mindfull Learning Hut User manual

1.
2.
Slide the seat & side around the
end of the base. Fasten using
x14 cross dowels &
x14 45mm bolts.
Ensure the
tall side is on
the Left.
Position stringers
with the short side
to the left.
Fix stringers to sides
using x6 cross dowels
& x6 32mm bolts.
Ensure the stringer with
fastening holes is at the back.
Front
Left
Right
Front
Back
Left
Right
Assembly instructions:
x2 Long Fixing Bar
x22 45mm Bolt x10 32mm Bolt x12 20mm Bolt
x18 Cross Dowel
-Flat head screwdriver
-Hex head driver/alan key
You have received: Tools required:
Hut
Learning
mindfullspaces.com 1/3

Back
4.
5.
To position the roof,
ensure the cut
grooves are on the
bottom and
line up the corners
with the stringer
profile.
Short side on the left.
Push the fixing
bars through the
holes in the roof
and sides. Fix in
place using x6
20mm bolts.
Front
Left
Right
3. Slide each felt rafter
into the slots in the
timber stringers.
Front
Hut
Learning
mindfullspaces.com 2/3

6.
7.
8.
Connect the dowel
spacers to the chim-
ney and then the back
stringer using x4
32mm bolts.
Connect the bottom of
the chimney to the
base using x2 45mm
bolts & x2 cross dowels.
Fix table leg & table
top in place using
x2 cross dowels &
x2 45mm Bolts.
Fix table leg & table
top in place using
x2 cross dowels &
x2 45mm Bolts.
Hut
Learning
mindfullspaces.com 3/3