Mistral MCF-D108HVLS User manual

USER GUIDE
v.1.31 Mar 2017
Distributor:
Khind Alliances Sdn. Bhd.
No. 2, Jalan Astaka U8/82, Bukit Jelutong,
40150 Shah Alam, Selangor, Malaysia.
Tel: [phone]
Fax:[phone]
Website : http://www.mistral.com.my/
Email : [e-mail]
9-ft Mid-Size BLDC HVLS Fan
MCF-D108HVLS

CAUTION, SAFETY & WARNINGS
Please read the installation instructions and study the diagrams thoroughly before
commencing to install the fan.
Ensure proper safety practices are followed.
Please ensure that the building structure is sound, able to hold at least 4x the weight
of the fan and thatthe mounting system is properly installed.
To prevent a possible electrical shock, disconnect powerto the fan when installing,
servicing or cleaning.
Electrical and installation works should be carried out by qualified persons.
When drilling into the ceiling, ensure thathidden electrical wirings are not damaged.
Installation parts provided should be used for its purpose and should not be
substituted.
Ensure there is a minimum gap between the tip of the fan blade and any object
(e.g. wall) of 300mm.
Ensure that there is a minimum height of 2.40m between the fan blade and floor.
After the fan installation is complete, ensure that all connections aresecure and
tight.
Stop using the fan immediately if any abnormality is encountered. Turn off the main
power supply to the fan.
It is recommended that the fan suspension system should be examined at regular
intervals at least once every 2 years.
Use only genuine fan replacement parts.
Do not attempt to disassemble the fan for any reasons. Please consult your seller for
assistance.
Leave this guide with the fan owner after the installation is complete.
REMOTE CONTROL OPERATIONS