MirrorVue RM150 User manual

Before installing, check to ensure that you have received all
the package contents.
Take the end of the receiver with the male plug and connect it with
the female plug of the mirror.
Your remote is connected and ready to use.
Check the items after receiving
Press the match button on the receiver. The circle above the word
run will start blinking red. Once that light is steady, then the
receiver has found the remote. A blue light will also flash on top
of the remote to indicate that it’s ready to use.
Match the Remote and the Receiver.
Please take note of the difference between
the male and female plugs.
RM150
Instruction Manual
Connect the Receiver and the Mirror.
2
4
Take the female end of the receiver and connect it with the male
plug of the power supply. Then plug the power supply to the
power source.
Connect the Receiver and the Power
Supply
3
1
Finished.
5
Receiver
RM150
Match
Run
PRI:
C
D
V6
3
-
21=n
iU
A
5
.02
=
nil
SEC:
CDV)63-21(x4=tuoU
Iout=4x5A
Pout=4x(60-180)W
TEMP 0
2
-
:
EG
N
A
R
℃05
+- ℃
ºtc=75℃
Female
Male
Match
Run
PRI:
CDV63-21=niU
A5.
02
=n
i
l
SEC:
C
DV
)6
3
-
21(x4=tuo
U
A5x4=tuoI
W)081-06(x4=tuoP
TEMP 02-:EGNAR ℃05+- ℃
ºtc=75℃
Remote
Holder
www.evervue.com

Slide the cover back into the remote.
Put the cover back.3
Gently slide down the cover at the back of the remote.
Remove the back Cover
Insert two AAA batteries into the remote. Ensure that the battery
is placed correctly to match the corresponding positive or negative
sign, otherwise it would not work.
RM150
Change Battery
Insert two AAA batteries.
21
AAA
AAA
www.evervue.com