MiraMate Mini Magic User manual

Mini Magic Instructions
Your parcel contains one wrist band (big) and two boxes: one small and the
other one larger:
The small box contains a 5V power adapter, USB power cable, and wrist
band (small).
The larger box has two layers. On the top is the main unit. Under this is a

pair of single coils, velvet bag, coil tester, and Velcro strap.
There are three options to supply power to Mini Magic: 9v Battery, portable
power supply, or mains power (using the 5v power adapter). The first two
options grant you freedom to move during treatments.
1. If you choose to use a 9V battery, we suggest you use a lithium battery.
The battery compartment is accessed by gently pressing this tab:

The lid can then be gently lifted off.
The battery is inserted into the battery compartment as shown in this photo.
It is important to have the battery orientated correctly, with the positive
terminal on the right-hand side:

Position the lid so the top is held by a tab on the main unit, and gently click
the lid shut. Do not use excessive force.

2. The USB Power Cable can be connected to a portable power supply. This
provides longer treatment durations.

3. The same USB Power Cable can also be used with the 5V power adapter.
You can choose the power option that best suits your needs.
Tips: When you use the portable power supply or mains power, please take
the battery out. If you leave the battery inside, it will take power from the
battery first.

The next step is to plug the coil into Mini Magic. Make sure the coil plug is
fully inserted into the socket.

You can set the desired power level using the 3-position rotary switch. Level
three is the one we recommend. If you are sensitive, you can select a lower
power level.

Turn on Mini Magic using the switch located on the right.