mitoredlight HELMET LED/LASER User manual

M I T O R E D L I G H T
H E L M E T ( L E D / L A S E R )
U S E R M A N U A L
www.mitoredlight.com

About us .......................................................................................................................... 03
Precautions related to the instruction manual ................................ 04
Product description ............................................................................................. 05
Contraindications ....................................................................................................06
Warnings and precautions .............................................................................. 07
Indications of use ...................................................................................................... 12
Component introduction .................................................................................... 14
How to use....................................................................................................................... 16
Session recommendations ................................................................................ 17
Cleaning and storage .......................................................................................... 20
Troubleshooting ......................................................................................................... 21
Product specifications ........................................................................................ 22
Warranty ......................................................................................................................... 23
Contents

About us
03
Located in Scottsdale, Arizona, Mito Red Light® is dedicated to
bringing the highest powered, highest quality red light therapy
lights to market at the best possible value.
Having extensively studied and realized the benefits of red light
therapy firsthand, Mito Red Light was brought into existence in
order to provide consumers truly affordable, yet highly effective
red light therapy options.
If you have any further questions, please feel free to contact us at:
info@mitoredlight.com
You can also call our phone number
Monday - Friday 9am - 5pm MST
+1 866-861-6486
Mail correspondence can be sent to:
Mito Red Light, Inc
9319 N 94th Way, Suite 400 Scottsdale, AZ 85258

Thank you
for purchasing the Mito Red Light Helmet (LED/Laser), please
read this manual carefully before use.
The Mito Red Light Helmet (LED/Laser) is indicated to promote
scalp health by delivering red light to the scalp. In order to use
the Helmet safely, please follow the instructions in the user
manual.
WARNING: Do not look directly into the any of the light emitters
inside the device.
The device is designed to function only when it is placed on the
head. The user bears responsibility for proper use of the helmet.
The Helmet is meant to be used ONLY on the head. DO NOT
attempt to use the helmet on any other parts of the body.
If you have any questions about the operation of the device,
please contact customer service : 1-866-861-6486 or email us
Precautions
04

The Mito Red Helmet is composed of 26 3R class laser diodes
(wavelength: 650-BB0nm, power<5mW) and 30 red light emitting
diodes (LEDs, wavelength: 640nm-660nm).
The helmet system is designed to automatically pause therapy if
the subject's head is moved outside of the zone of radiation and
will resume therapy when the correct head position is re-
established.
At the end of the therapy cycle, the system signals that therapy is
complete and ready to be powered down, by emitting an audible
beep pattern.
WARNING: DO NOT LOOK DIRECTLY AT ANY OF
THE LIGHT-EMITTERS INSIDE THE DEVICE.
Product description
05

Do not use the device if you have cancer on your scalp.
The device should not be used by or on children under 18 years of
age.
Do not use the device if your skin is sensitive or allergic to laser
(650-660nm). Sensitive skin or allergic reactions may cause itchy
scalp or sunburn redness, for example, redness, etc., if there is any
abnormal condition when using, please stop using immediately
and consult a physician.
Do not use the device if you have a medical condition that makes
your skin sensitive to sun or light, or if you are taking
photosensitizing medications.
NO
NO
NO
The Mito Red Light LED Helmet is contraindicated in the
following situations:
Contraindictations
06

Do not look directly at the light source or use an optical instrument
(such as a magnifying glass or microscope) to observe the light
source. It may damage your eyes.
Warning: To control or adjust the laser/LED helmet or to
perform any step of the operation other than those
specified in the operating instructions, may cause
hazards such as possible harmful radiation, electric
shock, fire or malfunction.
Discontinue use of the device if scalp itching or tingling occurs
and lasts more than one hour after completion of a session. If
the problem continues for more than one hour after the session,
discontinue use and consult with a physician.
NO
NO
Do not disassemble, modify, or repair the LED helmet.
NO
Warnings and precautions
07

Do not allow the helmet or controller to come into to contact
with water while in use. This could cause the product to
malfunction.
Do not place the device or controller where it can fall or be pulled
into a sink or a tub. This could cause the product to malfunction.
Never use the device while sitting in the bathtub or swimming
pool. This could cause the product to malfunction.
Do not put tension on the cord while handling, untangle or
straighten the cord. The tension may break the cord, which could
result in a malfunction or electrical hazard.
NO
NO
NO
NO
Warnings and precautions
08

Do not operate the device if it has a damaged cord, controller, or
helmet. If you notice damages to the above, please contact Mito
Red Light.
Do not use the device when your hair is wet from showering,
swimming or bathing etc. Towel dry your hair before use. Wet hair
may result in the product to malfunction or preventing the laser
light from being delivered to the scalp.
Always keep the helmet or controller away from hot or heated
surfaces such as radiators, stoves, ovens or room heaters. If the
helmet or remote control makes contact with a hot or heated
surface, it can cause the product to malfunction.
NO
NO
NO
Warnings and precautions
09

Keep the lasers and device out of reach of children and pets. The
laser light may cause harm or injury to your children and pets if
they look directly at the laser light.
Only use the device according to the instructions provided. The
device is for scalp and hair follicle health and for use on the scalp
only.
Please turn off the power before cleaning the device, otherwise the
product may become damaged
YES
NO
NO
Warnings and precautions
10

Avoid dropping the device, as this may cause the device to
malfunction and become damaged. If you drop the device or
suspect device malfunction (e.g. device exterior cracks, lasers do
not light up, or the device does not turn on), contact Mito Red Light
to request repair or replacement.
NO
Warnings and precautions
11
WARNING: DO NOT LOOK DIRECTLY AT ANY OF
THE LIGHT-EMITTERS INSIDE THE DEVICE.

Indications of use
12
The LED/Laser is indicated to promote hair growth in males with
androgenetic alopecia who have Hamilton-Norwood
Classifications of IIa-V and females with androgenetic alopecia
who have Ludwig-Savin Classifications of I-II and Fitzpatrick
Classification of Skin Phototypes I to IV. All users should have
Fitzpatrick Skin Types I to IV.

Indications of use
13
The device is indicated for males and females who have
Fitzpatrick Skin Types I to IV.
Type I: Highly sun-sensitive, always burns, never tans (e.g. pale,
freckled or white skin)
Type II: Very sun-sensitive, burns easily, rarely tans (e.g. fair skin)
Type III: Sun-sensitive, sometimes burns, sometimes tans (e.g. light
brown or olive skin)
Type IV: Minimally sun-sensitive, burns minimally, tans easily (e.g.
brown skin)
The device is not indicated for males and females who have
Fitzpatrick Skin Types V or VI.
Type V: Sun-insensitive, rarely burns, always tans (e.g. dark brown
skin)
Type VI: Sun-insensitive, never burns, always tans darkly (e.g.
black skin)

Schematic diagram of the LED helmet
LED Helmet
Power Adapter
Controller
User Manual
1
1
1
1
What's included
Component introduction
14

Component introduction
15

WARNING: The helmet has an infrared sensing function. It will not
work normally unless the helmet is worn correctly on the head. If
the helmet is removed from the head or not situated properly on
the head, it will automatically stop working until it is properly
repositioned on the head.
Preparation
Remove the device from the packaging.
Step 1 - Position
Position the device on your head in a
comfortable position.
Step 2 - Power on
Plug the interface end of the power adapter into the interface of
the remote controller of helmet, then plug the power adapter into
the socket. You will hear a beep sound which indicates that the
power has been successfully electrified.
How to use
16

Step 3 - Turn on
Hold the "ON/OFF" button for 3 seconds
to start the machine.
Note: If not pressed within one minute
the "START/PAUSE" button, the helmet
will automatically shut down.
Step 4 - Use the device
Press the "START/PAUSE" button to
begin the 25-minute countdown, a
"beep" sound indicates the session
has started. Once the session is
completed, the device will turn off
automatically after "beep" sound.
How to use
17
WARNING: DO NOT LOOK DIRECTLY AT ANY OF
THE LIGHT-EMITTERS INSIDE THE DEVICE.

Step 6 - Turn off
1. After using 25 minutes, the device will "beep" and then tum off
automatically.
2. After the device is powered on, if the "Star/Pause" button is not
pressed for more than 1 minute, the device will shut down
automatically.
3. To turn off the device, hold the "ON/OFF" button for 3 seconds.
Disconnect the power adapter from the remote controller.
4. Take off the hair growth device and place it on a horizontal
surface so that the inner surface is facing downward.
5. Unplug the power adapter from the electrical power outlet.
Because of the remaining capacitance (remaining power), the
display on the controller might stay on, it will automatically shut
down after a few seconds.
How to use
18
Step 5 - Pause
If you need to pause the session at any
time, press the "START/PAUSE" button
and the timer will flash and the device
will pause.
Press the "START/PAUSE" button to
resume the session. A "beep" sound will
indicate the session has resumed.
If the "START/PAUSE" button is not pressed within 5 minutes during
a paused session, the device will turn off automatically.

It is recommended that you use the laser/LED device for 25
minutes every other day for 16 weeks. After 16 weeks you may
wish to continue using the device for 25 minutes every other
day according to your own goals.
Session recommendations
19
WARNING: DO NOT LOOK DIRECTLY AT ANY OF
THE LIGHT-EMITTERS INSIDE THE DEVICE.

Storage & Transportation Temp -30℃ ~ 60℃ (-22°F ~ 140°F)
Storage & Transportation Humidity 10% ~ 95%RH
Storage & Transportation Pressure 500 ~ 1060 hPa
Keep the device away from sunlight and store the device in a dry
location (e.g. away from windows, sinks, bathtubs, kitchens, and
bathrooms) at around room temperature after each use.
Gently clean the product before each use and keep the
product off.
First wipe the helmet surfaces with a clean cloth lightly
dampened with clean water. Inspect the surfaces thoroughly
for any remaining visible contaminants, and repeat wiping if
necessary until no visible contaminants remain.
Allow to air dry. Then wipe the helmet surfaces with a clean
cloth dampened with 70% ethanol or 70% isopropyl alcohol.
Allow contact time of 1 minute and then allow to air dry.
Do not use the device unless it is completely dry.
If the product is not used for a long time, pay attention to
moisture and dust: power on once every 3 months and
charge once every 6 months to avoid moisture aging and
damage of internal components.
Warning: If the product is taken out of the highest or
lowest storage environment and placed in a room
temperature environment it can be used normally only
after standing for at least 1 hour.
20
Cleaning and storage
Table of contents
Other mitoredlight Motorcycle Accessories manuals
Popular Motorcycle Accessories manuals by other brands

R&G
R&G LP0308BK Fitting instructions

hepco & becker
hepco & becker 6613528 01 01 manual

AltRider
AltRider Headlight Guard installation instructions

ClearWater Lights
ClearWater Lights Dixie installation manual

AGV
AGV GP TECH Owner's instructions

hepco & becker
hepco & becker 6307623 00 01 Mounting instructions

Suzuki
Suzuki 990D0-17K36-000 installation instructions

Rekluse Motor Sports
Rekluse Motor Sports Core Manual installation guide

LSK
LSK CRF1100-OFFROAD-DONGLE installation manual

Cardo Systems
Cardo Systems ScalaRider installation instructions

Shad
Shad NADSA Y0FZ16ST manual

Yoshimura
Yoshimura ENDURO 24140AH320 manual