Mini Gadgets DIYNV User manual

1 Version 1.0
Bush Baby Do-It-
Yourself Night Vision
IR Box
SKU: DIYNV

2 Version 1.0
THANK YOU FOR PURCHASING THE DIYNV
Please read this manual before operating the
DIYNV and keep it handy.
Your purchase should include:
1 x DIYNV
1 x Battery Charger
8 x Rechargeable AA Batteries
1 x Manual

3 Version 1.0
GET FAMILIAR WITH YOUR DIYNV

4 Version 1.0

5 Version 1.0
OPERATING THE DIYNV
BEFORE YOU START
IMPORTANT: Please fully charge the included
batteries with the included battery charger
prior to use. The light will turn from red to
green when done charging.
1. This device is meant to be used with a
camera in order to give the camera
night vision capabilities. It is not a
camera in itself nor does it need to
‘hook up’ to cameras.
2. This device is only compatible with our
Bush Baby 4K Wi-Fi and Bush Baby Night
Eye lines of cameras.
3. IMPORTANT: This unit’s acrylic can get
hot, so please use caution when
handling. To avoid heat, please do not
touch the acrylic while the unit is
powered or for up to 2 hours after.

6 Version 1.0
IMPORTANT WARRANY INFORMATION: If the
warranty sticker on your device has been
removed or tampered with, your lifetime
warranty will be voided. You may be charged
fees or denied a return should this happen.
CHARGING YOUR DEVICE
Note: You will need a small Philips’ head
screwdriver in order to access the batteries.
1. Use your screwdriver to carefully
unscrew the screws on the back (see
page 4).
2. Gently remove the battery case from
inside the box.
3. Pay special attention to make sure the
positive (+) and negative (-) ends align
how they are shown in the battery case.
OPERATING YOUR DEVICE
1. Place the box front-facing towards the
area you need to have night vision.

7 Version 1.0
a. Note: Think of the box as a
flashlight, and you need to
“light” the subject you want to
capture.
2. This device will turn on automatically
when it senses the lights going off.
3. To make sure the device is working, look
through your phone’s camera at the
unit in the dark. You should see the IRs
inside illuminated.
a. NOTE: For iOS devices, you must
use the front-facing camera.
TROUBLESHOOTING
DEVICE WON’T CHARGE
Make sure the positive and negative
ends of the batteries are facing correctly
in the charger.

8 Version 1.0
Make sure the charger is securely
plugged in to a functioning electrical
outlet.
VIDEO IS DARK
Make sure the IRs are on by turning off
the lights in the room, pointing your
phone’s camera towards the box’s front,
and seeing if the lights inside are
reflecting.
Move the box closer to the place you
need lighted.
VIDEO IS LIGHTENED BUT NOT ENOUGH
Move the box closer to the subject you
are trying to capture.
Make sure all the LEDs inside are
illuminated by performing the actions
above.
OTHER PROBLEMS

9 Version 1.0
Contact our Technical Support team at
770-694-6921 or
[email protected]
SPECIFICATIONS
Number of IR LEDs
48
Night Vision Range
~20FT
Power Source
8x AA Batteries
(rechargeable)
Lux Rating
0
Night Vision
Activation
Automatic Photocell
Sensor

10 Version 1.0

11 Version 1.0

12 Version 1.0
QUALITY CONTROL CHECKLIST
☐Instruction Manual
☐Battery Charger
☐Rechargeable AA Batteries (8x)
☐DIYNV
QC Technician:
______________________________
Date:
___________________________________