultthedealeror an experiencedradio/TV technicianforhelp.

5
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
Capter2
2.1 Physical
description
Figure 1
1.
Reset button
2.
Indicator LEDs
3.
Ethernet connectors
4.
Terminal block power connector
5.
Relay contact outlets
6. POE
power selector slide switch
7.
Mounting tabs for hanging installation
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
description
Reset button
Indicator LEDs
Ethernet connectors
Terminal block power connector
Relay contact outlets
power selector slide switch
Mounting tabs for hanging installation
PingBrother is watching
yournetworkdevices

6
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
2
.2 Channel states and configuration
Channel
description in the web
based GUI of the device
State of relays 1
POE power out on eth 1
LED indicators 1
“no”outlet of
terminal block
s
“nc” outlet of
terminal blocks 1
Table 1
2
.3 Power input assignment
There are two different
•
Passive POE input on Ethernet port 1
(for pin allocation see Table2 on page 6)
•
External power Input through the Terminal Block connector
In both cases
the power input can be:
• 9-
42V AC or
• 8-
56V DC
Please note,
functions
properly, but the outgoing POE power pin
reversed
compared with the default
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
.2 Channel states and configuration
State of channels
1. (default)
description in the web
based GUI of the device
on
State of relays 1
-4 not energized
POE power out on eth 1
-4 on
LED indicators 1
-4 on
s
1-4 open
terminal blocks 1
-4 closed
.3 Power input assignment
There are two different
options to power the device
Passive POE input on Ethernet port 1
(for pin allocation see Table2 on page 6)
External power Input through the Terminal Block connector
the power input can be:
42V AC or
56V DC
Please note,
in case of a reverse DC power inp
ut the device
properly, but the outgoing POE power pin
compared with the default
(See Table2 on page 6)
PingBrother is watching
yournetworkdevices
State of channels
2.
off
energized
off
off
closed
open
External power Input through the Terminal Block connector
ut the device
properly, but the outgoing POE power pin
-out will be also
(See Table2 on page 6)

7
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
2.4
Ethernet
4 pieces RJ45 Fast Ethernet 100Base
RJ45
Pin
Color
1
Green
2
Green/White
3
Orange
4 Blue
5
Blue/White
6
Orange/White
7
Brown
8
Brown/White
Table 2
2
.5 POE power selector slide switch
The POE power selector slide
device.
By using them
terminal block power connector, or
power on the Ethernet ports should appe
Setting examples table
SW 1
SW 2
poe out
poe in
poe in
poe off
Please note
, if the powering
the
SW1 is on “POE in” state, the POE
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
Ethernet
ports
4 pieces RJ45 Fast Ethernet 100Base
-
TX port with passive PoE extension
Color
Function RJ45 pin for Straight cable
(MDI, EIA/TIA568A)
Green
Data TX + 1
Green/White
Data TX - 2
Orange
Data RX + 3
POE power + 4
Blue/White
POE power + 5
Orange/White
Data RX - 6
Brown
POE power - 7
Brown/White
POE power - 8
.5 POE power selector slide switch
es
The POE power selector slide
switches (Figure1 / 6)
allow full flexibility of the
By using them
can be selectedthat the unit gets
the
terminal block power connector, or
aPOE input.
It’s also selectable if the POE
power on the Ethernet ports should appe
ar or not.
Setting examples table
SW 2
-4 TB Power
connector
Description
on power in
Power injector (Figure 2 on
page 7.)
on not used
Power distributor (Figure 3 on
page 7.)
off power out
POE separator function (Figure
3 on
off power in
Using with non POE device
, if the powering
comes
via Terminal Block connector, but
SW1 is on “POE in” state, the POE
power appear
PingBrother is watching
yournetworkdevices
TX port with passive PoE extension
(MDI, EIA/TIA568A)
RJ45 pin for
Crossover cable
(MDI, EIA/TIA568A)
3
6
1
4
5
2
7
8
allow full flexibility of the
the
input power eithervia the
It’s also selectable if the POE
Description
Power injector (Figure 2 on
page 7.)
Power distributor (Figure 3 on
page 7.)
POE separator function (Figure
3 on
page 7)
Using with non POE device
via Terminal Block connector, but
power appear
s on the eth1 port.

8
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
2.6
Application example figures
Figure 2
Figure 3
Figure 4
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
Application example figures
PingBrother is watching
yournetworkdevices

9
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
Capter3
Software configuration.
3
.1 WEB based management
The PingBrother can be configured locally or remotely via
•
Default IP address: 192.168.1.234
•
Default username: admin
•
Default password: admin
3
.1.1 Status screen
On the status screen you can check the current software and hardware version,
input voltage, device internal temperature, uptime, and the states of channels.
(In case of an
AC input the voltage measurement not work properly
1.0. This
will be
Figure 5
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
Software configuration.
.1 WEB based management
The PingBrother can be configured locally or remotely via
any
Default IP address: 192.168.1.234
Default username: admin
Default password: admin
.1.1 Status screen
On the status screen you can check the current software and hardware version,
input voltage, device internal temperature, uptime, and the states of channels.
AC input the voltage measurement not work properly
will be
fixed in a later firmware version.)
PingBrother is watching
yournetworkdevices
any
web browser.
On the status screen you can check the current software and hardware version,
input voltage, device internal temperature, uptime, and the states of channels.
AC input the voltage measurement not work properly
by Firmware

10
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
3.1.2
IP event & actions configuration
In this menu you can manage the IP watchdog functions.
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
IP event & actions configuration
In this menu you can manage the IP watchdog functions.
PingBrother is watching
yournetworkdevices

11
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
Parameter specifications:
•
Watched host: can be an IP address or domain name
•
HTTP port of the watched
•
Ping delay: minimum time between two actions (
300 sec)
Please note, that the ping delay must be most definitely longer, than the
boot time of the watched device otherwise
•
Ping interval: the time between two icmp or http request
•
Action after fails: number of the lost icmp or http replay to activate the
specified action
•
Email address: mailing address for notification
•
Email subject of the notification
•
Message body of the noti
Action
specifications:
On all
channelsthe following actions
•
Do not do anything
•
Turn ON
•
Turn OFF
•
Change of state
•
Reset (changing the state of the channels for a specified reset time)
•
Reset time
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
Parameter specifications:
Watched host: can be an IP address or domain name
HTTP port of the watched
host (0-65535,
default 80)
Ping delay: minimum time between two actions (
300 sec)
Please note, that the ping delay must be most definitely longer, than the
boot time of the watched device otherwise
an infinite loop
Ping interval: the time between two icmp or http request
Action after fails: number of the lost icmp or http replay to activate the
specified action
Email address: mailing address for notification
Email subject of the notification
Message body of the noti
fication
specifications:
channelsthe following actions
can be set up:
Do not do anything
Turn ON
Turn OFF
Change of state
Reset (changing the state of the channels for a specified reset time)
Reset time
(1-60, default 3 sec)
PingBrother is watching
yournetworkdevices
Watched host: can be an IP address or domain name
default 80)
Ping delay: minimum time between two actions (
5-3600, default
Please note, that the ping delay must be most definitely longer, than the
an infinite loop
can come up.
Ping interval: the time between two icmp or http request
Action after fails: number of the lost icmp or http replay to activate the
Reset (changing the state of the channels for a specified reset time)

12
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
3.1.3
Manual operation
Manually s
witching the states of the channels
Please note
, if
operation or from the automated IP/Event menu always the last
be performed
.
It is possible
to switch
With this option the outputs can be managed by
The u
sername and password should be sent by base64 coding.
Examples:
All channel turn off:
http://PingBrothers_IP_or_hostname/protect/PBmanual.htm?Relay1=0&Relay2=0&
Relay3=0&Relay4=0
All channels
turn o
http://PingBrothers_IP_or_hostname/protect/PBmanual.htm?Relay1=
Relay3=1
&Relay4=
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
Manual operation
witching the states of the channels
via a
web browser
, if
simultaneously more commands
come from
operation or from the automated IP/Event menu always the last
.
to switch
the channel
s remotely by pure http commands.
With this option the outputs can be managed by
any 3rd
party programs remotely.
sername and password should be sent by base64 coding.
All channel turn off:
http://PingBrothers_IP_or_hostname/protect/PBmanual.htm?Relay1=0&Relay2=0&
Relay3=0&Relay4=0
turn o
n:
http://PingBrothers_IP_or_hostname/protect/PBmanual.htm?Relay1=
&Relay4=
1
PingBrother is watching
yournetworkdevices
web browser
come from
a manual
operation or from the automated IP/Event menu always the last
command will
s remotely by pure http commands.
party programs remotely.
sername and password should be sent by base64 coding.
http://PingBrothers_IP_or_hostname/protect/PBmanual.htm?Relay1=0&Relay2=0&
http://PingBrothers_IP_or_hostname/protect/PBmanual.htm?Relay1=
1&Relay2=1&

13
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
3
.1.4 Manual ping
For checking ping availability and response time an IP or host from PingBrother
3
.1.5 Passwordconfig
For
changing of the administrator password
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
.1.4 Manual ping
For checking ping availability and response time an IP or host from PingBrother
.1.5 Passwordconfig
changing of the administrator password
PingBrother is watching
yournetworkdevices
For checking ping availability and response time an IP or host from PingBrother

14
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
3
.1.6 Network configuration
Parameter specifications:
•
Host
•
Enable / disable DHCP
•
IP address (IPV4)
•
Gateway
• Su
b
•
Primary DNS
•
Secondary DNS
In case of the
enabled
allocated IP address of the device
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
.1.6 Network configuration
Parameter specifications:
Host
name
Enable / disable DHCP
client
IP address (IPV4)
Gateway
b
net mask
Primary DNS
Secondary DNS
enabled
DHCP
client in this menu can be seen by the server
allocated IP address of the device
PingBrother is watching
yournetworkdevices
client in this menu can be seen by the server

15
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
3.1.7
Time settings
There are parameters
Parameter specifications:
•
Manual settings:
•
Automatic NTP server synchronization
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
Time settings
There are parameters
to set PingBrothers clock
Parameter specifications:
Manual settings:
o Year
o Month
o Day
o Hour
o Minute
o Sec
Automatic NTP server synchronization
:
o Time zone: the difference between
your local time and GMT
o Enable NTP: if you select the manua
l settings
automatically by the NTP server
o NTP server: the
url or IP address of your NTP server
PingBrother is watching
yournetworkdevices
your local time and GMT
l settings
will be overwritten
url or IP address of your NTP server

16
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
3.1.8 Email
configuration
There are parameters for sending a notification
If your SMTP
server has no password authentication
and Password boxes.
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
configuration
There are parameters for sending a notification
email
server has no password authentication
leave empty
and Password boxes.
SSL authentication is not available
at the moment.
PingBrother is watching
yournetworkdevices
leave empty
the User Name
at the moment.

17
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
3.1.9 Syste
m
PingBrother
is capable of logging various system events and
Logs can be saved in
Log entry is made
•
ICMP ping fail
•
HTTP check fail
•
Manually s
•
Automatic responses of the IP event / actions menu
o
o
o
o
o
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
m
log
is capable of logging various system events and
Logs can be saved in
devices memory (RAM).
Log entry is made
about:
ICMP ping fail
HTTP check fail
Manually s
witching the states of the channels
Automatic responses of the IP event / actions menu
Channel reset
Channel on
Channel off
Changes the position of the channels
Notification emails
PingBrother is watching
yournetworkdevices
is capable of logging various system events and
action information.
Automatic responses of the IP event / actions menu

18
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
3.1.10
Firmware update
Browse and upload a firmware
You can use only original hardware version specific firmware. Please be
patient, the firmware update process may take up to 5 minutes.
update 1-
2 min the network switch function
After the
firmware update the Event / Action and all other user defined settings such
as password, IP address, etc. will remain.
firmware description will be included warning about it.
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
Firmware update
Browse and upload a firmware
You can use only original hardware version specific firmware. Please be
patient, the firmware update process may take up to 5 minutes.
2 min the network switch function
is also out of service.
firmware update the Event / Action and all other user defined settings such
as password, IP address, etc. will remain.
I
f this would be later
firmware description will be included warning about it.
PingBrother is watching
yournetworkdevices
You can use only original hardware version specific firmware. Please be
patient, the firmware update process may take up to 5 minutes.
During the
is also out of service.
firmware update the Event / Action and all other user defined settings such
f this would be later
differently, the

19
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
3.2
Reset the device
It is possible to reset all settings to the default
password. T
he recovery steps are
• Power
OFF
•
Press the reset button (Figure 1/1)
• Power
ON
•
Hold the reset button until all the four indicator LED
•
Release
After the reset the device IP address will be restored also to the default:
192.168.1.234
3.3 Co-
use with a standard 802.3af POE PD
PingBrother can power
properly together with them
•
The powered device (PD) 802.3af
• A
48V DC
•
The power of the PS is
powered devices
Always recommended to perform
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
Reset the device
It is possible to reset all settings to the default
, for example in case of
he recovery steps are
the following:
OFF
Press the reset button (Figure 1/1)
ON
Hold the reset button until all the four indicator LED
Release
the reset button
After the reset the device IP address will be restored also to the default:
use with a standard 802.3af POE PD
-s
PingBrother can power
s a standard IEEE 802.3af-
2003 POE devices
properly together with them
of the following conditions:
The powered device (PD) 802.3af
Mode B(midspan)
48V DC
power supply is used to supply of
the PingBrother
The power of the PS is
scaled according to the type and number of the
powered devices
Always recommended to perform
testing before usage.
PingBrother is watching
yournetworkdevices
, for example in case of
a lost
Hold the reset button until all the four indicator LED
are on (6-8 sec)
After the reset the device IP address will be restored also to the default:
2003 POE devices
, and works
Mode B(midspan)
compatible
the PingBrother
scaled according to the type and number of the

20
PingBrother EPIW104 user manual



2011 Mikroweb Internet ltd
EPIW104
User Manual
ver
.1.
2
Capter4
4.1
Technical specifications
Model
Input operating voltage(via connector or POE)
POE output voltage on all ethernet port
Total Power Budget
Max. self Power Consumption of thedevice
Max. Power Consumptionon each eth. port
Number of 10/100 POEcapableethport
Max switchingVoltage on terminal blocks
Max. switching Power onterminal blocks
Max switching current onterminal blocks
3-pol terminal block of Change-over relay
POE operatingmode selectionslideswitch
Plug-in2-pin terminal block power connector
Led indicators
Case material
Safety
OperatingTemperature
OperatingHumidity
Shock andVibration
Dimensions
Product weight
Services, events, actions
WebbasedGUI
IP address
Protocolls
Specifications
Packet features
WatchedIP address about loss of ping or http
Internal and external watchdog
Action: POEon/off
Scheduled POE management
Action: relay toggle
Action: email sending
Input voltagemeasurement
Actions due tochange of input voltage
4 port POE current measurement
Actions due tochange of current or power
Internal temperature measurement
External temperature measurement
Actions due tochange of temperature
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
Technical specifications
Input operating voltage(via connector or POE)
8-56V DC or 9-42V AC
POE output voltage on all ethernet port
8-56V DC or 9-42V AC
Total Power Budget
Max. self Power Consumption of the device
Max. Power Consumption on eacheth. port
Number of 10/100 POEcapable eth port
Max switchingVoltageonterminal blocks
Max. switching Power on terminal blocks
Max switching current onterminal blocks
3-pol terminal block ofChange-over relay
POE operatingmode selectionslideswitch
Plug-in2-pin terminal block power connector
OperatingTemperature
OperatingHumidity
5 to95% Condensing
Shock andVibration
IEC60068-2-27, IEC60068-2-6
Services, events, actions
TCP/IP, HTTP, SNMP, ICMP, IGMP
IEEE802.3, IEEE802.3u, IEEE802.3x
2k MAC address, 384kbit packket
buffer memory, max. packet lenght:
WatchedIP address about loss of pingor http
Internal andexternal watchdog
Action: POE on/off
ScheduledPOE management
Action: relay toggle
Action: email sending
Input voltagemeasurement
Actions due tochange of input voltage
4 port POE current measurement
Actions due tochange of current or power
Internal temperature measurement
External temperature measurement
Actions due tochange of temperature
PingBrother is watching
yournetworkdevices
EPIW104
8-56V DC or 9-42V AC
8-56V DC or 9-42V AC
60W
8W
15W
4
220V DC, 250V AC
30W / 230V
2A
4
4
1
4x3
steel
CE/EN60950
-30 to+80C
5to95% Condensing
IEC60068-2-27, IEC60068-2-6
149 x 81x 35 mm
450g
yes
IPV4static or dhcp
TCP/IP, HTTP, SNMP, ICMP, IGMP
IEEE802.3, IEEE802.3u, IEEE802.3x
2k MAC address, 384kbit packket
buffer memory, max. packet lenght:
1552/1536 bytes
4
yes
yes
yes
yes
yes
yes
no
no
no
yes
no
no