OTS IES16242MPp-S User manual

OT Systems Ltd. | www.ot-systems.com
Quick Installation Guide
IES16242MPp-S / version 1.1
Quick Installation Guide
IES16242MPp-S
Description: Expert Line L2 Managed 16-port 10/100/1000Base-TX (PoE+) + 4-port
10/100/1000Base-TX or 100/1000Base-FX SFP Combo Ethernet Switch
Overview: IES16242MPp-S is a new generation 16-Port Gigabit Managed PoE Switch with 16-Port
10/100/1000Base-TX and 4-Port Combo with high quality design and reliability. It is
positioning in the broadband network market, to offer and realize Ethernet data
exchange, convergence and long-distance optical transmission with efficient bandwidth
and reliable fiber optic network solutions for users. The switch complies with various
characteristics such as mini size, fan-less, low power consumption, high reliability and
stability, and easy to maintain.
Package Content
⚫Managed PoE Switch x 1
⚫Adhesive Rubber Feet x 4
⚫Mounting Accessory x 1
⚫AC Power Cord x 1
⚫RJ-45 Console Cable x 1
Read Before Install
◎Keep power off during installation
◎use Antistatic Wrist Strap correctly
◎Make sure using correct power supply, voltage must match

OT Systems Ltd. | www.ot-systems.com
Quick Installation Guide
IES16242MPp-S / version 1.1
◎Make sure enough power supply from PSU that will not overload
◎Double check the wiring ( +/- ) is correct.
◎Keep installation dry and clean.
◎Do not open the chassis
Physical Description
1. Power LED
2. System LED
3. Alarm LED
4. Port LINK LED
5. Speed LED
6. DC Power Input
7. Grounding Screw
8. Ethernet Port
9. Reset Button
10. Console port
11. SFP Port
12. AC Power Input
Installation
The installation of 19-inch standard rack is designed according to the size of 19 inch standard rack. It
can be easily installed on the rack. The specific installation steps are as follows:
Step 1: check the grounding and stability of the rack.
Step 2: install two L-brackets in the accessories on both sides of the switch panel, and fix them with
the screws provided in the accessories,
Step 3: Insert the top end of the rail into the groove directly below the metal spring.
Step 4: The rail attachment will fit into the rail, as shown in the figure below.

OT Systems Ltd. | www.ot-systems.com
Quick Installation Guide
IES16242MPp-S / version 1.1
Step 5: place the switch in a proper position in the rack, supported by the bracket; fix the L-shaped
bracket on the fixed guide slots at both ends of the rack with screws, so as to ensure that the switch
is stably and horizontally installed on the rack.
Note: good grounding of the rack is an important guarantee for anti-static, anti leakage, lightning
protection and anti-interference of the equipment, so ensure the correct installation of the rack
grounding wire; the equipment installed in the rack is generally from the bottom to the top to avoid
overload installation; avoid placing other heavy objects on the switch surface to avoid accidents;
ensure heat dissipation and air circulation.

OT Systems Ltd. | www.ot-systems.com
Quick Installation Guide
IES16242MPp-S / version 1.1
Power Input
The Industrial Switch has two redundant power inputs, PRW1 and PWR2. The Phoenix terminal
patch panel connector is located on the top panel of the switch. The front view of the patch panel is
shown below.
Step 1: Plug the positive / negative DC lines to the V + /V-terminals.
Step 2: To prevent the DC cable from loosening, use a flat screw to fix the clamp of the patch panel
connectors.
Step 3: Plug the Phoenix terminal patch panel into the patch panel socket on the top panel of the
switch.
Setup and States
a) Connect the Ethernet port of the Ethernet Switch to a PoE IP camera (PoE device) or network
device with a network cable.
b) Insert the appropriate SFP into the SFP port. Connect the fiber cable from the device (media
converter or switch) on the other end to the LC connector of the SFP.
c) After the device is powered on, the PWR indicator will all be on. If the indicators are not on,
check the power supply connection.
d) After all cables are correctly connected, the indicators will be lit as per port status LEDs.
LED
Status
Description
Power Supply (PWR)
Status
Normal
ON
Power off
System Status (SYS)
OFF
Normal
ON
System does not start
SFP Port LED (LNK)
OFF
SFP port connected

OT Systems Ltd. | www.ot-systems.com
Quick Installation Guide
IES16242MPp-S / version 1.1
ON
Data transmission enabled
Blink
SFP port disconnected
Ethernet Port (Yellow LED)
OFF
Ethernet port connected
ON
Data transmission enabled
Blink
Ethernet port disconnected
Ethernet Port (Yellow LED)
OFF
1000M
ON
10/100M
ALM
OFF
System Alarm
ON
normal
General
To ensure trouble free transportation and storage, all OT Systems products must be thoroughly
inspected, tested and properly packed before delivery. Check the product upon receipt for any
visible damage which may have been caused during shipment.
-END-