Mircom MS-700ID SERIES User manual

ALPHAINTELLIGENTADDRESSABLE MANUAL STATIONS MS-700ID SERIES
Description
Mircom’s MS-700ID Series Intelligent Fire Alarm
Manual Stations are made of a high quality, die-cast
metal andareavailableineithersingleordualaction
configurationswithoneor two permanently attached
addressable modules.
The addressable manual station has DIP switches
which allow for address setting. Pulling the handle
initiates the operation of the addressable module.
AllmodelsareavailablewithCAT-30 keysand mount
on a standard single gang backbox, Mircom model
BB-700interior surface metalbackbox,orBB-700WP
weather proof backbox.
Operation
The MS-700ID Series is operated by pulling the
handle on the front of the station. The unit is reset by
openingthestationwiththekey,placingthehandlein
the normal upright position and relocking the station.
Onthedualactionmodels,thepushbarrotatesinward
allowing the Manual handle to be grasped in a one
handed motion.
Features
Single or Dual Action•
Key resettable•
Permanently Attached Intelligent Addressable• Module
High-gloss red enamel finish•
Plastic breakrod•
Mounts on standard single gang box, Mircom’s• BB-700 surface metal backbox or BB-700WP
weather proof backbox
Available in English and Bilingual versions•
Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specifications and models and also to discontinue models.
Specifications
The manual station shall be Mircom’s MS-700ID
Series. Operating instructions shall be in raised
English or English and French lettering and the
unit shall be constructed of high quality die-cast
metal and finished in red enamel paint to provide
quick identification. Pulling the handle shall initiate
immediate operation of the intelligent addressable
module. In addition, those stations installed in a two
stage system shall come equipped with an internal
key switch designed to operate the 2nd stage alarm
initiating circuit.
All manual fire alarm stations shall be installed to
complywith the CanadianElectricalCode(CSA22.1)
and CAN/ULC-S524-01 Standard for Installation of
Fire Alarm Systems. Final acceptance is subject to
the local authority having jurisdiction.
5678
NOT TO BE USED FOR INSTALLATION PURPOSES.
MS-701UD
Intelligent Addressable
Single Action Manual Station
MS-710IDU
Intelligent Addressable
Dual Action Manual Station
S7005 S7005
CATALOG NUMBER

Canada
25 Interchange Way
Vaughan, Ontario L4K 5W3
Telephone: [phone]
Fax: [phone]
Web page: http://www.mircom.com Email: [email protected]
Distributed by:
Typical Wiring Diagram
Specifications
Switch Rating: 1 Amp @ 30 VDC
0.1 Amp @ 125 VAC
Manual Station Dimensions: 4.9” H x 3.5” W x 2.0” D
Color: Red with raised white letters, white Manual bar with raised black letters.
NOT TO BE USED FOR INSTALLATION PURPOSES.
U.S.A.
4575 Witmer Industrial Estates
Niagara Falls, NY 14305
Toll Free: [phone]
Fax Toll Free: [phone]
Surface Mount Backboxes
BB-700 Surface Mount
Backbox
Dimensions:
5” H x 3.6” W x 2.0” D
BB-700WP Weatherproof
Surface Mount Backbox
Dimensions:
5” H x 3.6” W x 2.2” D
WHI
SWITCH
N.O.
FROM PREVIOUS DEVICE
}
RED
BLK
TO NEXT DEVICE
PUR
ADDRESSABLE MODULE
~
BLK
RED
DIL SWITCH FOR ADDRESS SETTING
}
WHITE
- BLACK
+ RED
DIL SWITCH FOR ADDRESS SETTING
BLK
RED
WHI
PUR
KEY SWITCH
~
MS-701ID(U), MS-702ID(U) and MS-710ID(U)
Ordering Information
Model Description
MS-701ID Alpha Intelligent Addressable Key Resettable Single Action Single Stage Manual Station (Bilingual)
MS-702ID Alpha Intelligent Addressable Key Resettable Single Action Two Stage Manual Station (Bilingual)
MS-710ID Alpha Intelligent Addressable Key Resettable Dual Action Single Stage Manual Station (Bilingual)
Note: Add suffix “U” for English only models.
BB-700 Series 700 Interior Surface Mount Backbox, Red Finish
BB-700WP Series 700 Weatherproof Surface Mount Backbox, Red Finish
CAT. 5678
Rev. 2