MIMAKI CJV150-75/107 User manual

Mimaki Europe B.V.
Sign Graphics Products
The new high quality entry models
Product Guide Print&Cut
The information in this document is subject to change without notice.
18-11-2014
Ver1.1_EU

Mimaki Europe B.V.
Sign Graphics Products
Terms of use
•The contents of this presentation are intended only for Mimaki
authorized resellers. Authorized persons are not permitted to
distribute, copy or change this presentation without explicit
approval of Mimaki Europe B.V.
•Contents and technical explanations in this presentation are based
on the test results achieved at Mimaki at the time of testing and are
not a guarantee for performance. Substrates should be tested
beforehand.
•In addition, the contents in this presentation do not lead to any
legal obligations from Mimaki and Mimaki does not take any
responsibility. Please verify in advance whether your intended
prints will result in sufficient quality.
•Contents of this presentation are subject to change without prior
notice for improvement. Compositors errors reserved.

Mimaki Europe B.V.
Sign Graphics Products
Features
•Mimaki’s technologies delivers high-image quality
•Smooth image quality by waveform control and precise dot placement technology
•Variable dot printing by 3 different drop sizes of Large/Middle/Small
•Mimaki’s proprietary 3-way intelligent heater optimizes dot gain
•MAPS3 eliminates banding and delivers smooth print densities
•A wide variety of inks broaden application
•Printing exclusive metallic colors with high-intensity silver ink
•Wider color gamut printing with orange ink
•Light black ink produces accurate grayscale printing without color shifts
•White ink achieves high opacity printing
•Versatile Print&Cut functions
•Zero margin crop mark reduces the waste of media
•Supports thin media such as heat transfer media by Cut & Print function
•Dotted line cut function cuts backing sheet leaving a few minimal joints
•Over cut and Corner cut functions cut edges sharp even using thick media
•Segment compensation achieves accurate long-length cutting
•Continuous crop mark detection for unattended Print&Cut operation
3

Mimaki Europe B.V.
Sign Graphics Products
System Configurations
4
Options
MBIS3
Drying fan
Air exhaust unit
Static prevention sheet
8x Eco-cartridge for 600ml BS3 inks
Including Rip software
PC
Works also with:
USB 2 0
5m(15ft) cable is recommended
Connection
Recommended specifications
CPU: Core i5 3.2GHz
MEMORY: 8GB
HDD: 500GB
USB2.0: 4 ports or more
Optical disk drive: DVD-ROM
Windows7 Professional 64bit
Monitor: 1366x768

Mimaki Europe B.V.
Sign Graphics Products
Ink Type / Ink Set
5
10 different ink colors
4 ink set selections
①6C+WSi:Silver included
②4C:High speed printing
③8C: Smooth result & vibrant expression
④6C+WW: 6C plus white printing
Capacity:
CMYKLcLmLkOr:
440ml cartridge
2L Ink pack, for the MBIS3
White and Silver:
220ml cartridge
SS21
M C Y KLc Lm Lk Or WSi
M C Y KKY C M
M C Y KLc Lm Lk Or
M C Y KLc Lm WSi
M C Y KLc Lm W W

Mimaki Europe B.V.
Sign Graphics Products
Ink Type / Ink Set
6
Capacity
CMYK:
600ml Ink pack, for the Eco-cartridge
2L Ink pack, for the MBIS3
Eco-cartridge needs to be ordered extra
BS3
4 Colors
4C :
Ink set
4C : High speed printing
M C Y KKY C M
M C Y KKY C M
Sb53
7 Colors
6C：
*K ink is also available
Ink set
4C : High speed printing
6C : Smooth and vibrant colors
Capacity
BMYKLbLm:
440ml cartridge
2L Ink pack, for the MBIS3
M B Y Dk Lb Lm
M B Y Dk Dk Y B M
M B Y Dk Lb Lm B M

Mimaki Europe B.V.
Sign Graphics Products
Head layout
•1 Print head is incorporated
•Ejects 7 different drop sizes of 4pl/7pl/8pl/14pl/16pl/24pl/35pl
•Prints both high quality mode and high speed mode
7
Nozzle row length
Approx.25.4mm
(1 inch)
Nozzle width
Approx.31mm
(1.2 inch)
1-head:1440-nozzle
(180-nozzle x 8-lines)
123 4 5 6 7 8

Mimaki Europe B.V.
Sign Graphics Products
Highly versatile printer
•Larger Ink drop
•3 different drop sizes are automatically selected from 7drop sizes, depending
on the selected print quality (profile)
•When working with SS21, the 7 drop sizes are 4pl,7pl,8pl,14pl,16pl,24pl, and 35pl
•High speed printing with high densities is attained by taking advantage of the maximum
drop size of 35pl
•The variable dot technology, with a maximum dot size of 35pl, is used for the highest
productivity of 45.4m²/h with SS21/BS3 and 48m²/h with SB53
•This gives the printer a wide coverage, from high resolutions with high qualities to low
resolution printing, with higher densities
8
Case 1 : Maximum dot size =21pl Case 2 : Maximum dot size =35pl
Large
21ｐｌ
Middle
14ｐｌ
Small
4ｐｌ
1 /360 inch
1 /360
inch
Large
35ｐｌ
Middle
14ｐｌ
Small
4ｐｌ
1 /360 inch
1 /360
inch
Low density due to an gap between the dots
↓
Not suitable for high speed mode (low resolution)
High density with no gap between the dots
↓
Suitable for High speed mode

Mimaki Europe B.V.
Sign Graphics Products
Print Speed (SS21/BS3)
•Ink set: 4C, CMYK
9
PVC Banner
㎡/h㎡/h
1,7
3,6
5,4
7,1
8,5
10,5
12
1,9
4,2
6,2
8,2
9,8
12,2
14,3
0 5 10 15 20
Super Smooth
1440x1440,16P,Bi
High Quality
720x1440,12P,Bi
High Quality
720x1080,8P,Bi
Standard②
720x720,6P,Bi
Standard①
720x720,5P,Bi
High Speed
720x720,4P,Bi
Draft
540x720,4P,Bi
CJV150-107
CJV150-75
4,3
7,1
10,5
12
25
40,2
45,4
010 20 30 40 50
High Quality
720x1440,10P,Bi
Standard②
720x1080,6P,Bi
Standard①
720x720,4P,Bi
High Speed
540x720,4P,Bi
Draft
540x360,2P,Bi
Super Draft
360x360,1P,Bi
CJV150-107
CJV150-75
The print modes in this document is the performance of the printer. The media profiles are created depending on the media type.
Creating profiles with MPM II is possible, when the media profile is not available.

Mimaki Europe B.V.
Sign Graphics Products
1,3
2,4
2,7
3,6
4,3
5,4
1,5
2,8
3,1
4,2
5,0
6,2
0 5 10 15
Super Smooth
1440x1440,20P,Bi
High Quality
720x1440,18P,Bi
Standard②
720x1080,16P,Bi
Standard①
720x1080,12P,Bi
High Speed
720x720,10P,Bi
Draft
720x720,8P,Bi
CJV150-107
CJV150-75
Print Speed, SS21, 8C/6C ink set
•Ink set: 6C(CMYKLcLm+WW/WSi) / 8C(CMYKLcLmLkOr)
10
㎡/h
㎡/h
PVC Banner
2,4
3,1
4,3
5,4
6,2
12,5
20,7
2,8
3,6
5,0
6,2
7,4
14,3
23,3
0 5 10 15 20 25
Super Smooth
720x1440,18P,Bi
High Quality
720x1080,14P,Bi
Standard②
720x720,10P,Bi
Standard①
720x720,8P,Bi
High Speed
540x720,8P,Bi
Draft
540x360,4P,Bi
Super Draft
360x360,2P,Bi
CJV150-107
CJV150-75

Mimaki Europe B.V.
Sign Graphics Products
Print Speed, SS21, Silver ink set
•Ink set: 6C (CMYKLcLm+WSi)
11
1-layer printing
(Silver only)
Metallic color printing
(Silver→Color)
㎡/h
㎡/h
0,17
0,28
0,55
0,19
0,32
0,64
1,40
0 0,5 1 1,5 2
Super Smooth
1440x1440,32P,Bi
High Qulaity
720x1440,32P,Bi
Standard
720x1080,16P,Bi
High Speed
720x1080,12P,Bi
CJV150-107
CJV150-75
0,86
1,39
2,21
0,96
1,60
2,55
3,18
01234
Super Smooth
1440x1440,32P,Bi
High Qulaity
720x1440,32P,Bi
Standard
720x1440,20P,Bi
High Speed
720x1080,16P,Bi
CJV150-107
CJV150-75
*CJV150-75 does not have high speed mode

Mimaki Europe B.V.
Sign Graphics Products
0,61
1,39
2,45
3,65
0,69
1,60
2,83
4,22
0 1 2 3 4 5
High Quality
1440x1440,32P,Bi
Standard②
720x1440,32P,Bi
Standard①
720x1080,18P,Bi
High Speed
720x1080,12P,Bi
CJV150-107
CJV150-75
0,2
0,46
0,81
1,04
0,23
0,53
0,94
1,21
0 0,5 1 1,5 2
High Quality…
Standard②…
Standard①…
High Speed…
CJV150-107
CJV150-75
Print Speed, SS21, White ink set
•3-layer printing is possible with the fast drying SS21 white ink
•10.5 m²/h maximum, when printing white ink only
12
1-layer printing
(White only) 2-layer printing
(Color →White / White →Color)
㎡/h
3-layer printing
(Color → White → Color)
m²/h
m²/h
m²/h
0,12
0,28
0,46
0,82
0,14
0,32
0,53
0,94
0 0,5 1 1,5 2
High Quality…
Standard②…
Standard①…
High Speed…
CJV150-107
CJV150-75

Mimaki Europe B.V.
Sign Graphics Products
Outstanding Speed, Sb53 inks
•Sb53 4C and 6C printing speeds
13
BMYDk(K) BMYDk(K)LbLm
m²/h m²/h
5,0
6,2
8,2
12,2
14,3
20,0
30,0
48,0
020 40 60
Super Smooth
720x1440,10P,Bi
High Quality
720x1440,8P,Bi
Standard②
720x1080,6P,Bi
Standard①
720x720,4P,Bi
High Speed②
540x720,4P,Bi
High Speed①
540x360,3P,Bi
Draft
540x360,2P,Bi
Super Draft
360x360,1P,Bi
CJV150-107
2,8
3,6
5,0
6,2
7,4
15,0
24,6
010 20 30
Super Smooth
720x1440,18P,Bi
High Quality
720x1080,14P,Bi
Standard②
720x720,10P,Bi
Standard①
720x720,8P,Bi
High Speed
540x720,8P,Bi
Draft
540x360,4P,Bi
Super Draft
360x360,2P,Bi
CJV150-107

Mimaki Europe B.V.
Sign Graphics Products
Outstanding Speed, Sb53 inks
•2 different types of black ink
•2 types of black ink are offered to meet customer's demand
14
Type Advantage Disadvantage
Sb53-K
•
Less smoke generation, during
heat transfer
•
Less grainy results can be seen at
the low gradation areas
•When printing with 100%, the density is
the same as Dk ink, but the density is
lower in the areas with low gradations
Sb53
-
DK
•
Reflection density is higher at the
low gradation part
•
Grainy results can be seen at the low
gradation areas
•
More smoke generation during heat
transfer, compared to the K ink

Mimaki Europe B.V.
Sign Graphics Products
High-intensity Silver ink (SS21)
•The Silver ink of SS21 expresses shiny finish
•Brightness does not become lower even after laminate film is applied*
•Brightness even after 3-year acceleration test is better than ES3
15
①ES3:
Metallic gloss level gets lower when laminated
②SS21:
Gloss level is maintained even with laminate
Media:Avery MPI 2000
Laminate Film Avery DOL2060 •Initial brightness of SS21 is 67% higher than ES3
•Brightness of SS21 after 3-year acceleration test is still 5%
higher than ES3’s initial value
Outdoor resistance comparison
Brightness comparison ①Laminated
②Initial brightness of ES3 is set as 100%.
167%
137%
123%
105%
100%
65%
50% 39%
0%
50%
100%
150%
200%
初期
1年相当
2年相当
3年相当
SS21
ES3
*1The scratch resistance of SS21 Silver ink is poor. Laminate is advised.
Initial 1-year 2-year 3-year
ES3 w/
laminate SS21w/
laminate SS21w/o
laminate

Mimaki Europe B.V.
Sign Graphics Products
3-type Metallic Color Collection
•Metallic color is expressed by printing color on silver
•648 metallic colors designed for easy color matching
•Target metallic color can be selected from swatch library
•3-type Metallic Color Collection
16
Type A: Chart Type B: Booklet
Type C: Patch
*Each type of Metallic Color Collection has the same colors.
3-type Metallic Color Collections are available in RL6

Mimaki Europe B.V.
Sign Graphics Products
Stunning Quality
•New orange ink with SS21
•Wider gamut with new Orange ink
•Orange ink is added as an process color
•Covering approx. 94.8% of the PANTONE coated
color chart. 7% more than with 4C only
•The large color gamut makes it easy possible to
reproduce corporate colors, etc.
17
M C Y KLc Lm Lk Or

Mimaki Europe B.V.
Sign Graphics Products
-120
-100
-80
-60
-40
-20
0
20
40
60
80
100
120
-120 -100 -80 -60 -40 -20 0 20 40 60 80 100 120
CMYKLcLmLkOr
CMYK
PANTONE近似色
Stunning Quality
•SS21 with Orange ink
18
High reproducibility
with bright, fresh
Orange
Less freshness
without Orange ink
CMYKLcLmLk+OrCMYKLcLm
Gamut comparison Comparing print results
*PANTONE solid chips coated(1085 colors)
Colors of PANTONE

Mimaki Europe B.V.
Sign Graphics Products
Stunning Quality
•SS21 with Light-black ink
•High quality Monochrome color reproduction with the new Light-Black ink
•Smooth color balance without color shifting, reproducing high quality
monochrome smooth and clear grey output
19
CMYKLcLmLkOr
CMYKLcLm
•Clear grey
•Smooth skin
•Reddish grey
•Skin w/grainy
appearance
•Reddish grey •No color shift and
smooth gradation
CMYKLcLmLkOr
CMYKLcLm

Mimaki Europe B.V.
Sign Graphics Products
Stunning Quality
•High density White ink
•Vivid color printing even on transparent/colored media
•By under-laying white ink before printing the colors
•Higher opacity, is attained by using an larger ink droplet
20
Transmission density: 0.36
CJV150
Transmission density: 0.27
Older generation printers
Density comparison (White - single layer)
Density: 33% UP
Productivity: 230% Up
Print mode: 720x1440,32P,Bi
Productivity: 2.07m²/h
Maximum drop size: 24pl
Media: PET
Print mode: 720x1440,32P,Bi
Productivity: 0.9m²/h
Maximum drop size: 14pl
Media: PET
*White –200% print
*Light-up, Mimaki logo underneath