Mio DigiWalker C320 User manual

1
English
When MioMap is started, the Main
menu screen appears. From here you
can reach all parts of MioMap using the
buttons described below.
zTap to specify an address as your destination (Page 2).
zTo select one of the stored Points of Interest, tap (Page 4).
zTap for a list of recent destinations.
zFor one of your favorite destinations, tap .
zTap to see the map screen (Page 7).
zTo customize the way MioMap works, tap (Page 8).
zTap to stop navigation and exit MioMap.
The Main menu

2
English
From the Main menu tap to specify an address as your destination.
If your destination is not located in the state/province you are currently in, first
tap in order to specify another state/province.
To change to another country (if available with your device), tap then
select a country from the list displayed.
Now from the list of states/provinces choose the state/province for your
address. Use the to scroll through the state/province list. Tap on the
state/province name to select.
After selecting the state/province, you can enter the name of the city. A list of
cities will be displayed. Tapping leads you to a new screen with a
full list of matching cities. Tap on your city to select.
To find an address

3
English
After selecting the city, start entering the name of the street. Once the matching
street names fit on one page, the list of results will be displayed automatically.
zTap any time to see a full list of matching streets immediately.
zIf the destination is the center of the city, tap .
From the list of matching streets:
zTap any of the list items to select the street.
zUse the buttons to see additional results.
The house number screen will be displayed with the range of numbers
displayed.
zTap to select one of the cross streets, or
zUse the keypad to enter the house number, and tap
when finished.
Once you have completed setting the destination address, you will be taken to
the Map screen. Tap and the route will be immediately planned. You can
start driving right away.
To find an address

4
English
POIs are businesses, landmarks and public places and buildings.
To find a POI, tap the Menu button to open the Find menu. Tap POI to open a
list of POI groups.
From this list you can:
zTo find POIs around a different location, tap .
zTap to search by name.
zFor a complete list of POIs by proximity, tap .
zUse the buttons to see additional POI groups.
zTap any of the POI groups to open a list of their subgroups.
To find a POI

5
English
After you get a list of POIs:
zTap to narrow the list by entering a part of the POI name.
zTo see the name and address of additional POIs, tap .
zWhen you select a POI from the list, a new View POI window opens with
the details of the selected POI.
From the View POI window you can:
zTap in the top left corner to return to the list and select another
POI, or
zTo complete your search and return to the Map screen with the selected
POI highlighted on the map, tap .
To find a POI

6
English
Whenever you select a point on the map, the Cursor menu appears at the
bottom of the screen:
zTap to replace the previous destination with this point.
zTo insert it as an intermediary destination (Via), tap .
zTap to append it to the end of the route.
zTo save this point as a location of a road safety camera, tap .
zTap to save this point as a new POI, with a custom new name or
icon, as desired.
Using the selected map point

7
English
MioMap has a map screen for both map browsing and navigation. Browse the
full screen map, or open a data panel on the right with the button in the
top right corner. To close the data panel, tap the button.
With the data panel open, you will find four buttons at the bottom that serve as
hot keys for the following functions:
zTap to see time, speed, distance and other route information.
zTap to see the list of POIs around the current position directly.
zTap to see the list of TMC events, if the feature is enabled.
zTap to see the route itinerary with a list of the maneuvers.
The map looks like a conventional road-map. The Green arrow represents
your current position, and the Orange line shows the recommended route.
Tap the satellite dish icon to open the GPS Data screen.
If you have moved the map or changed the view, a Follow button appears. Tap
this button to jump to the current GPS position and re-enable Smart Zoom.
The Map screen

8
English
The Settings screen lets you fine-tune the way MioMap works. From the Main
menu, tap to open the Settings menu.
Tap to set the General parameters; for keypad tones and
voice guidance; for route calculation settings; to set the
language and select measurement units; or to adjust advanced
settings such as display backlight or map colors.
You will find similar controls on all settings screens:
zTap Switches to turn features on and off ,
zMove the handles of Sliders to adjust numeric values, or
zTap List selectors to change their values.
Settings

9
Français
Lorsque MioMap est lancé, l’écran du
Menu Principal apparaît. Dans cet écran,
vous pouvez utiliser toutes les fonctions
de MioMap décrites ci-dessous avec les
boutons.
zDans le Menu Principal, pressez sur pour entrer l'adresse de la
destination désirée (Page 10).
zPour sélectionner l’un des POI (Point d’intérêt) préenregistrés, pressez sur
(Page 12).
zPressez sur pour une liste des destinations utilisées récemment.
zPour choisir l’une de vos destination préférées, pressez sur .
zPressez sur pour aller à l’écran Carte (Page 15).
zPour personnaliser le fonctionnement de MioMap, pressez sur
(Page 16).
zPressez sur pour arrêter la navigation et quitter MioMap.
Le Menu Principal

10
Français
Dans le Menu Principal, pressez sur pour entrer l'adresse de la
destination désirée.
Si la destination désirée n’est pas dans la même région/le même état où vous
vous trouvez actuellement, pressez en premier sur pour changer la
région/l’état.
Pour changer le pays (si votre appareil est équipé de cette fonctionnalité),
pressez sur puis sélectionnez un pays dans la liste affichée.
Choisissez maintenant la région/l’état dans la liste des régions/états pour
l’adresse désirée. Utilisez les boutons pour naviguer la liste des
régions/états. Pressez ensuite sur le nom de la région/de l’état désiré pour le
sélectionner.
Après avoir sélectionné une région/un état, vous pouvez choisir le nom de la
ville désirée. Une liste des villes disponibles s'affiche. Pressez sur
pour aller à un nouvel écran avec une liste de toutes les villes disponibles.
Pressez sur la ville de votre choix.
Pour trouver une adresse