MIMAKI CJV150-75 User manual

Mimaki Europe B.V.
Sign Graphics Products
The new high quality Print&Cut entry models
Product Guide
The information in this document is subject to change without notice.
07-03-2019
V1.71EU

Mimaki Europe B.V.
Sign Graphics Products
Terms of use
•The contents of this presentation are intended only for Mimaki authorized
resellers. Authorized persons are not permitted to distribute, copy or change
this presentation without explicit approval of Mimaki Europe B.V.
•Contents and technical explanations in this presentation are based on the
test results achieved at Mimaki at the time of testing and are not a guarantee
for performance. Substrates should be tested beforehand.
•In addition, the contents in this presentation do not lead to any legal
obligations from Mimaki and Mimaki does not take any responsibility. Please
verify in advance whether your intended prints will result in sufficient
quality.
•Contents of this presentation are subject to change without prior notice for
improvement. Compositors errors reserved.
2

Mimaki Europe B.V.
Sign Graphics Products
Features
•Mimaki technologies for exceptional print quality
•Mimaki Advanced Pass System 3 (MAPS3) reduces banding and
produces smoother images
•Variable dot printing produces smoother gradients and quartertones
•Mimaki Expand Color mode is available for more vivid and high contrast
colors with RasterLink6*
•3-way intelligent heaters optimize dot gain
•A wide variety of inks broaden application
•Supports 6 different ink types: SS21, ES3, BS3, BS4, SB53 and SB54
•Printing metallic colors with high-intensity silver ink
•Wider color gamut printing with orange ink
•Light black ink produces accurate grayscale printing without color shifts
•White ink achieves high opacity printing
3
* Supported by RasterLink6 ver. 4.11 or later, and device profile ver. 3.5

Mimaki Europe B.V.
Sign Graphics Products
Features
•Versatile Print&Cut functions
•Zero margin crop mark reduces the waste of media
•Supports thin media such as heat transfer media by Cut & Print function
•Dotted line cut function cuts backing sheet leaving a few minimal joints
•Over cut and Corner cut functions cut edges sharp even using thick
media
•Segment compensation achieves accurate long-length cutting
•Continuous crop mark detection for unattended Print&Cut operation
•Several functions to support unattended operation
•Nozzle Check Unit allows printing without nozzle clogging
•UISS performs continuous ink supply while unattended printing
•Stable feeding of heavy media, max weight of 40kg and max diameter of
250mm
4

Mimaki Europe B.V.
Sign Graphics Products
System configuration
Options
MBIS3
Drying fan
Air exhaust unit
Static prevention sheet
Front cover
8x Eco-cartridge for 600ml BS3/BS4 inks
Including Rip software
PC
Works also with:
USB 2 0
5m(15ft) cable is recommended
Connection
Recommended PC configuration
CPU: Core i5 3.5GHz
Memory: 8GB
HDD: 500GB
I/F : USB2.0, 4 ports or more
ODD: DVD-ROM
Network: 1000BASE-T
Compatible OS: Windows Vista(32/64bit)
Windows 7(32/64bit)
Windows 8(32/64bit)
Windows 10(32/64bit)
Monitor: 1366x768
5

Mimaki Europe B.V.
Sign Graphics Products
Ink type
SS21 ES3 BS3 / BS4* Sb53 Sb54
Eco solvent Eco solvent
(Low odor) Solvent Sublimation Sublimation
Colors 10C*6C 4C 6C* 4C
Ink Sets
6C+WSi: Silver included 4C: High speed printing 4C: High speed printing 4C: High speed printing 4C: High speed printing
4C: High speed printing 6C: Smooth Result 6C: Smooth Result
8C: Smooth result &
vibrant expression
6C+WW: 6C plus white
printing
Lk/Or/W/Si included
Lk/Or/W 2 included
Ink
Capacity
MCYKLcLmLkOr:
-440ml cartridge
-2L Ink pack (for MBIS3)
WSi: 220ml cartridge
-440ml cartridge
-
600ml Ink pack
(with Eco-cartridge)
-2L Ink pack (for MBIS3)
-440ml cartridge
-2L Ink pack (for MBIS3) 2L Ink pack (for MBIS3)
**Up to 8 colors can be set
out of 10 colors. *BS4 has low odor *K is also available
M C Y KKY C M
M C Y KLc Lm Lk Or
MCYKKY C M
M C Y KKY C M
6
Ink type / Ink set
MT BLT YT KT KT YT BLT MT
6
M C Y KLk Or W W
M C Y KLk Or WSi

Mimaki Europe B.V.
Sign Graphics Products
Print head configuration
•1 print head configuration
•Capable of ejecting 7 different drop sizes of 4pl/7pl/8pl/14pl/16pl/24pl/35pl
•Works in high quality and high speed modes
•Delivers precision droplet placement in three sizes
7
Nozzle row length
Approx.25.4mm
(1 inch)
Nozzle width
Approx.31mm
(1.2 inch)
1-head:1440-nozzle
(180-nozzle x 8-lines)
123 4 5 6 7 8

Mimaki Europe B.V.
Sign Graphics Products
Highly versatile printer
•Larger ink drops
•3 different drop sizes are automatically selected from the 7 drop sizes,
depending on the selected print quality (profile)
•When working with SS21, the 7 drop sizes are 4/7/8/14/16/24/35pl
•For high speed printing with high densities, the variable dot technology with a
maximum dot size of 35pl is used. (45.4m²/h with SS21/BS3/BS4, and 48m²/h
with Sb53/Sb54)
•This gives the printer a wide coverage, from high resolutions, to low resolution
printing with higher densities
8
Case 1 : Maximum dot size =21pl Case 2 : Maximum dot size =35pl
Large
21ｐ
ｌ
Middle
14ｐ
ｌ
Small
4ｐ
ｌ
1 /360 inch
1 /360
inch
Large
35ｐ
ｌ
Middle
14ｐ
ｌ
Small
4ｐ
ｌ
1 /360 inch
1 /360
inch
Low density due to a gap between the dots
↓
Not suitable for high speed mode (low resolution)
High density with no gap between the dots
↓
Suitable for High speed mode

Mimaki Europe B.V.
Sign Graphics Products
1,7
3,6
5,4
7,1
8,5
10,5
12
1,9
4,2
6,2
8,2
9,8
12,2
14,3
0 5 10 15 20
Super Smooth
1440x1440,16P,Bi
High Quality
720x1440,12P,Bi
High Quality
720x1080,8P,Bi
Standard②
720x720,6P,Bi
Standard①
720x720,5P,Bi
High Speed
720x720,4P,Bi
Draft
540x720,4P,Bi
CJV150-107
CJV150-75
**
4,3
7,1
10,5
12
25
40,2
5,0
8,2
12,2
14,3
28,5
45,4
010 20 30 40 50
High Quality
720x1440,10P,Bi
Standard②
720x1080,6P,Bi
Standard①
720x720,4P,Bi
High Speed
540x720,4P,Bi
Draft
540x360,2P,Bi
Super Draft
360x360,1P,Bi
CJV150-107
CJV150-75
**
*
**
Print speed (SS21/BS3/BS4)
•Ink set: 4C, CMYK
9
PVC Banner
The print modes shown in this document are the performance of the printer itself. The profiles are created selectively depending on the media type. When the
profile is not available, use MPM-3 to create the profile for the media.
m²/h
m²/h
**
* MAPS works with “Quality priority” setting in RasterLink6
** MAPS does not work
*

Mimaki Europe B.V.
Sign Graphics Products
1,3
2,4
2,7
3,6
4,3
5,4
1,5
2,8
3,1
4,2
5,0
6,2
0 5 10 15
Super Smooth
1440x1440,20P,Bi
High Quality
720x1440,18P,Bi
Standard②
720x1080,16P,Bi
Standard①
720x1080,12P,Bi
High Speed
720x720,10P,Bi
Draft
720x720,8P,Bi
CJV150-107
CJV150-75 2,4
3,1
4,3
5,4
6,2
12,5
20,7
2,8
3,6
5,0
6,2
7,4
14,3
23,3
0 5 10 15 20 25
Super Smooth
720x1440,18P,Bi
High Quality
720x1080,14P,Bi
Standard②
720x720,10P,Bi
Standard①
720x720,8P,Bi
High Speed
540x720,8P,Bi
Draft
540x360,4P,Bi
Super Draft
360x360,2P,Bi
CJV150-107
CJV150-75
Print speed, SS21, 6C/8C ink set
•Ink set: -6C (CMYKLcLm+WW/WSi) or (CMYKOrLk+WW/WSi)
-8C (CMYKLcLmLkOr)
10
PVC Banner
m²/h
m²/h
* MAPS works with “Quality priority” setting in RasterLink6
** MAPS does not work
**
**
**
*
*
*

Mimaki Europe B.V.
Sign Graphics Products
Print speed, SS21, silver ink set
•Ink set: 6C (CMYKLcLm+WSi) or (CMYKOrLk+WW/WSi)
11
1-layer printing
(Silver only)
Metallic color printing
(Silver→Color)
0,17
0,28
0,55
0,19
0,32
0,64
1,40
00,5 11,5 2
Super Smooth
1440x1440,32P,Bi
High Qulaity
720x1440,32P,Bi
Standard
720x1080,16P,Bi
High Speed
720x1080,12P,Bi
CJV150-107
CJV150-75
*
0,86
1,39
2,21
0,96
1,60
2,55
3,18
01234
Super Smooth
1440x1440,32P,Bi
High Qulaity
720x1440,32P,Bi
Standard
720x1440,20P,Bi
High Speed
720x1080,16P,Bi
CJV150-107
CJV150-75
m²/h
m²/h
* CJV150-75 does not have the high speed mode
** MAPS does not work
**
*

Mimaki Europe B.V.
Sign Graphics Products
0,61
1,39
2,45
3,65
0,69
1,60
2,83
4,22
012345
High Quality
1440x1440,32P,Bi
Standard②
720x1440,32P,Bi
Standard①
720x1080,18P,Bi
High Speed
720x1080,12P,Bi
CJV150-107
CJV150-75 0,2
0,46
0,81
1,04
0,23
0,53
0,94
1,21
00,5 11,5 2
High Quality…
Standard②…
Standard①…
High Speed…
CJV150-107
CJV150-75
Print speed, SS21, white ink set
•Ink set: 6C+WW/WSi (CMYKLcLm/CMYKOrLk+WW/Wsi)
•3-layer printing is possible with the fast drying SS21 white ink
•Maximum speed for 1 layer white printing: 4,2 m²/h
12
1-layer printing
(White only)
2-layer printing
(Color →White / White →Color)
3-layer printing
(Color → White → Color)
m²/h
m²/h
m²/h
0,12
0,28
0,46
0,82
0,14
0,32
0,53
0,94
00,5 11,5 2
High Quality…
Standard②…
Standard①…
High Speed…
CJV150-107
CJV150-75
*
* MAPS does not work

Mimaki Europe B.V.
Sign Graphics Products
Print speed ES3, 4C ink set
•Ink set: 4C (CMYK)
13
2,8
3,5
4,9
7,1
10,5
3,1
4,0
6,2
8,2
12,2
010 20 30 40 50
High Quality
720x1440,18P,Bi
Standard②
720x1080,14P,Bi
Standard①
720x1080,10P,Bi
High Speed②
720x720,6P,Bi
High Speed①
720x720,4P,Bi
CJV150-107
CJV150-75 3,1
4,3
7,1
12,0
25,0
3,5
5,0
8,2
14,3
28,5
010 20 30 40 50
High Quality
720x1440,16P,Bi
Standard②
720x1080,10P,Bi
Standard①
720x720,6P,Bi
High Speed
540x720,4P,Bi
Billboard
540x360,2P,Bi
CJV150-107
CJV150-75
*
PVC
Banner
m²/h
m²/h
The print modes shown in this document are the performance of the printer itself. The profiles are created selectively depending on the media type. When the
profile is not available, use MPM-3 to create the profile for the media.
* MAPS works with “Quality priority” setting in RasterLink6
** MAPS does not work
**
*

Mimaki Europe B.V.
Sign Graphics Products
Print speed ES3, 6C ink set
•Ink set: 6C (CMYKLcLm)
14
2,1
2,4
3,6
4,3
2,3
2,8
4,2
5,0
0 5 10 15 20 25
High Quality
720x1440,24P,Bi
Standard
720x1080,18P,Bi
High Speed②
720x720,12P,Bi
High Speed①
720x720,10P,Bi
CJV150-107
CJV150-75
2,1
2,4
4,3
6,0
12,5
2,3
2,8
5,0
6,9
14,3
0 5 10 15 20 25
High Quality
720x1440,24P,Bi
Standard②
720x1080,18P,Bi
Standard①
720x720,10P,Bi
High Speed
540x720,10P,Bi
Billboard
540x360,4P,Bi
CJV150-107
CJV150-75
PVC Banner
m²/h
m²/h
*
* MAPS works with “Quality priority” setting in RasterLink6

Mimaki Europe B.V.
Sign Graphics Products
Print speed Sb53 ink
•Sb53 4C and 6C printing speeds
15
BMYDk(K) BMYDk(K)LbLm
m²/h m²/h
5,0
6,2
8,2
12,2
14,3
20,0
30,0
48,0
020 40 60
Super Smooth
720x1440,10P,Bi
High Quality
720x1440,8P,Bi
Standard②
720x1080,6P,Bi
Standard①
720x720,4P,Bi
High Speed②
540x720,4P,Bi
High Speed①
540x360,3P,Bi
Draft
540x360,2P,Bi
Super Draft
360x360,1P,Bi
CJV150-107 2,8
3,6
5,0
6,2
7,4
15,0
24,6
010 20 30
Super Smooth
720x1440,18P,Bi
High Quality
720x1080,14P,Bi
Standard②
720x720,10P,Bi
Standard①
720x720,8P,Bi
High Speed
540x720,8P,Bi
Draft
540x360,4P,Bi
Super Draft
360x360,2P,Bi
CJV150-107

Mimaki Europe B.V.
Sign Graphics Products
Sb53 black inks
•2 different types of black ink are available
•2 types of black ink are offered to meet customer's demand
16
Type Advantage Disadvantage
Sb53-K
•Less smoke generation during heat
transfer
•Less grainy results can be seen at
the low gradation areas
•When printing with 100%, the density is
the same as Dk ink, but the density is
lower in the areas with low gradations
Sb53-DK •Reflection density is higher at the
low gradation part
•Grainy results can be seen at the low
gradation areas
•More smoke generation during heat
transfer, compared to the K ink

Mimaki Europe B.V.
Sign Graphics Products
Print speed Sb54 ink
•Sb54, 4C printing speeds
17
KT,BLT,MT,YT
m²/h
5,0
6,2
8,2
12,2
14,3
20,0
30,0
48,0
020 40 60
Super Smooth
720x1440,10P,Bi
High Quality
720x1440,8P,Bi
Standard②
720x1080,6P,Bi
Standard①
720x720,4P,Bi
High Speed②
540x720,4P,Bi
High Speed①
540x360,3P,Bi
Draft
540x360,2P,Bi
Super Draft
360x360,1P,Bi
CJV150-107

Mimaki Europe B.V.
Sign Graphics Products
High-intensity silver ink (SS21)
•The silver ink of SS21 expresses shiny finish
•Brightness does not become lower even after laminate film is applied*
•Brightness even after 3-year acceleration test is better than ES3
18
1. ES3: Metallic gloss level gets lower when laminated
SS21: Gloss level is maintained even with lamination
Media: Avery MPI 2000
Laminate Film Avery DOL2060 •Initial brightness of SS21 is 67% higher than ES3
•Brightness of SS21 after 3-year acceleration test is still 5%
higher than ES3’s initial value
Outdoor resistance comparisonBrightness comparison
1. Laminated
2. Initial brightness of ES3 is set as 100%.
167%
137%
123%
105%
100%
65%
50%
39%
0%
50%
100%
150%
200%
初期 1年相当 2年相当 3年相当
SS21
ES3
*1The scratch resistance of SS21 silver ink is poor. Lamination is advised
Initial 1-year 2-year 3-year
ES3 w/laminate SS21w/laminate SS21w/o laminate

Mimaki Europe B.V.
Sign Graphics Products
3-type metallic color collection
•Metallic colors can be expressed by printing color on silver
•648 metallic colors designed for easy color matching
•Target metallic color can be selected from swatch library
•3-type metallic color collection
19
Type A: Chart Type B: Booklet
Type C: Patch
*Each type of metallic color collection has the same colors.
3-type metallic color collections are available in RL6

Mimaki Europe B.V.
Sign Graphics Products
Metallic color collection: Orange edition (SS21)
•Orange ink edition is added to SS21 Metallic Color
Collection’s ink set CMYKOrLk+WSi
•For printing brighter metallic colors
20
Metallic Color Collection incl. Or ink edition
•SS21 C,M,Y,K,Or,Lk+W,Si Ink set
•108 colors added!
Red/Orange colors are added
•There are total 756 colors including the regular metallic colors
Type B and C