MITO LIGHT STARTER 4.0 User manual

Meet
your new
MITO LIGHT®
STARTER 4.0
EXPERT 4.0
BIOHACKER 4.0
MITOHACKER 4.0
USER MANUAL

Thank you!
Dear customer, thank you for your trust. We are pleased that
you have purchased the MITO LIGHT® product.
We founded this company with an amazing team because
we live and breathe the opportunity to support health for
a far-reaching community.
We created MITO LIGHT® with a passion for sharing the eects
of red and near-infrared light with you.
We professionally design and develop our products to be
the best on the market, supplemented with an engaging
customer experience second to none.
Before using the MITO LIGHT® LED Light, please read this user
manual carefully, keep it for future reference, provide it to other
users, and follow the instructions in the user manual.
Your MITO LIGHT® team
Information
MITO LIGHT® LED Light is CE, UKCA, and RoHS certied. All information provided is for educational purposes only and is not
intended to demonstrate the safety or ecacy of the MITO LIGHT® LED Light in the diagnosis, treatment, or prevention
of any disease. MITO LIGHT® LED Light and all information provided are not a substitute for a personal consultation with a
physician, do not diagnose health problems, and should not be construed as medical advice. It is essential to consult a
healthcare professional before use, especially if you have a pre-existing medical condition or are taking any medication.
MITO LIGHT® LED Light is intended for illumination only. Individual results may vary.

Contents
Packaging contents
Description
How does it work?
Accessories
How to use the device
Explanation of symbols
Safety instructions
Technical data
Disposal
Warranty and claims
01
02
03
04
05
06
07
08
09
10

1x LED Light
1x Power Cable
1x Power Connection Cable
1x Protective Glasses
1x Hanging System
1x User Manual
First, check that the LED Light is complete and not damaged.
If in doubt, do not use the device and contact your dealer.
Packaging is recyclable or can be handed in for raw material recycling.
Please dispose of packaging material that is no longer needed in
accordance with the regulations. If you nd any damage caused by
shipping when unpacking, please contact your dealer immediately.
Packaging
contents

MITO LIGHT® LED LIGHT 4.0
(from now on referred to as the "device")
The specications of the device, the location of the individual elements in dierent models, or the contents of this user manual are subject
to change without notice to improve the product's functions. Illustrative photos are of the MITO LIGHT® Biohacker 4.0.
MITO LIGHT® device emits red and near-infrared light. It is equipped
with high-power, dual-chip LEDs with an optimal selection of
wavelengths, which have six peaks: 630, 660, 670, 810, 830, 850 nm.
All wavelength peaks are represented in the same proportion. Each
LED contains one red and one near-infrared chip. This combination
achieves a great synergy in the form of red and near-infrared light.
Description
Threads for vertical hanging
LEDs
Holes for connecting
devices underneath
Bottom protective pads
Handle
Power switch
Touch screen
Power cable connector
Power connection cable connector
Threads for stand connection
Cooling holes
Cooling fans
Back protective pads
1
2
3
4
5
6
7
8
9
10
11
12
13

Red and near-infrared light is absorbed by chromophores in the
mitochondria (especially Cytochrome c Oxidase), leading to an
increase in mitochondrial membrane potential, oxygen consumption,
adenosine triphosphate (ATP), and a transient increase in reactive
oxygen species (ROS), which then results in increased antioxidant
activity.
It can therefore help to increase energy, accelerate muscle, joint,
and tendon regeneration, increase collagen production, improve
skin quality, improve blood circulation, and have other positive eects.
Dierences in the use of red (RED) and near-infrared (NIR) light
- Red light is absorbed by the skin. It can help improve the skin's
quality and appearance and speed up healing wounds and scars.
-Near-infrared light penetrates deeper into the body. It can help to
improve the regeneration of muscles, joints, and tendons or to
increase cognitive function.
- Red and near-infrared spectra are the most often used together
and have synergistic eects.
How does it
work?

Power Cable
- It is designed to connect the device to an electrical outlet.
Power Connection Cable
- It is designed for electrical connection to another device.
- When using multiple devices, plug it to the device plugged into an electrical outlet
with the power cable, and then plug it into the next device. Connect each additional
device using the connection cable. The power limit of your electrical outlet
determines the maximum number of devices you can connect in this way.
Protective Glasses
- According to customer feedback, most users do not use protective glasses and
only keep their eyes closed during shining. However, always wear protective glasses
unless otherwise instructed by your physician.
Hanging System
- Eye screw, dowel
▪ It is designed to be mounted in a wall as a xed point for hanging the device.
▪ Drill a hole in a wall with sucient load-bearing capacity, insert the dowel, and
screw in the eye screw.
- Adjustable door hook
▪ It is designed to be mounted on a door as a xed point for hanging the device.
▪Attach the door hook to an open door from above and tighten it with a thread
to secure it in place.
- Steel cables with threads and carabiner, double-sided screws
▪It is designed to connect the device to the pulley with a rope for hanging
the device or to connect two devices underneath.
▪Pulley connection - Screw the double-sided screws into the threads on the top
of the device and then screw the steel cables' threads onto them.
▪Devices connection - Screw the double-sided screws into the bottom device's
top threads. Then, place these screws into the holes of the upper device,
securing them by tting the cut-outs into the tighter parts of the holes to
secure the device in place.
- Pulley with rope and carabiners
▪Hook the pulley's carabiner to the door hook or eye screw. Then, attach the
second carabiner to the one on the steel cables.
▪Adjust the carabiner to set the desired height for the hanged device.
Accessories

- Follow the safety instructions.
- Fix the fully unpacked device in the stable position you will use.
- Plug the power cable into the device, plug the power cable into an electrical outlet,
and turn on the power switch (position "I").
- Touch the "TIME" button on the touch screen and set the light time between
1 - 20 MIN. After adjusting, touch the "BACK" arrow button to return to the main menu.
- Touch the "LIGHT" button and adjust the RED and NIR light modes.
Use the sliders to choose the desired intensity of both spectra between 0 - 100%.
- Touch the "CHECK" button to start the light.
- Expose yourself to light without clothes at a distance of 15 - 50 cm from the light
for 10 - 20 minutes per day.
▪According to customer feedback, most users do not use protective glasses
and only keep their eyes closed during shining. However, always wear protective
glasses unless otherwise instructed by your physician.
▪With a shorter distance from the light, a shorter illumination time is needed,
and vice versa.
▪This one light application applies to one illuminated area. One area can be
illuminated 1 - 2 times per day. If the same area is illuminated, we recommend
a total time of no more than 30 minutes per day.
How to use
the device

- Touch the screen outside the time circle to go back to the main menu. You can
adjust the time or the intensity of RED and NIR spectra during your session.
- Touch the red power button in the main menu to return to YOUR SESSION screen.
-The light will automatically switch o after the set time has elapsed. To switch it
o manually, touch the time in the circle.
▪ If the time is set to 0 MIN, the light will stay on until you manually switch it o.
-When you have nished using the device, rst turn o the power switch
(position "O") and then pull the mains plug out of the socket. This completely
disconnects the device from the power supply.
Connection of Multiple Devices
- Touch the "CONNECT" button to choose "PRIMARY" or "SECONDARY" mode on all
of the devices you want to connect. The device selected as "PRIMARY" will control
all other devices selected as "SECONDARY". The device selected as "SOLO" will
work only separately.
- Choose the same GROUP SIGNAL number by touching the 1 or 2, or 3 buttons
on all devices you want to connect.
Silent Mode
- Touch the "SOUND" button in the right bottom corner to turn ON / OFF the sound
of the touch screen.
Bluetooth Connection
- Touch the "BLUETOOTH" button in the left bottom corner to turn ON / OFF the
Bluetooth. This function only serves for the APP Connection.
APP Connection
- Download the APP called "MITO LIGHT" from the App Store or Google Play.
- Turn on the Bluetooth on your device to be visible and pair it in the APP.
- You can use the APP to control your device remotely with your smartphone.

The following symbols are used in the user manual:
Warning
Warning of risk of injury or health hazard.
Attention
Safety warning for possible damage to device/accessories.
Opaque eye protection must be worn
DISPOSAL
Explanation
of symbols
INSTALLATION
• Place the device on a rm and level surface or hang it securely.
• The device is not stable when standing without support. Only use it leaning against a wall or other xed point to ensure it does not fall.
• When hanging the device, use only the accessories supplied in the package. The manufacturer is only responsible for the safety of the accessories
included in the package, not for other accessories or the places where they are hung.
• If you are using the device with a stand from our product range, please install it according to the user manual of the stand and secure
the device to the stand to prevent it from falling.
• Use the device only in accordance with its intended use as specied in this user manual.
• The device must not lie on the front side with the LEDs.
• The minimum distance between combustible objects and the device must be at least one meter.
• Do not place easily ammable or melting objects near the device.
• Do not use the device in a humid environment, near a bath or shower, near a soaked sink, or with wet hands.
• Do not immerse the device in water or other liquids.
• Do not use the device in the open air.
• Protect the device from shock and vibration.
• Improper installation can cause the device to tip over or fall, resulting in serious injury or death.
• The manufacturer is not liable for damage or injury caused by the use of unapproved accessories or improper installation.
• Always make sure the device is securely installed before use. If you are unsure of the installation, contact your dealer or the listed customer service.
• Do not attempt to hang the device in places that are not strong enough to support its weight.
• Regularly check your installation to make sure it remains safe over time. If any part of the installation appears to be weakening or deteriorating, stop
using the device immediately and contact your dealer or the listed customer service.
• Do not place the device in high movement areas where it could be accidentally knocked over.
• Keep the device out of reach of children and pets to prevent accidental drops or damage.
Safety
instructions

BEFORE SETTING INTO OPERATION
• Remove all packaging before using the device.
• Check the device for signs of wear or damage. If you doubt the device's damage, do not use it and contact your dealer or the listed customer
service.
• The manufacturer is not liable for damages caused by improper or incorrect use.
• Protect the device from dust, dirt, and moisture.
ELECTRICAL SAFETY
• Any inappropriate use can be dangerous!
• The device may only be connected to the mains voltage, whose value is indicated on the rating plate.
• Use an easily accessible mains connection so that you can quickly pull the mains plug if necessary.
• Do not touch the mains plug and the device with wet hands. There is a risk of electric shock!
• Protect the power cable from contact with hot objects and open ames.
• Place the power cable so that no one can trip over it.
• Take care not to pinch the power cable.
• Unplug the mains plug whenever you are not using the device, cleaning it, or in case of a fault, smoke, or smell. When pulling out the mains plug,
pull the plug - not the cable!
• Do not leave the device unattended when the power switch is in position „I” and the device is connected to the mains plug.
• Before each use, ensure the device and its accessories are not visibly damaged. If in doubt, do not use the device and contact your dealer or the
listed customer service.
• In case of damage to the power cable or cover, contact your dealer or the listed customer service. Otherwise, there is a risk of electrical shock.
• Do not use the device if the cable or power plug is damaged.
• Regularly check your installation to make sure it remains safe over time. If any part of the installation appears to be weakening or deteriorating,
stop using the device immediately and contact your dealer or the listed customer service.
• Do not place the device in high movement areas where it could be accidentally knocked over.
• Keep the device out of reach of children and pets to prevent accidental drops or damage.
• Do not leave the device unattended when it is switched on.
• There is a risk of re or electric shock.
• The device is only safely disconnected from the mains when the mains plug is removed from the socket.
USE IN ACCORDANCE WITH THE INTENDED PURPOSE
• The device is intended for illumination only.
• Any other use shall be construed as non-conforming.
• This device is not intended to be used by persons (including children) with limited physical, sensory, or mental abilities or lack of experience
or knowledge unless they are supervised or instructed in using this device by persons responsible for their safety.
• Keep packaging material out of the reach of children. Risk of suocation - small parts.
• The device must not be covered or wrapped in packaging when switched on.
• Never use the device near water.
• If the device has fallen to the ground or been exposed to excessive moisture or otherwise damaged, it must not be used.
• The device must not be immersed in water or other liquid, and no liquid must enter it.
• Do not leave the device unattended during operation and when the light alarm function is turned on.
• Switch o the device immediately if it is defective or if the power cable is damaged.
• Do not use the device in the presence of ammable mixtures of narcotic gases and air, oxygen, or nitric oxide.
• Do not change anything on the device without the manufacturer's consent.
• There is a risk of injury, electric shock, re, or damage to the device.
• This device is intended primarily for home use.
INSTRUCTIONS FOR SAFE USE OF THE DEVICE
• Do not look into the light source when shining, and wear protective goggles.
• Do not touch the device with wet hands when it is switched on.
• Water must not splash on the device.
• The device must only be used in a completely dry state.
• Remove all packaging material before using the device.
• When you have nished using it, turn o the power switch (position "O") and pull the mains plug out of the socket.
• Do not leave the device unattended when the power switch is in position „I” and the device is connected to the mains plug.
• Do not use the device if it is not working properly or if you have dropped or fallen into the water, or if it has been damaged.
• Remove ammable objects from the reach of the device.
• Do not use the device near a bath or shower, over a soaked sink, or with wet hands.
WHEN SHOULD THE DEVICE NOT BE USED?
• In acute inammatory processes, the device can be used only after consultation with a physician.
• For pregnant women, the device can be used only after consultation with a physician.
• For cancer patients, the device can be used only after consultation with a physician.
• For people with hyperthyroidism, the device can be used only after consultation with a physician.
• If a person is taking any medication that may aect light sensitivity, the device can be used only after consultation with a physician.
• For children, the device can be used only after consultation with a physician and under the supervision of an adult.
• Do not use on helpless people, children under 3 years of age, or people insensitive to heat (people with skin diseases), after taking painkillers,
alcohol, or drugs.

• Consult your physician if you have any health concerns!
• Use after injury or surgery is only allowed after consultation with a physician.
• The device is not suitable for people with reduced sensitivity to heat.
• Do not expose swollen, burned, or inamed parts of the body, areas aected by rashes, wounds, or other sensitive areas.
• Do not use the product if your skin burns or is insensitive.
• If skin irritation occurs, discontinue shining and seek medical help.
IMPORTANT NOTICES
• The distance from the device depends on individual light sensitivity and the specic need. Always ensure that the minimum distance
of 15 cm between the device and the body part to be illuminated is not exceeded.
• Do not illuminate one area for more than 30 minutes per day.
• Do not illuminate one area for more than 20 minutes at a time from a distance of less than 30 cm.
• Always check for skin and eye reactions. If the light burns your skin or eyes, turn the device o immediately and do not use it.
• Medications, cosmetics, or foods can lead to hypersensitivity or allergic skin reactions under certain circumstances. In this case, the lighting
must be stopped immediately.
• Special care and attention must be taken when operating the device.
• Do not use the device if you are tired and if there is a risk of falling asleep while the light is switched on.
• Too much light exposure can lead to cell stress and is potentially dangerous.
• Children do not know the dangers associated with electrical devices. Ensure that the device is not used by unsupervised children.
CLEANING AND REPAIR
• Under no circumstances may you open or otherwise repair the device. Otherwise, its faultless operation is not guaranteed. Failure to comply
with this policy will void the warranty.
• For repairs, please contact your dealer or the listed customer service.
• Improper handling can result in injury, electric shock, re, or damage to the device.
• You must not repair the device yourself. It does not contain any parts that you can repair yourself.
• Before cleaning, switch o the device, disconnect it from the mains, and allow it to cool down.
• Do not clean the device in the dishwasher!
• Do not use cleaning agents containing solvents.
• When cleaning, disconnect the power cable and gently wipe the device with a cloth.
• Do not spray water or other liquids directly on the device. Otherwise, electric shock or damage to the device may result.
STORAGE AND TRANSPORT
• Before moving the device, switch o the device and pull the mains plug.
• Let the device cool down before touching it.
• Store the device preferably in its original packaging and in a dry place.
• Allow the device to cool down before putting it into storage.
• Do not use or store the device where it will be exposed to toxic vapors or volatile substances.
• When transporting, ensure the product is switched o, unplugged, and all cables have been disconnected.
• Prevent objects from hitting and falling on the device.
IN THE EVENT OF AN EMERGENCY
• In the event of a re of the device, do not attempt to extinguish it with water. Use a re extinguisher suitable for electrical res.
• If the device emits smoke, sparks, or a strong burning smell, disconnect it from the mains immediately and contact your dealer or the listed
customer service.
• In such cases, do not attempt to repair or disassemble the device yourself. This could lead to further damage or injury.
• If the device causes an electric shock, disconnect it from the mains immediately. Do not directly touch a person connected to the electrical source.
Use a non-conductive object to separate the person from the electrical source and seek medical help immediately.
NOTICE
• There are no known side eects for the applications listed here, provided that all safety instructions in this user manual are followed.
• For all other uses not listed in this user manual, you may use this device only after consulting a physician.
• This device is not intended for industrial or clinical use.
• Consult your physician for health problems of any kind!
How do I know if the light is working properly?
-When the red spectrum (RED) is switched on, the LEDs light up, emitting a visible red intense light. At the same time, the fans turn on.
-When the near-infrared (NIR) spectrum is turned on, the LEDs light up, emitting invisible near-infrared light. This spectrum is invisible to
human eyes. Correct operation can be veried via the camera on a mobile phone. The lens of the camera can detect this light. At the same
time, the fans turn on.
-When both the red (RED) and near-infrared (NIR) spectra are switched on, all LEDs light up simultaneously. At the same time, the fans turn on.
How do I know if the light is not working properly?
-The red (RED) or near-infrared (NIR) LEDs do not light up or ash when switched on.
-Only a portion of the red (RED) or near-infrared (NIR) LEDs are illuminated when the red or near-infrared light is turned on.
-An unusual fan sound is heard when the red or near-infrared light is switched on.

Name and Model: MITO LIGHT® Starter 4.0 / Expert 4.0 / Biohacker 4.0 / Mitohacker 4.0
Power Consumption: Starter 4.0 - 109 W / Expert 4.0 - 277 W /
Biohacker 4.0 - 366 W / Mitohacker 4.0 - 720 W
Consumption: Starter 4.0 - 0.109 kWh / Expert 4.0 - 0.277 kWh /
Biohacker 4.0 - 0.366 kWh / Mitohacker 4.0 - 0.720 kWh
Dimensions (H x W x D): Starter 4.0 - 35 x 25 x 6.5 cm / Expert 4.0 - 66 x 25 x 6.5 cm /
Biohacker 4.0 - 92 x 25 x 6.5 cm / Mitohacker 4.0 - 92 x 41 x 6.5 cm
Weight: Starter 4.0 - 5.4 kg / Expert 4.0 - 6.9 kg /
Biohacker 4.0 - 9.1 kg / Mitohacker 4.0 - 15.7 kg
Power Input: AC 100-277V, 50/60Hz
Wavelengths: 630, 660, 670, 810, 830, 850 nm (1:1:1:1:1:1)
Operating Conditions: temperature between 10°C and 30°C, humidity between
40% and 60% (non-condensing), atmospheric pressure between 980 hPa and 1050 hPa,
altitude between 0 and 2000 m above sea level.
Storage Conditions: temperature between 0°C and 40°C,
humidity between 40% and 60% (non-condensing)
LED Lifespan: 50 000 hours of illumination
IP Rating: IP20
Materials: Metal, Plastic
Lens Beam Angle: 30 degrees
Certications: CE, UKCA, RoHS
Technical changes to improve and further develop the device and any printing errors are subject to change.
Technical data

In order to protect the environment, the device must not be disposed of in household waste.
Disposal must be carried out in accordance with local regulations.
The environmentally friendly disposal of electrical waste is ensured through the REMA System, a.s.
collection system. If you wish to dispose of your device, contact us at [e-mail], and we
will arrange a free worldwide pick-up of your device at your address and will arrange a transfer of the
device over to a collection point of REMA System, a.s..
Disposal
Warranty
and claims
MITO LIGHT® Starter 4.0, MITO LIGHT® Expert 4.0, MITO LIGHT® Biohacker 4.0,
MITO LIGHT® Mitohacker 4.0 are covered by a 3-year warranty.
If you have already received the device nonfunctional, or if any problem has occurred during use,
please follow the instructions on the page:
www.mitolight.com/complaints-and-returns
We will resolve your complaint in record time!
The Complaint Conditions can be found at:
www.mitolight.com/complaint-conditions

Product: MITO LIGHT®
Models: Starter 4.0, Expert 4.0, Biohacker 4.0, Mitohacker 4.0
Manufacturer: MITO LIGHT Logistics s.r.o.
Simerova 428/3, Doudlevce, 301 00 Pilsen, Czech Republic
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant Union harmonisation
legislation:
DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February
2014 on the harmonisation of the laws of the Member States relating to electromagnetic
compatibility (EMC)
DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February
2014 on the harmonisation of the laws of the Member States relating to the making available on
the market of electrical equipment designed for use within certain voltage limits (LVD)
DIRECTIVE 2014/53/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 April 2014
on the harmonisation of the laws of the Member States relating to the making available on the
market of radio equipment and repealing Directive 1999/5/EC (RED)
The full version of this declaration of conformity with references to the relevant harmonised
standards used, or references to the other technical specications, including the date of the
specication, in relation to which conformity is declared is available at:
www.mitolight.com/compliance
This Declaration of Conformity becomes void in the event of changes to mentioned product that have
not been approved by manufacturer.
Signed for and on behalf of: MITO LIGHT Logistics s.r.o.
Karel Mencl, executive director
In Pilsen, 10/8/2023

CUSTOMER SERVICE
[email protected]
[phone]
MITO LIGHT Logistics s.r.o.
Co. Reg. No.: 19262680
Simerova 428/3
301 00 Pilsen
Czech Republic