minrray UV520-ST User manual

FULL HD PTZ CAMERA
User Manual
（V1.0）

Attentions
This manual introduces functions, installations and operations for this PTZ camera in details. Please read this
manual carefully before installation and use.
1. Cautions
1.1 Avoid damage to product caused by heavy pressure, strong vibration or immersion during transportation, storage and
installation.
1.2 Housing of this product is made of organic materials. Do not expose it to any liquid, gas or solids which may corrode
the shell.
1.3 Do not expose the product to rain or moisture.
1.4 To prevent the risk of electric shock, do not open the case. Installation and maintenance should only be carried out by
qualified technicians.
1.5 Do not use the product beyond the specified temperature, humidity or power supply specifications.
1.6 Wipe it with a soft, dry cloth when cleaning the camera lens. Wipe it gently with a mild detergent if needed. Do not use
strong or corrosive detergents to avoid scratching the lens and affecting the image.
1.7 This product contains no parts which can be maintained by users themselves. Any damage caused by dismantling the
product by user without permission is not covered by warranty.
2. Electrical Safety
Installation and use of this product must strictly comply with local electrical safety standards.
The power supply of the product is ±12V, the max electrical current is 2A.
3. Install
3.1 Do not rotate the camera head violently, otherwise it may cause mechanical failure.
3.2 This product should be placed on a stable desktop or other horizontal surface. Do not install the product obliquely,
otherwise it may display inclined image;
3.3 Ensure there are no obstacles within rotation range of the holder.
3.4 Do not power on before completely installation.
4. Magnetic Interference
Electromagnetic fields at specific frequencies may affect the video image. This product is Class A. It may cause radio
interference in household application. Appropriate measure is required.

Content
1. Camera Installation.................................................................................................................................................................. 4
1.1 Camera Interfaces.............................................................................................................................................................. 4
1.2 Mounting Brackets.............................................................................................................................................................4
2. Product Overview.....................................................................................................................................................................7
2.1 Product Introduction.......................................................................................................................................................... 7
2.1.1 Model.......................................................................................................................................................................... 7
2.1.2 Dimension................................................................................................................................................................... 7
2.1.3 Accessory.................................................................................................................................................................... 8
2.2 Main Features.....................................................................................................................................................................9
2.3 Technical Parameter...........................................................................................................................................................9
2.4 Interfaces Instruction....................................................................................................................................................... 12
2.4.1 External Interface......................................................................................................................................................12
2.4.2 Rotary DIP Switch.................................................................................................................................................... 12
2.4.3 RS-232 Interface....................................................................................................................................................... 13
3. Application Instruction...........................................................................................................................................................14
3.1 Video Output.................................................................................................................................................................... 14
3.1.1 Power-on Initial Configuration.................................................................................................................................14
3.1.2 Video Output............................................................................................................................................................. 15
3.2 Remote Control................................................................................................................................................................ 15
3.2.1 Match Code for Wireless Remote Control................................................................................................................15
3.2.2 Keys Introduction for IR Remote Control................................................................................................................ 16
3.3 Menu Introduction............................................................................................................................................................19
3.3.1 Main Menu................................................................................................................................................................19
3.3.2 System Setting...........................................................................................................................................................20
3.3.3 Camera Setting..........................................................................................................................................................21
3.3.4 P/T/Z......................................................................................................................................................................... 24
3.3.5 Video Format.............................................................................................................................................................24
3.3.6 Version.......................................................................................................................................................................25
3.3.7 Restore Default......................................................................................................................................................... 25
4. Network Connection.............................................................................................................................................................. 26
4.1 Connecting Mode.............................................................................................................................................................26
4.2 IE Login........................................................................................................................................................................... 27
4.2.1 Web Client.................................................................................................................................................................27
4.2.2 Preview......................................................................................................................................................................28
4.2.3 Playback.................................................................................................................................................................... 28
4.2.4 Configuration............................................................................................................................................................ 28
4.2.5 Video Configuration..................................................................................................................................................29
4.2.6 Network Configuration............................................................................................................................................. 32
4.2.7 System Configuration............................................................................................................................................... 33
4.2.8 Logout....................................................................................................................................................................... 34

4.2.9 Wireless Network......................................................................................................................................................34
5. Serial Port Communication and Control................................................................................................................................35
5.1 VISCA Protocol List........................................................................................................................................................ 35
5.1.1 VISCA Protocol Return Command...........................................................................................................................35
5.1.2 VISCA Protocol Control Command......................................................................................................................... 35
5.1.3 VISCA Protocol Inquiry Command..........................................................................................................................38
5.2 Pelco-D Protocol Command List.....................................................................................................................................40
5.3 Pelco-P Protocol Command List......................................................................................................................................40
6. Maintenance and Troubleshooting.........................................................................................................................................41
6.1 Camera Maintenance........................................................................................................................................................41
6.2 Troubleshooting............................................................................................................................................................... 41
7. Copyright Statement.............................................................................................................................................................. 43

1. Camera Installation
1.1 Camera Interfaces
Figure 1.1 Product Interfaces
1. Camera Lens
7. Rotary DIP Switch
13. HDMI Output Interface
2.Remote Control Receiving
Indicator
8. RS485 Input (left +, right-)
14.USB2.0 Interface (U-disk memory)
3.Tripod Screw Hole
9. RS422 Input
15. LAN Port
4.Screw Hole for Tripod
10. Audio Input Interface (Line-in)
16. DC12V Input Power Supply
Socket
5. RS232 Control Interface
（Input）
11. CVBS Output Interface
17. Power Switch
6. RS232 Control Interface
（Output）
12. SDI Interface
1.2 Mounting Brackets
Notes:
Ceiling or wall mounting brackets can only be mounted on template and concrete wall.
For safety reason, plasterboard is not recommended.
1) Wall Mounting

2) Ceiling Mounting

2. Product Overview
2.1 Product Introduction
2.1.1 Model
Model X — XXX — XXX — XX
IR---IR Remote Controller
WR---Wireless Remote Controller
ST---Standard Interface（WIFI optional）
05---05X Optical Zoom Lens
10---10X Optical Zoom Lens
12---12X Optical Zoom Lens
20---20X Optical Zoom Lens
30---30X Optical Zoom Lens
S---1080P60 Downward Compatibility
M---1080P30 Downward Compatibility
Figure 2.1 Product Model
2.1.2 Dimension

Figure 2.2 Product Dimension
2.1.3 Accessory
Please check below standard and optional accessories when unpacking the box.
Standard Accessory
Optional Accessory
Power adapter
Wireless Remote Control
IR Remote Control
Wall Mount
RS232 Cable
Ceiling Mount
User Manual
USB3.0 Cable
3.5MM to RCA Cable

2.2 Main Features
This series camera has perfect functions, superior performance and rich video output interfaces; Featuring with advanced
ISP processing algorithms, offering vivid and high resolution video with a strong sense of depth and fantastic color
rendition. It supports H.264/H.265 encoding which makes motion video more fluent and clear under low bandwidth
conditions.
Full HD Resolution: 1/2.8 inch high quality CMOS sensor. Resolution is up to 1920x1080 with frame rate up to
60fps.
Multiple Optical Zoom Lens: 5X/10X/12X/20X/30X optical zoom lens. The 5X zoom camera is with 83.7° FOV
without distortion.
Leading Auto Focus Technology: Fast, accurate and stable auto focusing technology.
Low Noise and High SNR: Super high SNR image is achieved with low noise CMOS. Advanced 2D/3D noise
reduction technology further reduces the noise while ensuring high image clarity.
Multiple Video Output Interfaces: HDMI, SDI, CVBS, LAN, WiFi (optional)
Multiple Video Compression Standards: Support H.264/H.265 video compression.
Audio Input Interface: Support AAC, MP3 and G.711A audio compression, 16000, 32000, 44100, 48000 sampling
frequency.
Video / Audio Record and Store: USB2.0 interface supports U disk storage (U disk storage only supports FAT32
format), real-time record and store.
Multiple Network Protocol: Support ONVIF, GB/T28181, RTSP, RTMP protocols; Support RTMP push mode, easy
to be connected to streaming server (Wowza, FMS); Support RTP multicast mode; Support network full command
VISCA control protocol.
Control Interface: RS485/RS422,RS232-IN, RS2323-OUT, RS232 (cascade connection)
Multiple Control Protocol: Support VISCA, PELCO-D, PELCO-P protocols; Support automatic identification
protocols.
Auto sleep function: Auto sleep/wake up function with low power consumption, less than 400mw.
Quiet Pan / Tilt Movement: With high accuracy step driving motor, camera can pan / tilt extremely quiet and smooth.
IR / Wireless Remote Control: Users can choose IR remote control or wireless remote control according to different
conditions. 2.4G wireless remote control is not affected by the angle, distance or infrared interference. Far-end-control
is also available.
Multiple Presets: Up to 255 presets (10 presets via remote control).
Multiple Application: Online-education, Lecture Capture, Webcasting, Video conferencing, Tele-medicine, Unified
Communication, Emergency command and control systems, etc.
2.3 Technical Parameter
Model
Camera Parameter
Sensor
1/2.8 inch high quality HD CMOS sensor
Effective Pixels
16: 9, 2.07 megapixel
Video Format
HDMI/SDI Output: 1080P60/50/30/25/59.94; 1080I60/50/59.94;
720P60/50/30/25/59.94
CVBS Output: 576i 480i
Optical Zoom
5X
f=3.1～15.5mm
10X
f=4.7～47mm
12X
f=3.9～46.8mm
20X
f=5.5～110mm
30X
f=4.3～129mm
View Angle
20°（T）
83.7°（W）
6.43°（T）60.9°
（W）
6.3°（T）
72.5°（W）
3.3°（T）
54.7°（W）
2.34°(T)
65.1°(W)

AV
F1.8 – F2.8
F1.6 – F3.0
F1.8 – F2.4
F1.6 – F3.5
F1.6 ～F4.7
Digital Zoom
10 X
Minimum
Illumination
0.5Lux(F1.8, AGC ON)
DNR
2D﹠3D DNR
White Balance
Auto / Manual/ One Push/ Specify color temperature
Focus
Auto/Manual/One Push Focus
Aperture
Auto/Manual
Electronic Shutter
Auto/Manual
BLC
ON/OFF
WDR
OFF/ Dynamic level adjustment
Video Adjustment
Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve
SNR
>55dB
Input/Output Interface
Video Interfaces
HDMI, SDI, LAN(POE), WiFi(optional), CVBS, RS232-IN/OUT, RS485, A-IN,
USB2.0((U disk storage)
Video Output
HDMI, SDI, LAN, WiFi(optional), CVBS
Video Stream
Dual stream output
Multi-code source
output
Support multi-code source output (SDI/HDMI/LAN can be different code sources)
Video Compression
Format
H.265, H.264
Audio Input Interface
A-IN: Double track 3.5mm linear input
Audio Output
Interface
HDMI, SDI, WiFi, LAN
Audio Compression
Format
AAC,MP3, G,711A
Control Interface
100M IP Port（10/100BASE-TX）
Control Protocol
RTSP, RTMP, ONVIF, GB/T28181; Network VISCA control protocol;
Support remote upgrade, reboot and reset
Control Interface
RS232（IN/OUT）,RS485, RS422
Control Protocol
VISCA/Pelco-D/Pelco-P; Baud Rate:115200/38400/9600/4800/2400
Power Interface
HEC3800 outlet(DC12V)
Power Adapter
Input AC110V-AC220V Output DC12V/1.5A
Input Voltage
DC12V±10%
Input Current
Maximum: 1A
Power Consumption
Maximum: 12W
PTZ Parameter
Pan Rotation
-170°～+170°
Tilt Rotation
-30°～+30°
Pan Control Speed
0.1 ～60°/sec
Tilt Control Speed
0.1～30°/sec
Preset Speed
Pan: 60°/sec, Tilt: 30°/sec
Preset Number
255 presets (10 presets via remote control)

Other Parameter
Stored Temperature
-10℃～+60℃
Stored Humidity
20%～95%
Working Temperature
-10℃～+50℃
Working Humidity
20%～80%
Dimension
140mm×155mm×173mm
Weight
1.14kg
Application
Indoor
Accessory
Package
Power Supply, RS232 Control Cable, 3.5MM to RCA Cable, IR Remote Control, User
Manual, Warranty Card
Optional Accessories
Ceiling / Wall Mount (Extra Cost)

2.4 Interfaces Instruction
2.4.1 External Interface
Figure 2.3 Wiring Diagram
2.4.2 Rotary DIP Switch
Video Format
Dial-up
video
format
Dial-up
video format
0
1080P60
8
720P30
1
1080P50
9
720P25
2
1080I60
A
1080P59.94
3
1080I50
B
1080I59.94
4
720P60
C
720P59.94
5
720P50
D
480i
6
1080P30
E
576i
7
1080P25
F
video format to
be set on the
menu

Note: 1. After switching the system and dialing, you need to restart the camera to take effect;
2. Only when the rotary dial code is F, the video format item is displayed in the menu;
3. The rotary dial code is 0-E, and the video format is subject to the rotary dial code.
2.4.3 RS-232 Interface
1）ST model RS-232C interface specification as shown below
Connection to PC or Camera Controller
Camera
WindowsDB-9
1.DTR
1.DCD
2.DSR
2.RXD
3.TXD
3.TXD
4.GND
4.DTR
5.RXD
5.GND
6.GND
6.DSR
7.IR OUT
7.RTS
8.NC
8.CTS
9.RI
2）RS-232 Mini-DIN 8-pin Port Definition
NO.
Port
Definition
1
DTR
Data Terminal Ready
2
DSR
Data Set Ready
3
TXD
Transmit Data
4
GND
Signal Ground
5
RXD
Receive Data
6
GND
Signal Ground
7
IR OUT
IR Commander Signal IR
8
NC
No Connection

3）RS232(DB9)Port Definition
4) VISCA networking as shown below:
Camera cascade connection
Camera 1
Camera 2
1.DTR
1.DTR
2.DSR
2.DSR
3.TXD
3.TXD
4.GND
4.GND
5.RXD
5.RXD
6.GND
6.GND
7.IR OUT
7.OPEN
8. NC
8.OPEN
Note: ST model has RS232 input and output interface, so you can cascade as the above way.
3. Application Instruction
3.1 Video Output
3.1.1 Power-on Initial Configuration
1) Power-on: Connect DC12V power supply adapter with power supply socket
2) Initial Configuration: The remote control receiving indicator flashes after power on, the pan-tilt turns left to
the lowest left to the lowest, and then turns to the HOME position (both the horizontal and vertical positions are
in the middle), while the movement first shrinks and then stretches. When remote control receiving indicator
stops flashing, the self-checking is completed.
(If you forget the user name, password or IP address, the remote control key combination [*] [#] [manual]; IP,
user name and password to restore the default value.)
NO.
Port
Definition
1
DCD
Data Carrier Detect
2
RXD
Receive Data
3
TXD
Transmit Data
4
DTR
Data Terminal Ready
5
GND
System Ground
6
DSR
Data Set Ready
7
RTS
Request to Send
8
CTS
Clear to Send
9
RI
Ring Indicator

Notes:
1) After power on and self-checking, the camera will automatically return to the preset 0 position if it’s pre-set.
2) The default address for the IR remote control is 1#. If the menu restored to factory defaults, the remote
control default address will restore to 1#.
3.1.2 Video Output
1) Network output
a. Network cable connection: as shown in Figure 1.1 label 15.
b. Webpage Login: open your browser and enter 192.168.5.163 (factory default) in the address bar; press
Enter to enter into the login page, click on the “player is not installed, please download and install !" and
follow the installation steps for installation. Then enter the user name admin and password admin (factory
default); press Enter to enter into the preview page, users can carry out PTZ control, video recording,
playback, configuration and other operations.
2) HDMI Video Output
a. HDMI video cable connection: as shown in Figure1.1 label 13.
b. Connect the camera and the monitor via HDMI video cable, and the video output is available after the
camera self-test.
3) SDI Video Output
a. SDI video cable connection: as shown in Figure1.1 label 12.
b. Connect the camera and the monitor via SDI video cable, and the video output is available after the
camera self-test.
4) CVBS Video Output
a. CVBS video cable connection
b. Connect the camera and the monitor via CVBS video cable, turn the dial to D or E, power off and restart,
and the video output is available after the camera self-test.
3.2 Remote Control
3.2.1 Match Code for Wireless Remote Control

One to One Code Matching:
Press the "set" and "*" keys combined for 3 seconds, LED indicator starts flashing.
Camera receive the signal and power on, LED indicator will go off if code matching
successfully. The camera can be controlled by this wireless remote control only after one
to one code pairing. Otherwise please clear the code matching of this remote control, or
use other remote control to pair with the camera again.
If one to one code matching failed, the red LED light flashes for 20 seconds and then goes
off, camera will stop code match and turn on sleep mode; Press any key to wake up the
camera and re-match code.
Note: After code matching successfully, please select the camera address to control it.
Clear Code:
Press the "set" and "#" keys combined for 3 seconds, LED indicator starts flashing.
Camera will power off and on, the LED indicator will go off if clear code successfully.
Sleep Mode and Wake Up:
Press any key to wake up the camera from sleep mode.
3.2.2 Keys Introduction for IR Remote Control
1) In this manual, “press the key” means a click rather than a long-press, and a special note will be given if a
long-press for more than one second is required.
2) When a key-combination is required, do it in sequence. For example,“ 【*】+【#】+【F1 】”means
press“【*】”first and then press“【#】” and last press“【F1】”.
1. Standby Key
The camera enters standby mode if long press 3s on standby key;
Long press 3s again on the standby key, the camera will self-check again and return to HOME position (If
preset 0 position is set, the camera will return to preset 0 position).
2.Camera Selection
Select the camera address to control.
3. Focus Control

Auto: auto focus mode
Manual: manual focus mode
Focus + (near):Press【FOCUS +】key (Valid only in
manual focus mode)
Focus - (far): Press【FOCUS -】key (Valid only in
manual focus mode)
Press and hold the keys, the action of focus will keep
continue and stop as soon as the key is released.
4. Zoom Control
ZOOM +: Press【ZOOM +】key to zoom in
ZOOM - : Press 【ZOOM -】key to zoom out
Press and hold the keys, the action of focus will keep
continue and stop as soon as the key is released.
5. Set and Clear Presets
Set Preset: Press 【SET PRESET】button, and then
press the number key 0-9 to set preset positions.
Note: 10 presets via remote control.
Call Preset: Press a number key 0-9 directly to call a
preset position.
Clear Preset: Press 【CLEAR PRESET】button, and
then press the number key 0-9 to clear preset positions.
Note : Press the【#】key three times continually to
clear all presets.
6. Pan/Tilt Control

Up: press Down: press
Left: press Right: press
Back to middle position: press“【HOME】”
Press and hold the up/down/left/right key, the pan/tilt
movements will keep running, from slow to fast, until it
runs to the endpoint; stop as soon as the key is released.
7. Menu Setting
【MENU】: Open / close the OSD menu
【HOME】:Camera lens back to the middle position;
Confirm button; Enter next menu
【↑】【↓】：Choose item
【←】【→】：Modify values
【BLC ON/OFF】：Turn on or off the back light
compensation
8. Camera Remote Control Address Setting
【*】+【＃】+【F1】:Camera Address No.1
【*】+【＃】+【F2】:Camera Address No. 2
【*】+【＃】+【F3】:Camera Address No. 3
【*】+【＃】+【F4】:Camera Address No. 4

9. Key Combination
1) 【#】+【#】+【#】: Clear all presets
2) 【*】+【#】+【6】: Restore factory defaults
3) 【*】+【#】+【3】: Menu set to Chinese
4) 【*】+【#】+【4】: Menu set to English
5) 【*】+【#】+【9】: Flip switch
6) 【*】+【#】+Auto: Enter aging mode
7) 【#】+【*】+Auto: Exit aging mode
8) 【*】+【#】+Manual: Restore the default user name,
password, and IP address
9) 【#】+【#】+【0】: Switch the video format to 1080P60
10)【#】+【#】+【1】: Switch the video format to 1080P50
11)【#】+【#】+【2】: Switch the video format to 1080I60
12)【#】+【#】+【3】:Switch the video format to 1080I50
13)【#】+【#】+【4】: Switch the video format to 720P60
14)【#】+【#】+【5】:Switch the video format to 720P50
15)【#】+【#】+【6】: Switch the video format to 1080P30
16)【#】+【#】+【7】: Switch the video format to 1080P25
17)【#】+【#】+【8】: Switch the video format to 720P30
18)【#】+【#】+【9】:Switch the video format to 720P25
3.3 Menu Introduction
3.3.1 Main Menu
In normal working mode, press 【MENU】key to display the menu, using scroll arrow to point at or highlight
the selected items.