to the bottom; finally both horizontal and vertical turn to the middle position. The motor stops running, and
initialization is completed. (Note: If the power-on mode is opened and saved preset position 0 or 1, then the
pan/tilt will be set to 0 or 1 preset position)
10. Factory Default : entry OSD menu by pressing the menu key of remote controller, 【MENU】->
【RESET】->【ALL RESET】, moving the left/right key to select 【Yes】，then confirm by 【HOME】key as
the following form,
Camera Highlights
1.Chinese / English menu,convenient to use.
2. Provide high speed transmission USB3.0 interface, DVI-I interface(including the HDMI and YPbPr signal)
3. IR remote controller signal transparent transmission function: camera can receive both its own remote
controller signal and the one from terminal equipment, by transmitting the signal through VISCA IN to terminal
equipment IR receiver.
Camera Specifications:
1. video format : 1080P60/50/30/25 720P60/50/30/25
2. Video Output Interface : USB3.0, DVI-I(including the HDMI and YPbPr signal)
3. Image Sensor : 1/2.8 inch 2 Megapixels high quality HD CMOS Sensor
4. Lens:3.92mm ~ 47.3 mm，F1.8 - 2.8, angle of view: 72.5°- 6.3°.
5. Rotation: ±170°for pan rotation, and -30°~+90°for tilt rotation, support up-side down installation.
6. Speed: 0.1°-180°/sec for pan rotation, 0.1°-80°/sec for tilt rotation.
7. Presets : 10 preset positions (can reach to128 presets by serial command), precision error less than 0.2°.
8. Support auto/ manual white balance/indoors/ out doors/ controller auto/ auto-track white balance ,
auto/manual exposure (iris , shuttle ) , auto/manual/One Push focus
9. support WDR function: with performance ≥100dB,
10. Control Signal interface : 8 pins mini DIN, RS232，VISCA/Pelco-D/Pelco-P protocol
11. Power interface : HEC3800 power jack , Power supply adapter: 12VDC/2A
12. Max power consumption: 12W
13. working temperature: -5 to +45
14. Storage temperature:-20 to +60
15. Weight: 1.3KG
