MITO LIGHT BULB 4.0 User manual

Meet
your new
MITO LIGHT®
BULB 4.0
USER MANUAL

Thank you!
Dear customer, thank you for your trust. We are pleased that
you have purchased the MITO LIGHT® product.
We founded this company with an amazing team because
we live and breathe the opportunity to support health for
a far-reaching community.
We created MITO LIGHT® with a passion for sharing the
eects of red and near-infrared light with you.
We professionally design and develop our products to be
the best on the market, supplemented with an engaging
customer experience second to none.
Before using the MITO LIGHT® Bulb 4.0, please read this user
manual carefully, keep it for future reference, provide it to
other users, and follow the instructions in the user manual.
Your MITO LIGHT® team
Information
MITO LIGHT® Bulb 4.0 is CE, UKCA, and RoHS certied. All information provided is for educational purposes only and is
not intended to demonstrate the safety or ecacy of the MITO LIGHT® Bulb 4.0 in the diagnosis, treatment, or prevention
of any disease. MITO LIGHT® Bulb 4.0 and all information provided are not a substitute for a personal consultation with
a physician, do not diagnose health problems, and should not be construed as medical advice. It is essential to consult
a healthcare professional before use, especially if you have a pre-existing medical condition or are taking any medication.
MITO LIGHT® Bulb 4.0 is intended for illumination only. Individual results may vary.

Contents
Packaging contents
Accessories
Description
How does it work?
How to use the device
Explanation of symbols
Safety instructions
Technical data
Disposal
Warranty and claims
01
02
03
04
05
06
07
08
09
10

1x LED Light Bulb E27
1x Power Cable with Switch
1x Protective Goggles
1x User Manual
First, check that the LED Light Bulb E27 is complete and not damaged.
If in doubt, do not use the device and contact your dealer.
Packaging is recyclable or can be handed in for raw material recycling.
Please dispose of packaging material that is no longer needed in
accordance with the regulations. If you nd any damage caused by
shipping when unpacking, please contact your dealer immediately.
Packaging
contents
Accessories
Power Cable with Switch
- The power cable is designed for screwing in the device and then
connecting it to an electrical outlet. The switch is used to switch
the device on and o and to switch between the three lighting
modes.
Protective Goggles
- According to customer feedback, most users do not use
protective goggles and only keep their eyes closed during
shining. However, always wear protective goggles unless
otherwise instructed by your physician.

LED LIGHT BULB E27, MITO LIGHT® BULB 4.0
(from now on referred to as the "device")
The specications of the device, or the contents of this user manual
are subject to change without notice to improve the product's functions.
MITO LIGHT® device emits red and near-infrared light. It is
equipped with 18 high-power, double-chip LEDs with an
optimal selection of wavelengths, which have six peaks:
630, 660, 670, 810, 830, 850 nm. Each LED contains one red
and one near-infrared chip. This combination achieves a great
synergy in the form of red and near-infrared light.
Description

Red and near-infrared light is absorbed by chromophores in
the mitochondria (especially Cytochrome c Oxidase), leading
to an increase in mitochondrial membrane potential, oxygen
consumption, adenosine triphosphate (ATP), and a transient
increase in reactive oxygen species (ROS), which then results
in increased antioxidant activity.
It can therefore help to increase energy, accelerate muscle,
joint, and tendon regeneration, increase collagen
production, improve skin quality, improve blood circulation,
and have other positive eects.
Dierences in the use of red (RED) and near-infrared (NIR)
light
- Red light is absorbed by the skin. It can help improve the
skin's quality and appearance and speed up healing
wounds and scars.
-Near-infrared light penetrates deeper into the body. It
can help to improve the regeneration of muscles, joints,
and tendons or to increase cognitive function.
- Red and near-infrared spectra are the most often used
together and have synergistic eects.
How does it
work?

1. Follow the safety instructions.
2. Fix the fully unpacked device in the stable position you will use.
3. Screw in the device into the E27 thread on the power cable.
4. Plug the power cable into an electrical outlet.
5. Switch on the device using the switch on the power cable.
6. Choose your preferred lighting mode.
A) Switch on the device for the rst time → RED + NIR mode lights up.
B) Switch the device o and on within 10 seconds → RED mode lights up.
C) Switch the device o and on within 10 seconds → NIR mode lights up.
- After the next switch within 10 seconds, it reverts back to RED + NIR.
7. Memory function: If you leave the device turned on in any mode for more
than 10 seconds and then turn it o, the next time you turn it on, the last
mode that was used for more than 10 seconds is automatically activated.
8. Expose yourself to light without clothes at a distance of 15 - 50 cm
from the light for 10 - 20 minutes per day.
- According to customer feedback, most users do not use protective
goggles and only keep their eyes closed during shining. However, always
wear protective goggles unless otherwise instructed by your physician.
- With a shorter distance from the light, a shorter illumination time is needed,
and vice versa.
- This one light application applies to one illuminated area. One area can be
illuminated 1 - 2 times per day. If the same area is illuminated, we recommend
a total time of no more than 30 minutes per day.
9. When you have nished using it, rst turn o the power switch and then
pull the mains plug out of the socket. This completely disconnects the device
from the power supply.
How to use
the device

The following symbols are used in the user manual:
Warning
Warning of risk of injury or health hazard.
Attention
Safety warning for possible damage to device/accessories.
Opaque eye protection must be worn
DISPOSAL
Explanation
of symbols
INSTALLATION
• Place the device on a rm and level surface so that it does not fall, or hold it by the silicone part on the
power cable.
• Make sure that the device cannot fall.
• Use only the accessories supplied in the package. The manufacturer is only responsible for the safety of
the accessories included in the package, not for other accessories.
Safety
instructions

• Use the device only in accordance with its intended use as specied in this user manual.
• The device must not lie on the front side with the LEDs.
• The minimum distance between combustible objects and the device must be at least one meter.
• Do not place easily ammable or melting objects near the device.
• Do not use the device in a humid environment, near a bath or shower, near a soaked sink, or with
wet hands.
• Do not immerse the device in water or other liquids.
• Do not use the device in the open air.
• Protect the device from shock and vibration.
• Improper installation can cause the device to tip over or fall, resulting in serious injury or death.
• The manufacturer is not liable for damage or injury caused by the use of unapproved accessories
or improper installation.
• Always make sure the device is securely installed before use. If you are unsure of the installation,
contact your dealer or the listed customer service.
• Regularly check your installation to make sure it remains safe over time. If any part of the installation
appears to be weakening or deteriorating, stop using the device immediately and contact your dealer
or the listed customer service.
• Do not place the device in high movement areas where it could be accidentally knocked over.
• Keep the device out of reach of children and pets to prevent accidental drops or damage.
BEFORE SETTING INTO OPERATION
• Remove all packaging before using the device.
• Check the device for signs of wear or damage. If you doubt the device's damage, do not use it
and contact your dealer or the listed customer service.
• The manufacturer is not liable for damages caused by improper or incorrect use.
• Protect the device from dust, dirt, and moisture.
ELECTRICAL SAFETY
• Any inappropriate use can be dangerous!
• The device may only be connected to the mains voltage, whose value is indicated in this user manual.
• Use an easily accessible mains connection so that you can quickly pull the mains plug if necessary.
• Do not touch the mains plug and the device with wet hands. There is a risk of electric shock!
• Protect the power cable from contact with hot objects and open ames.
• Place the power cable so that no one can trip over it.
• Take care not to pinch the power cable.
• Unplug the mains plug whenever you are not using the device, cleaning it, or in case of a fault, smoke, or
smell. When pulling out the mains plug, pull the plug - not the cable!
• Before each use, ensure the device and its accessories are not visibly damaged. If in doubt, do not use
the device and contact your dealer or the listed customer service.
• In case of damage to the power cable or cover, contact your dealer or the listed customer service.
Otherwise, there is a risk of electrical shock.
• Do not use the device if the cable or power plug is damaged.
• Do not leave the device unattended when it is switched on.
• There is a risk of re or electric shock.
• The device is only safely disconnected from the mains when the mains plug is removed from the socket.

USE IN ACCORDANCE WITH THE INTENDED PURPOSE
• The device is intended for illumination only.
• Any other use shall be construed as non-conforming.
• This device is not intended to be used by persons (including children) with limited physical, sensory,
or mental abilities or lack of experience or knowledge unless they are supervised or instructed in
using this device by persons responsible for their safety.
• Keep packaging material out of the reach of children. Risk of suocation - small parts.
• The device must not be covered or wrapped in packaging when switched on.
• Never use the device near water.
• If the device has fallen to the ground or been exposed to excessive moisture or otherwise damaged,
it must not be used.
• The device must not be immersed in water or other liquid, and no liquid must enter it.
• Do not leave the device unattended during operation.
• Switch o the device immediately if it is defective or if the power cable is damaged.
• Do not use the device in the presence of ammable mixtures of narcotic gases and air, oxygen,
or nitric oxide.
• Do not change anything on the device without the manufacturer's consent.
• There is a risk of injury, electric shock, re, or damage to the device.
• This device is intended primarily for home use.
INSTRUCTIONS FOR SAFE USE OF THE DEVICE
• Do not look into the light source when shining, and wear protective goggles.
• Do not touch the device with wet hands when it is switched on.
• Do not touch the metal parts of the device during use.
• Water must not splash on the device.
• The device must only be used in a completely dry state.
• Remove all packaging material before using the device.
• When you have nished using it, turn o the power switch and pull the mains plug out of the socket.
• Do not use the device if it is not working properly or if you have dropped or fallen into the water,
or if it has been damaged.
• Remove ammable objects from the reach of the device.
• Do not use the device near a bath or shower, over a soaked sink, or with wet hands.
WHEN SHOULD THE DEVICE NOT BE USED?
• In acute inammatory processes, the device can be used only after consultation with a physician.
• For pregnant women, the device can be used only after consultation with a physician.
• For cancer patients, the device can be used only after consultation with a physician.
• For people with hyperthyroidism, the device can be used only after consultation with a physician.
• If a person is taking any medication that may aect light sensitivity, the device can be used only after
consultation with a physician.
• For children, the device can be used only after consultation with a physician and under the supervision
of an adult.
• Do not use on helpless people, children under 3 years of age, or people insensitive to heat (people with
skin diseases), after taking painkillers, alcohol, or drugs.
• Consult your physician if you have any health concerns!