Mircom TX3-TOUCH-UPS-KIT User manual

LT-6714 Rev 0 http://www.mircom.com Page 1 of 3
TX3-TOUCH-UPS-KIT Installation Instructions
A. Package contents
• APC Back-UPS uninterruptible power supply (model: BE 550G,
rating: 550VA 120V) including manufacturer’s documentation
and USB A male to USB B male cable (shown on right)
• 2 USB over Ethernet extender cables (shown on right). Use
with an Ethernet cable (not included) if more distance is
required. Maximum distances is 46 m (150 feet)
B. Connect the USB Cable
The USB connection between the uninterruptible power supply and the TX3 Touch (in
conjunction with the APC software) ensures that the TX3 Touch will shut down properly during
a power outage.
Note: Read the manufacturer’s documentation included with the
uninterruptible power supply.
1. Connect the USB port on the uninterruptible power supply to the USB port on the TX3
Touch.
If the USB A male to B male cable is too short, use an Ethernet cable (not included) and
the included USB over Ethernet extender cables as shown below. The maximum
distance is 46 m (150 feet).
2. Go to page 2.
USB A male to USB B male
(Connect to the USB port
at the bottom of the
Touch chassis, above the
On/O switch)
TX3 Touch
Back-UPS
Uninterruptible
power supply
On/O switch
USB port
Ethernet cable
maximum distance:
46 m (150 feet)
Ethernet to USB A female
USB A male to Ethernet
(Connect to the USB
port at the bottom of
the Touch chassis, above
the On/O switch)
TX3 Touch
USB A male to USB B male
Back-UPS
Uninterruptible
power supply
On/O switch
USB port

LT-6714 Rev 0 http://www.mircom.com Page 2 of 3
C. Connect the Power Cable
Note: Read the manufacturer’s documentation included with the
uninterruptible power supply.
1. Connect the power supply cable from the Line terminals on the TX3-PS24-5A power
supply to one of the Battery Backup + Surge Protection receptacles on the
uninterruptible power supply.
2. Follow the manufacturer’s documentation to power on the uninterruptible power supply.
3. Go to page 3.
Back-UPS
Battery Backup + Surge Protection
TX3-PS24-5A
power supply
Power supply cable (included
with TX3-PS24-5A
Line
To AC outlet (follow
manufacturer's
instructions)

LT-6714 Rev 0 http://www.mircom.com Page 3 of 3
D. Install the APC PowerChute Personal Edition Software
(existing installations only)
Note: If you are installing TX3-TOUCH-UPS-KIT in an existing TX3
Touch installation, then you must install the APC software on
the TX3 Touch.
The APC software (in conjunction with the USB cable) ensures that the TX3 Touch will shut
down properly during a power outage.
1. Back up the Job to a USB Flash Drive
Note: For security, back up the job to a USB flash drive.
1. On the main touch screen display, enter 9999.
The administrator access code window appears.
2. Enter the password to log in to the system and press OK (by default the there is no
password).
3. Insert a USB flash drive into the USB port above the On/Off switch on the TX3 Touch.
4. Select File - Backup from the Menu Bar. The Backup Jobs window appears.
5. Select Backup current job only.
6. Click Browse and choose the USB flash drive as the location to store the backup files.
7. Click Backup Now.
2. Install the APC PowerChute Personal Edition Software
Note: Before you install the software, connect the uninterruptible power supply to the
TX3 Touch as described in section B on page 1.
1. Read the manufacturer’s documentation for instructions on how to get the APC
PowerChute Personal Edition software.
2. Transfer the APC software to a USB flash drive.
3. On the TX3 Touch, select File - Shut Down - Exit to Windows from the Menu Bar.
4. Click Yes.
The TX3 Touch software shuts down and the Windows Explorer appears.
5. Insert the USB flash drive into the USB port above the On/Off switch on the TX3 Touch.
6. In the Windows Explorer, double-click the icon for the USB flash drive.
7. Double-click the exe file for the APC software.
8. Follow the instructions on the screen to install the software.
9. During the installation, you may see a Hibernation Support Warning. This is normal.
Click OK on this warning.
10. After the software has been installed, double-click the Desktop folder, then double-click
the Restart icon to restart the TX3 Touch.
If you have questions, contact us at:
http://www.mircom.com Phone: [phone] Toll Free: 1-888-647-2665