Minetan Bronze Babe Personal User manual

CUSTOMER CARE
FAILURE TO OPERATE
IMPORTANT SAFETY PRECAUTIONS
TAN.HANDY OPERATION MANUAL
REMOVING THE SPRAY TAN GUN
1. To begin, attach the
Tan.Handy spray tan gun to
the Tan.Handy mini turbine
by inserting the bottom of
the handle of the spray tan
gun into the connector of
the mini-turbine.
2. Attach the Tan.Handy
spray tan gun with the
‘quick-connect’ style tting.
This will lock the spray tan
gun rmly into place.
To remove the Tan.Handy mini-
turbine for cleaning and relling
solution cup, detach the spray
gun with the ‘quick-connect’
tting and remove it from the
mini-turbine.
3. Once the spray tan
gun is attached to the
mini-turbine, insert the
power cord into the
device and in the wall
plug and turn power
on at the wall switch.
Before using this Tan.Easy Product, read all instructions and cautionary markings
in this manual and on the device. When using an electrical appliance, basic
precautions should always be followed:
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:
1. Do not leave product when plugged in. Unplug from outlet when not in use and
before servicing.
2. Indoor Use ONLY. Do not use outdoors or on wet surfaces. Store Indoor ONLY.
3. Do not allow to be used as a toy. Close attention is necessary when used by or
near children.
4. This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
5. Use this device only for its intended function and do not use attachments not
recommended by the authorized Tan.Easy Pro Tools manufacturer.
6. Do not use the device if the cord is damaged. In the event of damage
discontinue use immediately. If the supply cord is damaged, it must be replaced
by the authorized Tan.Easy Pro Tools manufacturer.
7. If device is not working as it should, has been dropped, damaged, leoutdoors,
or dropped into water, do not use, contact Tan.Easy Pro Tools Customer Care via
the website or regional telephone number.
8. Do not pull or carry by cable, use cable as a handle, close a door on cable,
or pull cable around sharp edges or corners. Keep cable away from heated
surfaces.
9. Do not unplug by pulling on cable. To unplug, grasp the plug, not the cable.
10. Do not handle plug with wet hands.
11. Turn oall controls before unplugging.
12. Do not spray ammable or combustible liquids, such as gasoline, or use in areas
where they may be present.
13. Do not use without the lter in place.
14. Do not use an extension cord unless the cord complies with local region
electrical safety standards.
15. Periodically inspect the power cord for signs of damage
16. Do not use a uid having a ash point higher than 60ºC. When a combustible
liquid is sprayed there can be danger of re or explosion, especially in a closed
area. Read instruction manual before operating.
17. Fuse is only able to be replaced by manufacturer.
IMPORTANT: This device is designed for 220-240V or 120V respectively depending on
region. Always check that the voltage of your electricity supply matches the voltage
of your Tan.Easy Pro Tools device.
1. Do not use this product with a voltage inverter or any device designed to convert
the electrical supply to 220-240V or 120V from a dierent source.
2. Always ensure that your appliance
is connected to a properly earthed
power supply. Your Tan.Easy Pro Tools
Device is a class II electrical appliance.
Thank you for choosing to purchase this Tan.Easy Pro Tools product. Your Tan.Easy Pro
Tools device will be covered for parts only for 12 months from the date of purchase, as
detailed in the terms of the Tan.Easy Pro Tools guarantee on taneasyprotools.com.
If you have a query about your Tan.Easy Pro Tools product, contact Tan.Easy Pro Tools
by going to the website taneasyprotools.com.
Most queries can be solved by our frequently asked questions online. Alternatively you
can contact your local Tan.Easy representative in your region.
Please state your serial number for any warranty claims you have. Your serial number
can be found on the rating plate, which is on the base of your machine or below:
In the unlikely event that your Tan.Handy device does not operate correctly,
check that the Tan.Handy product and main power supply are switched on, and
that power is available.
For UK plugs, please ensure that the tted fuse is intact and functioning; if it is not,
replace it with an identically rated British Standard Fuse.
If in doubt or for further advice, please visit the Support and Trouble shooting
page at taneasyprotools.com or contact an approved Tan.Easy stockist or
contact Tan.Easy Customer services for further advice.
REVISION DATE 9.07.15 #1
All rights are reserved. No part of this document may be photocopied, reproduced
or translated to another language without prior written consent of Tan.Easy Pro
Tools.NOTICE
The information contained in this document is subject to change without notice
and should not be construed as a commitment by Tan.Easy Pro Tools. Tan.Easy Pro
Tools assumes no responsibility for any errors that may appear in this document nor
does it make expressed or implied warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of merchantability and
tness for a particular purpose. Tan.Easy Pro Tools shall not be liable for incidental
or consequential damages in connection with or arising out of the use of this
document and the program material.
The MineTan Tan.Handy has been designed by the team
at Tan.Easy Pro Tools, the experts in professional tanning
equipment, to give you the perfect spray tan at home.
PARTNERING WITH TAN.EASY PRO TOOLS
ASSEMBLY
BRONZE BABE
PERSONAL
SPRAY TAN KIT
TROUBLESHOOTING Refer to taneasyprotools.com
This is for example purposes only. Note your serial number for future reference
SERIAL NUMBER
SERIAL
NUMBER
SERIAL
NUMBER
Do not pull
on cables.
Do not submerge
in water or get wet.
Do not use near
open ames
FOR TROUBLE SHOOTING & SUPPORT GO TO
TANEASYPROTOOLS.COM
REGISTER YOUR 12 MONTH GUARANTEE
TANEASYPROTOOLS.COM
TAN.EASY PRO TOOLS
80 Market St, South Melbourne, 3205 TANEASYPROTOOLS.COM
FOR MORE INFORMATION SEE OPERATION MANUAL MADE IN CHINA
TAN.EASY PRO TOOLS
80 Market St, South Melbourne, 3205 TANEASYPROTOOLS.COM
FOR MORE INFORMATION SEE OPERATION MANUAL MADE IN CHINA
TAN.HANDY MOBILE SPRAY TAN GUN
ITEM NO# 1001001 M1002-18000
150W 120V~60HZ 1.2A
TAN.HANDY MOBILE SPRAY TAN GUN
ITEM NO# 1001001 M1002-18000
150W 240V~60HZ 1.2A

CLEANING YOUR TAN.HANDY SPRAY TAN GUN
CLEANING YOUR TAN.HANDY FILTER
The Tan.Handy Filter is located at the front of the unit as pictured below.
IMPORTANT! Please disconnect from supply circuit before cleaning or
removing lters.
SPRAYING SIDE TO SIDE
ACROSS THE BODY
SPRAYING UP & DOWN
THE BODY
SPRAYING SIDE TO SIDE ACROSS THE BODY
Set the nozzle fan ‘Horizontal ’. This spray
pattern is perfect for spraying side to side
ie. leto right – right to leacross the body.
SPRAYING UP & DOWN THE BODY
Set the nozzle fan ‘Vertical’. This spray
pattern setting is perfect for spraying up
and down, top to bottom of the body.
5. OPERATION
POWER ON : AIRFLOW
Turn the device ‘on’ by pressing the on switch. The Tan.
Handy has an intelligent Air-Smart Switch, so with just
turning it on, it controls the airow for the perfect spray.
This creates awless spray tanning results every time.
6. SPRAY TAN TECHNIQUE
Holding the Tan.Handy approximately 10 -15cm (4 - 6”) away, start at the feet
and work up, using sweeping, steady motions, keeping the Tan.Handy moving
at all times as holding in one spot too long may result in dark spots.
If a dark spot occurs, smooth our immediately with the Application Mitt and
continue spraying. Work your way up the entire body, making sure to get
complete and even coverage. Avoid spraying directly your heels, knees, and
elbows to prevent deeper tanning in these areas.
For best results refer to MineTan’s A Picture Perfect Finish, How to Spray Tan
recommended spray tan poses’ for the perfect spray tan.
7. Allow tan to dry before wearing clothing. Follow your preferred product
instructions for best results when applying the spray tan. Avoid swimming or
exercising, for the next 24 hours.
Clean your Tan.Handy aer each use. Do not use any alcohol, acetone, petrol or
any abrasive-cleaning agents.
1. Remove the spray tan gun from the Tan.Handy Mini Turbine.
2. Unscrew the cup from the Spray Gun and empty any un-used solution from
the cup.
3. Rinse the empty solution cup with warm water until clean and then ll the
cup about ¼full of warm water.
4. Insert the cup and screw tightly, back into the spray tan gun and re-connect
to the mini-turbine.
5. Turn on your Tan.Handy and direct the spray tan gun into the sink and spray
the clean water through until the cup is empty. This will clean through the
needle and out to the spray-pattern nozzle.
8. Disconnect the spray tan gun from the mini turbine and unscrew the cup.
9. Wipe all areas dry with a cloth including the cup and Tan.Handy ready for
the next use.
IMPORTANT! You must not submerge the spray gun under water. If
your Tan.Handy has excess spray solution, wipe down with cleaning
wipes. Alternately you can use a smooth cloth (avoid anything
abrasive) with a general glass cleaner to maintain the gloss nish.
3. Please leave to dry completely.
1. Remove the lter cover from the
mini turbine.
2. Wash under cold water. Do not
use detergents to clean the lter.
STORAGEUSING YOUR TAN.HANDY
MANUFACTURER’S GUARANTEE
1. Always allow the Tan.Handy to cool down before storing away.
2. When the Tan.Handy has cooled down, fold the power cord in the same
way as it was rst delivered in its packaging. Do not wrap the power cord
around the Tan.Handy as this can strain the cord and cause premature
power cord failure.
1. Prior to tanning, make sure you exfoliate your skin in the shower using the
Exfoliating Mitt. Exfoliating allows for a smoother application as well as helping
the tan to fade evenly.
2. Be sure skin is completely clean and dry. Do not apply any moisturisers, oils,
deodorants or perfumes prior to use. Waxing or shaving should also be done
at least 24 hours prior to tanning.
3. Put hair up and cover with plastic cap, remove all jewelery.
4. SETTING SPRAY PATTERN
Adjusting the spray-pattern nozzle of your Tan.Handy to suit your preferred style of
spray tanning.
All Tan.Easy Pro Tools devices are individually tested before leaving the factory.
However in the unlikely event of the product providing defective due to faulty
workmanship or materials, then, at its sole discretion, Tan.Easy Pro Tools will repair
or replace the product at no charge with an identical or equivalent product
within one year from the original date of purchase. A replacement product
assumes the remaining warranty of the original product, which ever provides
longer coverage for you. When a product is exchanged, any replacement item
becomes your property and the replaced item becomes property of Tan.Easy
Pro Tools.
To claim under this guarantee please visit ‘taneasyprotools.com/warranty-and-
guaranty/’ and follow the on-screen instructions to complete your return. Please
ensure that you include a proof of purchase with any returned product.
This guarantee only applies to genuine Tan.Easy Pro Tools purchased through
Tan.Easy Pro Tools approved stockists, and does not cover products repaired or
served by anyone other than a Tan.Easy Pro Tools personnel and Tan.Easy Pro
Tools representatives. Note that this guarantee may be invalidated were serial
numbers or identication have been erased, damaged or modied. This does
not aect your statutory rights.
The guarantee does not include;
1. Damage caused by misuse, improper treatment or violent usage.
2. Damage caused by failure to comply with these instructions for use.
3. Damage caused by connecting this appliance to the incorrect voltage
4. Damage caused by connecting accessories supplied by other manufacturers.
5. Minor faults, which do not signicantly aect the value of the device or its
eective use.
Australia Only.
Our goods come with guarantees that cannot be excluded under the Australia
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the good fail to be of
acceptable quality and the failure does not amount to a major failure.
PRECAUTION
IF YOUR SKIN IS VERY SENSITIVE IT IS ADVISABLE TO CONDUCT A PATCH TEST A
MINIMUM OF 12 HOURS PRIOR TO THE APPLICATION OF THE TAN.
IMPORTANT
WASH MINI COMPRESSOR FILTER WITH
WATER AT LEAST EVERY 6 MONTHS
HANDY TIP
ANY SPRAY TAN SOLUTION WILL LAST LONGER IF
STORED IN THE REFRIGERATOR AFTER OPENING