MIMAKI CJV30-60 User manual

Mimaki Europe B.V.
Sign Graphics Products
162 cm
62cm 103 cm 137.1 cm
Product Guide
24-04-2014
V1.2EU
The information in this document is subject to change without notice
Now with MAPS
Mimaki Advanced Pass System

Mimaki Europe B.V.
Sign Graphics Products
Terms of use
•The contents of this presentation are intended only for Mimaki authorized
resellers. Authorized persons are not permitted to distribute, copy or change
this presentation without explicit approval of Mimaki Europe B.V.
•Contents and technical explanations in this presentation are based on the
test results achieved at Mimaki at the time of testing and are not a guarantee
for performance. Substrates should be tested beforehand.
•In addition, the contents in this presentation do not lead to any legal
obligations from Mimaki and Mimaki does not take any responsibility. Please
verify in advance whether your intended prints will result in sufficient
quality.
•Contents of this presentation are subject to change without prior notice for
improvement. Compositors errors reserved.
2

Mimaki Europe B.V.
Sign Graphics Products
Newly developed
reduced production time
Automatic media clamp function
(Positions: off/low/middle/high)
Achieve high quality
Print Head
Continuous (overnight) printing
Automatic change of double ink cartridge
Cutter head
Tool holder
Intelligent heater Automatic
take-up device
CJV30 Design
3

Mimaki Europe B.V.
Sign Graphics Products
Concept and features
•High quality printing, up to 1440 dpi
•same as the JV33 Series
•Speed comparable to JV33
•max speed 17.5 m²/h, standard mode 11.9 m²/h
•Cutting speed up to 30 cm/s
•MAPS, Mimaki Advanced Pass System, included
•Printing with higher quality at higher speeds
•Available from firmware version 3.20 and higher
4

Mimaki Europe B.V.
Sign Graphics Products
Concept and features
•Automatic Media Clamp function
•for automated switching from printing to cutting
•Continuous Crop Mark detection
•for accurate contour cutting and increases the productivity
•Cuts the image directly after printing
•using fast-drying SS21 solvent ink
5

Mimaki Europe B.V.
Sign Graphics Products
Concept and features
•High density, fast drying white ink
•Widens the range of applications
•Simultaneous white and full color printing and white ink
overlay function
•UISS
•Continuous printing with the Uninterrupted Ink Supply System
•Space savings up to 40% in relation to purchasing a
separate printer and cutter.
•Bundled RIP, cutting and creation software
•Rasterlink Pro5 SG, FineCut, Simple Studio,
•Plug-ins for Adobe Illustrator and Corel Draw
6

Mimaki Europe B.V.
Sign Graphics Products
Max. Print/Cut Width
610mm (24.0”) Max. Print/Cut Width
1020 mm (40.2”)
Media Width 620mm (24.4’’) Media Width 1030mm (40.6’’)
Unique in its size, new markets/users and affordable
Target markets –CJV30-60 / CJV30-100
Target users Applications
Car/van fleet hire Vehicle graphics
Companies with large
fleet Vehicle graphics
Copy shops Posters, displays, stickers
Design agencies Displays for retail, stickers
Label producers Labels
Large retail chains In house production of in
store communication
Retail car dealers Vehicle graphics
Schools and colleges In house
signs/communication
Small screen printers Posters, displays, stickers,
labels
Smaller sign makers Posters, displays, stickers,
labels
The CJV30-60/100 are unique in its sizes
and target different markets than the
CJV30-130 and CJV30-160.
Examples of potential end users and
applications are listed.
62cm 103 cm
7

Mimaki Europe B.V.
Sign Graphics Products
Print service providers and sign makers engaged in the production of large sized signs
The CJV30-130 and CJV30-160 are typical
products for professional sign makers
and print houses. The CJV30 Series has
many characteristics of the award
winning JV33 series, making it a very
strong printer/cutter.
Target markets CJV30-130 / CJV30-160
Target users Applications
Sign makers and print houses/ print
service providers
Outdoor signs, POP displays, posters, floor
and window signs, stickers and labels
137.1 cm 162 cm
Max. Print/Cut Width
1361mm (53.6”) Max. Print/Cut Width
1610 mm (63.4”)
Media Width 1371mm (54.0’’) Media Width 1620mm (63.4’’)
8

Mimaki Europe B.V.
Sign Graphics Products
•Thanks to the combination
of the high speed print
head and the SS21 ink,
CJV30 series prints with
excellent performance
•Also the design of ink color
arrangement contributes to
high speed and high quality
printing
High speed print head
9

Mimaki Europe B.V.
Sign Graphics Products
CJV30 Printing speed
10
When printing in the lowest pass of each resolution with high speed scan, MAPS can be set only to minus
8
9,8
13,3
9,4
11,4
16,7
0 2 4 6 8 10 12 14 16 18 20
MAPS OFF
MAPS (目安値)
8,3
10,2
14
9,7
11,9
17,5
0 2 4 6 8 10 12 14 16 18 20
MAPS OFF
MAPS (目安値)
m²/h
m²/h
CJV30-160(4C)
CJV30-130(4C)
540x720,4P,Bi,Hi
540x1080,6P,Bi,Hi
720x1080,6P,Bi,Hi
540x720,4P,Bi,Hi
540x1080,6P,Bi,Hi
720x1080,6P,Bi,Hi
Optimum
value
Optimum
value

Mimaki Europe B.V.
Sign Graphics Products
MAPS becomes available, by upgrading the F/W*1of the CJV30. MAPS
reduces banding even printing in lower passes modes (high production
mode).
The customers who have not used lower passes modes
because of the appearance of banding can increase
productivity by taking advantage of MAPS.
CJV30 Series adding MAPS
•The effect of MAPS
•The banding is reduced even in lower passes modes, meaning able to
print without banding at higher speeds
11
The effect of MAPS varies depending on print mode, print data, and media.
MAPS does not guarantee the improvements of the whole image quality.
*1 CJV30-130/160→Ver3.20 or later

Mimaki Europe B.V.
Sign Graphics Products
What is MAPS?
•The way to eject ink with MAPS is different then the normal
pass
•The ordinary pass discharges ink droplets in a band, but when using
MAPS, ink drops are fired sparsely at the boundaries of passes.
•This reduces banding which tends to appear when printing in high
production (Low pass) mode
12
JV33 × MAPS
MAPS: OFF (Normal) MAPS: ON
Ejects ink in bands Ejects ink sparsely
Scan direction
Feed direction

Mimaki Europe B.V.
Sign Graphics Products
Image quality comparison
13
MAPS OFF: 17.5㎡/h MAPS ON (-20%): 14㎡/h
C100Y100 C100Y100
Banding appears Banding is reduced
•MAPS Off vs MAPS Optimum
•Print mode: 540x720, 4P, Bi, Hi
•Machine: CJV30-160(4C)
•Media: GPVC
•Ink: SS21

Mimaki Europe B.V.
Sign Graphics Products
Print speed comparison
•MAPS: Off vs MAPS +50%
14
Except for the minimum passes, MAPS can be set in plus.
540x1080,12P,Bi,Hi
720x1080,12P,Bi,Hi
720x1440,16P,Bi,Hi
540x1080,12P,Bi,Hi
720x1080,12P,Bi,Hi
720x1440,16P,Bi,Hi
5,5
7,5
9,1
3,7
5
6,1
0 2 4 6 8 10 12 14 16 18 20
MAPS OFF
MAPS (+50%)
5,4
7,2
8,7
3,6
4,8
5,8
0 2 4 6 8 10 12 14 16 18 20
MAPS OFF
MAPS (+50%)
㎡/h
㎡/h
CJV30-160(4C)
CJV30-130(4C)

Mimaki Europe B.V.
Sign Graphics Products
Image quality comparison
•MAPS Off vs MAPS +50
•Print mode: 540x1080, 12P, Bi, Hi
•Machine: CJV30-160(4C)
•Media: GPVC
•Ink：SS21
15
MAPS OFF: 6.1㎡/h MAPS ON (+50%): 9.1㎡/h
No bleeding, and no banding Bleeds a little, but no banding

Mimaki Europe B.V.
Sign Graphics Products
Example of the use of MAPS
For the standard mode of 540x1080,12P,Bi,Hi (6.1m²/h)
When printing in the lowest pass of each resolution with high speed scan, MAPS does not work when the value is set
to 0% or more (plus).
The set value of MAPS above is just examples. The value can be changed according to customer’s situation.
540x1080,12P,Bi,Hi (6.1m²/h)
Set MAPS-14%*
in the print mode of
540x1080,6P,Bi,Hi
Prints in high production mode
without banding
Increases productivity of standard
mode and print without banding
Prints in high quality mode without
decreasing the print speed too much
from standard mode
Productivity: 10m²/h Productivity: 8m²/h Productivity: 5.5m²/h
①②③
Set MAPS+30%
in the print mode of
540x1080,12P,Bi,Hi
Set MAPS+50%
in the print mode of
720x1440,16P,Bi,Hi
16

Mimaki Europe B.V.
Sign Graphics Products
•The automatic Media Clamp function contributes to
perfectly printing on every inch of the media
without handling it
•Also printing is done perfectly without the media
peeling after cutting
Position of clamps during printing
During printing all clamps are down.
The clamps can be adjusted in three
levels (low/middle/high), depending on
the thickness of the media.
Position of clamps during cutting
During cutting the clamps on both sides
are down. For wider models (100, 130,
160) a third clamp in the middle is down.
The clamps which are not needed are
automatically lifted.
Automatic
clamp lifting
Automatic Media Clamp function
17

Mimaki Europe B.V.
Sign Graphics Products
The fast drying SS21 ink and Automatic Media Clamp Function win every time.
Automatic Media Clamp function
•Automatic switching from printing to cutting with the
automatic Media Clamp function is handy and saves time.
18

Mimaki Europe B.V.
Sign Graphics Products
•With Continuous Crop Mark Detection
•For precise contour cutting of printed
images, such as stickers, the optical sensor
detects register marks that are printed on
the media.
•By continuously detecting a maximum of 4
register marks nested images in both X and
Y axis direction can be cut aligning each
image automatically.
Even when lamination is done after printing, the
machine can automatically cut contours using this
automatic correction function.
Correction on every data.
Correction
part
High accuracy, no matter how many copies.
Production and accuracy
19

Mimaki Europe B.V.
Sign Graphics Products
•A proprietary technology of Mimaki
All Mimaki cutters include Mimaki’s original Half-Cut
function. This function produces a series of half- and
die-cuts leaving a few connection points that keep the
image in place. When the job is done the sticker/
image can be taken out easily or the complete sheet
or roll can be sent to the customer. Various media
without backing sheet can also be Half-Cut.
A
Backing sheet
Adhesive sheet
Cut line
A A B
B
Cutter
A = Die cut (through cut)
B = Half cut (cut through half the media)
Original die cutting makes different finish
Half-Cut function
20