Mini Gadgets BBSDVDCover User manual

1 Version 2.0
Bush Baby Stealth DVD Cover
Hidden Camera Manual
SKU: BBSDVDCover

2 Version 2.0
THANK YOU FOR PURCHASING THE BBSDVDCOVER
Please review this manual before using your
BBSDVDCover, and keep it handy.
Your purchase should include:
1 x BBSDVDCover
1 x Remote Control
1 x Removable Battery
1 x MicroUSB Cable
1 x AC Adapter
1 x 16GB MicroSD Card
1 x MicroSD Card Reader
1 x Instruction Booklet

3 Version 2.0
GET FAMILIAR WITH THE BBSDVDCOVER

4 Version 2.0

5 Version 2.0

6 Version 2.0
BEFORE YOU START
To preserve battery power, your device will come with
the battery connector disconnected. Before
attempting to use the device, be sure to connect the
battery’s connector to the circuit board power lead.
Note: If you are not located in the US, or if you intend
to use this product anywhere other than the US, you
will need to purchase a converter in order to use the AC
wall plug in and avoid damaging the product. Because
different countries use different voltages in their
electrical wiring, you will need a converter that adapts
to the current in your particular country.
IMPORTANT WARRANY INFORMATION: If the
warranty sticker on your device has been removed or
tampered with, your lifetime warranty will be voided.
You may be charged fees or denied a return should this
happen.
OPERATING THE BUSH BABY STEALTH DVD COVER

7 Version 2.0
IMPORTANT NOTICE: Allow the device to charge 6 –8
hours before using.
REMOVING AND CHARGING THE BATTERY
1. Remove battery from the inside of the DVD
cover.
2. Disconnect the battery connector that is
connecting the battery to the circuit board (the
red plastic piece connected to red and black
wires). Note: be careful not to pull on the wires
as that could damage them –pull gently on the
plastic pieces instead.
3. Connect the connector on the battery to the
connector on the charging adapter (see page
5).
4. Plug the provided USB cable into the other end
of the charging adapter.
5. Plug the other end of the USB cable into the
wall AC adapter and plug it into the wall.
6. Wait 6 to 8 hours.

8 Version 2.0
a. The larger the battery capacity, the
longer it takes to charge.
HOW TO TURN ON THE CAMERA
1. Press the Power Button on the remote control
one time (see page 4). The device will
automatically be in standby mode.
HOW TO RECORD CONTINUOUS VIDEO (720P)
1. When the camera is in Standby Mode, press the
“B” button once quickly (see page 4). The unit
will vibrate twice.
2. Once the device quits vibrating, the camera will
start recording video.
3. To stop the recording, press the B button again,
and wait three seconds. The device will
automatically be back in standby mode.
HOW TO RECORD CONTINUOUS VIDEO (1080P)
1. While the camera is in standby mode, hold the
“C” button for 3 seconds.

9 Version 2.0
2. The unit will vibrate three times. The camera is
now recording 1080P video.
3. To save video and return to standby mode,
quickly press the “C”button, and wait three
seconds.
HOW TO RECORD MOTION DETECTION
1. In Standby mode, press the “D” button one
time (see page 4). The unit will vibrate three
times.
2. The unit is now in motion detection mode and
will begin recording video once motion is
detected. Note: there will be no indication
when the device detects motion –it will simply
start recording.
3. To return to standby mode and stop motion
detection, press the “D” button again. The unit
will vibrate.
HOW TO TAKE PICTURES

10 Version 2.0
1. When the camera is in Standby Mode, press the
“C” button (see page 4). The unit will vibrate,
and then take a picture. It then returns to
standby mode.
MICROSD CARD SLOT
To access the MicroSD Card Slot, you must open the
DVD case.
1. Gently push the MicroSD Card into the slot. The
gold contacts on the card will be inserted first,
and they should face the main circuit board.
You will feel some spring resistance before the
card clicks in to place.
2. Never force the card into the Card Slot under
any circumstances. Otherwise, the DVD cover
unit or the MicroSD card itself will be damaged.
3. To remove the SD card, gently push the card in
so that it clicks.
4. The internal spring tension will eject the card.