Mitsubishi Electric E Series Product guide

EAHV-P1500YBL(-H)(-N)(-BS)
EAHV-P1800YBL(-H)(-N)(-BS)
EACV-P1500YBL(-N)(-BS)
EACV-P1800YBL(-N)(-BS)
MODEL

EAHV-P-YBL(-H)(-N), EACV-P-YBL(-N)
MEES19K040 1
CONTENTS
I.
1. Product Specifications .............................................................................................................................. 2
1-1. Specifications................................................................................................................................... 2
1-2. External Dimensions........................................................................................................................ 8
1-3. Center of Gravity.............................................................................................................................. 15
1-4. Electrical Wiring Diagrams............................................................................................................... 16
1-5. Optional parts .................................................................................................................................. 21
2. Product Data............................................................................................................................................. 26
2-1. Capacity tables ................................................................................................................................ 26
2-2. Sound pressure levels ..................................................................................................................... 47
2-3. Vibration levels ................................................................................................................................ 50
2-4. Salt Protection Specifications .......................................................................................................... 51
3. Installation................................................................................................................................................. 52
3-1. Selecting the Installation Site........................................................................................................... 52
3-2. Unit Installation ................................................................................................................................ 55
4. System Design.......................................................................................................................................... 57
4-1. Water Pipe Installation..................................................................................................................... 57
5. Wiring Design............................................................................................................................................ 64
5-1. System Configurations..................................................................................................................... 64
5-2. Electrical Wiring Installation ............................................................................................................. 88
6. Controller .................................................................................................................................................. 91
6-1. PAR-W31MAA specifications .......................................................................................................... 91
0000005210.BOOK 1 ページ ２０１９年６月２０日 木曜日 午後３時３２分

MEES19K040
EAHV-P-YBL(-H)(-N), EACV-P-YBL(-N)
2
1. Product Specifications
I.1. Product Specifications
1-1. Specifications
Model EAHV-P1500YBL(-N)(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 150.00
kcal/h 129,000
BTU/h 511,800
Power input kW 45.10
EER 3.33
IPLV *6 6.55
Water flow rate m3/h 25.8
Cooling capacity(EN14511) *2 kW 148.58
kcal/h 127,779
BTU/h 506,955
Power input kW 46.52
EER 3.19
Eurovent efficiency class A
ESEER *7 4.74
SEER 4.62
Water flow rate m3/h 25.8
Heating capacity *3 kW 150.00
kcal/h 129,000
BTU/h 511,800
Power input kW 44.59
COP 3.36
Water flow rate m3/h 25.8
Heating capacity(EN14511) *4 kW 151.42
kcal/h 130,221
BTU/h 516,645
Power input kW 46.01
COP 3.29
Eurovent efficiency class A
SCOP (Reversible) Low/Medium 3.24/2.85
Water flow rate m3/h 25.8
Current input Cooling current 380-400-415V *1 A 77-73-70
Heating current 380-400-415V *3 A 76-72-69
Maximum current A 111
Water pressure drop *1 kPa 114
Temp range Cooling °C Outlet water 5~30 *8
°F Outlet water 41~86 *8
Heating °C Outlet water 30~55 *8
°F Outlet water 86~131 *8
Outdoor °C -15~43 *8
°F 5~109.4 *8
Circulating water volume range m3/h 12.9~34.0
Sound pressure level (measured in anechoic room) at 1m *1 dB (A) 66
Sound power level (measured in anechoic room) *1 dB (A) 84
Diameter of water pipe Inlet mm (in) 65A (2 1/2B) housing type joint
(Standard piping) Outlet mm (in) 65A (2 1/2B) housing type joint
Diameter of water pipe Inlet mm (in) 150A (6B) housing type joint
(Inside header piping) Outlet mm (in) 150A (6B) housing type joint
External finish Polyester powder coating steel plate
External dimension H × W × D mm 2350 × 3400 × 1080
Net weight Standard piping kg (lbs) 1310 (2888)
Inside header piping kg (lbs) 1326 (2923)
Design pressure R410A MPa 4.15
Water MPa 1.0
Heat exchanger Water side Stainless steel plate and copper brazing
Air side Plate fin and copper tube
Compressor Type Inverter scroll hermetic compressor
Maker MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Quantity 4
Motor output kW 11.7 × 4
Lubricant MEL32
Fan Air flow rate m3/min 265 × 4
L/s 4417 × 4
cfm 9357 × 4
Type, Quantity Propeller fan × 4
Starting method Inverter
Motor output kW 0.92 × 4
Protection High pressure protection High pres.Sensor & High pres.Switch at 4.15MPa (601psi)
Inverter circuit Over-heat protection, Over current protection
Compressor Over-heat protection
Refrigerant Type × charge R410A × 15(kg) × 4 *5
Control LEV
Notes: Unit converter
*1 Under normal cooling conditions at outdoor temp 35°CDB/24°CWB(95°FDB/75.2°FWB) outlet water temp 7°C(44.6°F)
inlet water temp 12°C(53.6°F). Pump input is not included in cooling capacity and power input.
*2 Under normal cooling conditions at outdoor temp 35°CDB/24°CWB(95°FDB/75.2°FWB) outlet water temp 7°C(44.6°F)
inlet water temp 12°C(53.6°F). Pump input is included in cooling capacity and power input based on EN14511.
*3 Under normal heating conditions at outdoor temp 7°CDB/6°CWB(44.6°FDB/42.8°FWB) outlet water temp 45°C(113°F)
inlet water temp 40°C(104°F). Pump input is not included in heating capacity and power input.
*4 Under normal heating conditions at outdoor temp 7°CDB/6°CWB(44.6°FDB/42.8°FWB) outlet water temp 45°C(113°F)
inlet water temp 40°C(104°F). Pump input is included in heating capacity and power input based on EN14511.
*5 Amount of factory-charged refrigerant is 3(kg) × 4. Please add the refrigerant at the field.
*6 IPLV is calculated in accordance with AHRI 550-590.
*7 ESEER is calculated in accordance with EUROVENT conditions.
*Please don't use the steel material for the water piping.
*Please always make water circulate, or pull the circulation water out completely when not in use.
*Please do not use groundwater or well water in direct.
*The water circuit must be closed circuit.
*Due to continuous improvement, the above specifications may be subject to change without notice.
*This model doesn't equip with a pump.
*8 Please refer to 2-1-6. Operation temperature range.
kcal/h = kW × 860
BTU/h = kW × 3,412
lbs = kg/0.4536
cfm = m3/min × 35.31
0000005210.BOOK 2 ページ ２０１９年６月２０日 木曜日 午後３時３２分

MEES19K040
EAHV-P-YBL(-H)(-N), EACV-P-YBL(-N)
3
1. Product Specifications
Model EAHV-P1800YBL(-N)(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 180.00
kcal/h 154,800
BTU/h 614,160
Power input kW 59.01
EER 3.05
IPLV *6 6.33
Water flow rate m3/h 31.0
Cooling capacity(EN14511) *2 kW 177.76
kcal/h 152,874
BTU/h 606,517
Power input kW 61.25
EER 2.90
Eurovent efficiency class B
ESEER *7 4.45
SEER 4.58
Water flow rate m3/h 31.0
Heating capacity *3 kW 180.00
kcal/h 154,800
BTU/h 614,160
Power input kW 55.68
COP 3.23
Water flow rate m3/h 31.0
Heating capacity(EN14511) *4 kW 182.24
kcal/h 156,726
BTU/h 621,803
Power input kW 57.92
COP 3.15
Eurovent efficiency class B
SCOP (Reversible) Low/Medium 3.24/2.85
Water flow rate m3/h 31.0
Current input Cooling current 380-400-415V *1 A 77-73-70
Heating current 380-400-415V *3 A 76-72-69
Maximum current A 111
Water pressure drop *1 kPa 164
Temp range Cooling °C Outlet water 5~30 *8
°F Outlet water 41~86 *8
Heating °C Outlet water 30~55 *8
°F Outlet water 86~131 *8
Outdoor °C -15~43 *8
°F 5~109.4 *8
Circulating water volume range m3/h 12.9~34.0
Sound pressure level (measured in anechoic room) at 1m *1 dB (A) 68
Sound power level (measured in anechoic room) *1 dB (A) 86
Diameter of water pipe Inlet mm (in) 65A (2 1/2B) housing type joint
(Standard piping) Outlet mm (in) 65A (2 1/2B) housing type joint
Diameter of water pipe Inlet mm (in) 150A (6B) housing type joint
(Inside header piping) Outlet mm (in) 150A (6B) housing type joint
External finish Polyester powder coating steel plate
External dimension H × W × D mm 2350 × 3400 × 1080
Net weight Standard piping kg (lbs) 1310 (2888)
Inside header piping kg (lbs) 1326 (2923)
Design pressure R410A MPa 4.15
Water MPa 1.0
Heat exchanger Water side Stainless steel plate and copper brazing
Air side Plate fin and copper tube
Compressor Type Inverter scroll hermetic compressor
Maker MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Quantity 4
Motor output kW 11.7 × 4
Lubricant MEL32
Fan Air flow rate m3/min 265 × 4
L/s 4417 × 4
cfm 9357 × 4
Type, Quantity Propeller fan × 4
Starting method Inverter
Motor output kW 0.92 × 4
Protection High pressure protection High pres.Sensor & High pres.Switch at 4.15MPa (601psi)
Inverter circuit Over-heat protection, Over current protection
Compressor Over-heat protection
Refrigerant Type × charge R410A × 15(kg) × 4 *5
Control LEV
Notes: Unit converter
*1 Under normal cooling conditions at outdoor temp 35°CDB/24°CWB(95°FDB/75.2°FWB) outlet water temp 7°C(44.6°F)
inlet water temp 12°C(53.6°F). Pump input is not included in cooling capacity and power input.
*2 Under normal cooling conditions at outdoor temp 35°CDB/24°CWB(95°FDB/75.2°FWB) outlet water temp 7°C(44.6°F)
inlet water temp 12°C(53.6°F). Pump input is included in cooling capacity and power input based on EN14511.
*3 Under normal heating conditions at outdoor temp 7°CDB/6°CWB(44.6°FDB/42.8°FWB) outlet water temp 45°C(113°F)
inlet water temp 40°C(104°F). Pump input is not included in heating capacity and power input.
*4 Under normal heating conditions at outdoor temp 7°CDB/6°CWB(44.6°FDB/42.8°FWB) outlet water temp 45°C(113°F)
inlet water temp 40°C(104°F). Pump input is included in heating capacity and power input based on EN14511.
*5 Amount of factory-charged refrigerant is 3(kg) × 4. Please add the refrigerant at the field.
*6 IPLV is calculated in accordance with AHRI 550-590.
*7 ESEER is calculated in accordance with EUROVENT conditions.
*Please don't use the steel material for the water piping.
*Please always make water circulate, or pull the circulation water out completely when not in use.
*Please do not use groundwater or well water in direct.
*The water circuit must be closed circuit.
*Due to continuous improvement, the above specifications may be subject to change without notice.
*This model doesn't equip with a pump.
*8 Please refer to 2-1-6. Operation temperature range.
kcal/h = kW × 860
BTU/h = kW × 3,412
lbs = kg/0.4536
cfm = m3/min × 35.31
0000005210.BOOK 3 ページ ２０１９年６月２０日 木曜日 午後３時３２分

MEES19K040
EAHV-P-YBL(-H)(-N), EACV-P-YBL(-N)
4
1. Product Specifications
Model EAHV-P1500YBL-H(-N)(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Heating capacity *1 kW 150.00
kcal/h 129,000
BTU/h 511,800
Power input kW 44.59
COP 3.36
Water flow rate m3/h 25.8
Heating capacity(EN14511) *2 kW 151.42
kcal/h 130,221
BTU/h 516,645
Power input kW 46.01
COP 3.29
Eurovent efficiency class A
SCOP (Heating only) Low/Medium 3.20/2.83
Water flow rate m3/h 25.8
Current input Heating current 380-400-415V *1 A 76-72-69
Maximum current A 111
Water pressure drop *1 kPa 114
Temp range Heating °C Outlet water 30~55 *4
°F Outlet water 86~131 *4
Outdoor °C -15~43 *4
°F 5~109.4 *4
Circulating water volume range m3/h 12.9~34.0
Sound pressure level (measured in anechoic room) at 1m *1 dB (A) 66
Sound power level (measured in anechoic room) *1 dB (A) 84
Diameter of water pipe Inlet mm (in) 65A (2 1/2B) housing type joint
(Standard piping) Outlet mm (in) 65A (2 1/2B) housing type joint
Diameter of water pipe Inlet mm (in) 150A (6B) housing type joint
(Inside header piping) Outlet mm (in) 150A (6B) housing type joint
External finish Polyester powder coating steel plate
External dimension H × W × D mm 2350 × 3400 × 1080
Net weight Standard piping kg (lbs) 1310 (2888)
Inside header piping kg (lbs) 1326 (2923)
Design pressure R410A MPa 4.15
Water MPa 1.0
Heat exchanger Water side Stainless steel plate and copper brazing
Air side Plate fin and copper tube
Compressor Type Inverter scroll hermetic compressor
Maker MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Quantity 4
Motor output kW 11.7 × 4
Lubricant MEL32
Fan Air flow rate m3/min 265 × 4
L/s 4417 × 4
cfm 9357 × 4
Type, Quantity Propeller fan × 4
Starting method Inverter
Motor output kW 0.92 × 4
Protection High pressure protection High pres.Sensor & High pres.Switch at 4.15MPa (601psi)
Inverter circuit Over-heat protection, Over current protection
Compressor Over-heat protection
Refrigerant Type × charge R410A × 15(kg) × 4 *3
Control LEV
Notes: Unit converter
*1 Under normal heating conditions at outdoor temp 7°CDB/6°CWB(44.6°FDB/42.8°FWB) outlet water temp 45°C(113°F)
inlet water temp 40°C(104°F). Pump input is not included in heating capacity and power input.
*2 Under normal heating conditions at outdoor temp 7°CDB/6°CWB(44.6°FDB/42.8°FWB) outlet water temp 45°C(113°F)
inlet water temp 40°C(104°F). Pump input is included in heating capacity and power input based on EN14511.
*3 Amount of factory-charged refrigerant is 3(kg) × 4. Please add the refrigerant at the field.
*Please don't use the steel material for the water piping.
*Please always make water circulate, or pull the circulation water out completely when not in use.
*Please do not use groundwater or well water in direct.
*The water circuit must be closed circuit.
*Due to continuous improvement, the above specifications may be subject to change without notice.
*This model doesn't equip with a pump.
*4 Please refer to 2-1-6. Operation temperature range.
kcal/h = kW × 860
BTU/h = kW × 3,412
lbs = kg/0.4536
cfm = m3/min × 35.31
0000005210.BOOK 4 ページ ２０１９年６月２０日 木曜日 午後３時３２分

MEES19K040
EAHV-P-YBL(-H)(-N), EACV-P-YBL(-N)
5
1. Product Specifications
Model EAHV-P1800YBL-H(-N)(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Heating capacity *1 kW 180.00
kcal/h 154,800
BTU/h 614,160
Power input kW 55.68
COP 3.23
Water flow rate m3/h 31.0
Heating capacity(EN14511) *2 kW 182.24
kcal/h 156,726
BTU/h 621,803
Power input kW 57.92
COP 3.15
Eurovent efficiency class B
SCOP (Heating only) Low/Medium 3.20/2.83
Water flow rate m3/h 31.0
Current input Heating current 380-400-415V *1 A 76-72-69
Maximum current A 111
Water pressure drop *1 kPa 164
Temp range Heating °C Outlet water 30~55 *4
°F Outlet water 86~131 *4
Outdoor °C -15~43 *4
°F 5~109.4 *4
Circulating water volume range m3/h 12.9~34.0
Sound pressure level (measured in anechoic room) at 1m *1 dB (A) 68
Sound power level (measured in anechoic room) *1 dB (A) 86
Diameter of water pipe Inlet mm (in) 65A (2 1/2B) housing type joint
(Standard piping) Outlet mm (in) 65A (2 1/2B) housing type joint
Diameter of water pipe Inlet mm (in) 150A (6B) housing type joint
(Inside header piping) Outlet mm (in) 150A (6B) housing type joint
External finish Polyester powder coating steel plate
External dimension H × W × D mm 2350 × 3400 × 1080
Net weight Standard piping kg (lbs) 1310 (2888)
Inside header piping kg (lbs) 1326 (2923)
Design pressure R410A MPa 4.15
Water MPa 1.0
Heat exchanger Water side Stainless steel plate and copper brazing
Air side Plate fin and copper tube
Compressor Type Inverter scroll hermetic compressor
Maker MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Quantity 4
Motor output kW 11.7 × 4
Lubricant MEL32
Fan Air flow rate m3/min 265 × 4
L/s 4417 × 4
cfm 9357 × 4
Type, Quantity Propeller fan × 4
Starting method Inverter
Motor output kW 0.92 × 4
Protection High pressure protection High pres.Sensor & High pres.Switch at 4.15MPa (601psi)
Inverter circuit Over-heat protection, Over current protection
Compressor Over-heat protection
Refrigerant Type × charge R410A × 15(kg) × 4 *3
Control LEV
Notes: Unit converter
*1 Under normal heating conditions at outdoor temp 7°CDB/6°CWB(44.6°FDB/42.8°FWB) outlet water temp 45°C(113°F)
inlet water temp 40°C(104°F). Pump input is not included in heating capacity and power input.
*2 Under normal heating conditions at outdoor temp 7°CDB/6°CWB(44.6°FDB/42.8°FWB) outlet water temp 45°C(113°F)
inlet water temp 40°C(104°F). Pump input is included in heating capacity and power input based on EN14511.
*3 Amount of factory-charged refrigerant is 3(kg) × 4. Please add the refrigerant at the field.
*Please don't use the steel material for the water piping.
*Please always make water circulate, or pull the circulation water out completely when not in use.
*Please do not use groundwater or well water in direct.
*The water circuit must be closed circuit.
*Due to continuous improvement, the above specifications may be subject to change without notice.
*This model doesn't equip with a pump.
*4 Please refer to 2-1-6. Operation temperature range.
kcal/h = kW × 860
BTU/h = kW × 3,412
lbs = kg/0.4536
cfm = m3/min × 35.31
0000005210.BOOK 5 ページ ２０１９年６月２０日 木曜日 午後３時３２分

MEES19K040
EAHV-P-YBL(-H)(-N), EACV-P-YBL(-N)
6
1. Product Specifications
Model EACV-P1500YBL(-N)(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 150.00
kcal/h 129,000
BTU/h 511,800
Power input kW 45.10
EER 3.33
IPLV *4 6.55
Water flow rate m3/h 25.8
Cooling capacity(EN14511) *2 kW 148.58
kcal/h 127,779
BTU/h 506,955
Power input kW 46.52
EER 3.19
Eurovent efficiency class A
ESEER *5 4.74
SEER 4.62
Water flow rate m3/h 25.8
Current input Cooling current 380-400-415V *1 A 77-73-70
Maximum current A 111
Water pressure drop *1 kPa 114
Temp range Cooling °C Outlet water 5~30 *6
°F Outlet water 41~86 *6
Outdoor °C -15~43 *6
°F 5~109.4 *6
Circulating water volume range m3/h 12.9~34.0
Sound pressure level (measured in anechoic room) at 1m *1 dB (A) 66
Sound power level (measured in anechoic room) *1 dB (A) 84
Diameter of water pipe Inlet mm (in) 65A (2 1/2B) housing type joint
(Standard piping) Outlet mm (in) 65A (2 1/2B) housing type joint
Diameter of water pipe Inlet mm (in) 150A (6B) housing type joint
(Inside header piping) Outlet mm (in) 150A (6B) housing type joint
External finish Polyester powder coating steel plate
External dimension H × W × D mm 2350 × 3400 × 1080
Net weight Standard piping kg (lbs) 1240 (2734)
Inside header piping kg (lbs) 1256 (2769)
Design pressure R410A MPa 4.15
Water MPa 1.0
Heat exchanger Water side Stainless steel plate and copper brazing
Air side Plate fin and copper tube
Compressor Type Inverter scroll hermetic compressor
Maker MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Quantity 4
Motor output kW 11.7 × 4
Lubricant MEL32
Fan Air flow rate m3/min 265 × 4
L/s 4417 × 4
cfm 9357 × 4
Type, Quantity Propeller fan × 4
Starting method Inverter
Motor output kW 0.92 × 4
Protection High pressure protection High pres.Sensor & High pres.Switch at 4.15MPa (601psi)
Inverter circuit Over-heat protection, Over current protection
Compressor Over-heat protection
Refrigerant Type × charge R410A × 15(kg) × 4 *3
Control LEV
Notes: Unit converter
*1 Under normal cooling conditions at outdoor temp 35°CDB/24°CWB(95°FDB/75.2°FWB) outlet water temp 7°C(44.6°F)
inlet water temp 12°C(53.6°F). Pump input is not included in cooling capacity and power input.
*2 Under normal cooling conditions at outdoor temp 35°CDB/24°CWB(95°FDB/75.2°FWB) outlet water temp 7°C(44.6°F)
inlet water temp 12°C(53.6°F). Pump input is included in cooling capacity and power input based on EN14511.
*3 Amount of factory-charged refrigerant is 3(kg) × 4. Please add the refrigerant at the field.
*4 IPLV is calculated in accordance with AHRI 550-590.
*5 ESEER is calculated in accordance with EUROVENT conditions.
*Please don't use the steel material for the water piping.
*Please always make water circulate, or pull the circulation water out completely when not in use.
*Please do not use groundwater or well water in direct.
*The water circuit must be closed circuit.
*Due to continuous improvement, the above specifications may be subject to change without notice.
*This model doesn't equip with a pump.
*6 Please refer to 2-1-6. Operation temperature range.
kcal/h = kW × 860
BTU/h = kW × 3,412
lbs = kg/0.4536
cfm = m3/min × 35.31
0000005210.BOOK 6 ページ ２０１９年６月２０日 木曜日 午後３時３２分

MEES19K040
EAHV-P-YBL(-H)(-N), EACV-P-YBL(-N)
7
1. Product Specifications
Model EACV-P1800YBL(-N)(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 180.00
kcal/h 154,800
BTU/h 614,160
Power input kW 59.01
EER 3.05
IPLV *4 6.33
Water flow rate m3/h 31.0
Cooling capacity(EN14511) *2 kW 177.76
kcal/h 152,874
BTU/h 606,517
Power input kW 61.25
EER 2.90
Eurovent efficiency class B
ESEER *5 4.45
SEER 4.58
Water flow rate m3/h 31.0
Current input Cooling current 380-400-415V *1 A 77-73-70
Maximum current A 111
Water pressure drop *1 kPa 164
Temp range Cooling °C Outlet water 5~30 *6
°F Outlet water 41~86 *6
Outdoor °C -15~43 *6
°F 5~109.4 *6
Circulating water volume range m3/h 12.9~34.0
Sound pressure level (measured in anechoic room) at 1m *1 dB (A) 68
Sound power level (measured in anechoic room) *1 dB (A) 86
Diameter of water pipe Inlet mm (in) 65A (2 1/2B) housing type joint
(Standard piping) Outlet mm (in) 65A (2 1/2B) housing type joint
Diameter of water pipe Inlet mm (in) 150A (6B) housing type joint
(Inside header piping) Outlet mm (in) 150A (6B) housing type joint
External finish Polyester powder coating steel plate
External dimension H × W × D mm 2350 × 3400 × 1080
Net weight Standard piping kg (lbs) 1240 (2734)
Inside header piping kg (lbs) 1256 (2769)
Design pressure R410A MPa 4.15
Water MPa 1.0
Heat exchanger Water side Stainless steel plate and copper brazing
Air side Plate fin and copper tube
Compressor Type Inverter scroll hermetic compressor
Maker MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Quantity 4
Motor output kW 11.7 × 4
Lubricant MEL32
Fan Air flow rate m3/min 265 × 4
L/s 4417 × 4
cfm 9357 × 4
Type, Quantity Propeller fan × 4
Starting method Inverter
Motor output kW 0.92 × 4
Protection High pressure protection High pres.Sensor & High pres.Switch at 4.15MPa (601psi)
Inverter circuit Over-heat protection, Over current protection
Compressor Over-heat protection
Refrigerant Type × charge R410A × 15(kg) × 4 *3
Control LEV
Notes: Unit converter
*1 Under normal cooling conditions at outdoor temp 35°CDB/24°CWB(95°FDB/75.2°FWB) outlet water temp 7°C(44.6°F)
inlet water temp 12°C(53.6°F). Pump input is not included in cooling capacity and power input.
*2 Under normal cooling conditions at outdoor temp 35°CDB/24°CWB(95°FDB/75.2°FWB) outlet water temp 7°C(44.6°F)
inlet water temp 12°C(53.6°F). Pump input is included in cooling capacity and power input based on EN14511.
*3 Amount of factory-charged refrigerant is 3(kg) × 4. Please add the refrigerant at the field.
*4 IPLV is calculated in accordance with AHRI 550-590.
*5 ESEER is calculated in accordance with EUROVENT conditions.
*Please don't use the steel material for the water piping.
*Please always make water circulate, or pull the circulation water out completely when not in use.
*Please do not use groundwater or well water in direct.
*The water circuit must be closed circuit.
*Due to continuous improvement, the above specifications may be subject to change without notice.
*This model doesn't equip with a pump.
*6 Please refer to 2-1-6. Operation temperature range.
kcal/h = kW × 860
BTU/h = kW × 3,412
lbs = kg/0.4536
cfm = m3/min × 35.31
0000005210.BOOK 7 ページ ２０１９年６月２０日 木曜日 午後３時３２分

MEES19K040
EAHV-P-YBL(-H)(-N), EACV-P-YBL(-N)
8
1. Product Specifications
1-2. External Dimensions
EAHV-P1500, 1800YBL(-H)(-BS)
EACV-P1500, 1800YBL(-BS)
Unit: mm
97 651
(333)
2350
(78) 704 78
860
49
277
560
59
50
780 40
900
(860)
900
900
(3400)
900
(40)
1269
250 310
220 286
676
(56) 3280 (MOUNTING PITCH) 56
100 660 (100)
1061309
100
6081088
1032
277 299 59
121 126
1080
3340 3466
220
3280 60
(60)
3400
DISCHARGE AIR
4)
5)
2 × 2-ø33 HOLE
PLATE SUSPENSION FITTINGS
SURFACES TOUCHING THE FOUNDATION
SERVICE SPACE
(SERVICE SPACE) (SERVICE SPACE)
INSTALLATION ON FOUNDATION
1. SECURELY FIX THE UNIT WITH BOLTS TO KEEP THE UNIT FROM FALLING DOWN DURING EARTHQUAKES. 2. INSTALL THE UNIT ON A FOUNDATION MADE OF CONCRETE OR IRON. 3. NOISE AND VIBRATIONS FROM THE UNIT MAY BE TRANSMITTED THROUGH THE FLOOR AND WALLS. PROVIDE ADEQUATE PROTECTION AGAINST NOISE AND VIBRATION. 4. ANCHOR BOLTS SHOULD BE PREPARED ON SITE. 5. WHEN BUILDING THE FOUNDATION, TAKE THE FLOOR STRENGTH, AND PIPING AND WIRING ROUTES INTO CONSIDERATION.
SERVICE SPACES AROUND THE UNIT
1. WHEN INSTALLING THE UNIT, BE SURE TO LEAVE A SERVICE SPACE
FOR MAINTENANCE AND INSPECTION AROUND THE UNIT.
2. ENSURE THAT THERE ARE NOT ANY WALLS OR OTHER OBJECTS AROUND
THE UNIT THAT PREVENT THE UNIT FROM DRAWING IN AIR.
PRESSURE
DISPLAY
1)
2)
3)
6)
* SECTION SHOWS THE UNIT SURFACE TOUCHING THE FOUNDATION.
(MOUNTING PITCH)
DRAIN OPENING 3-ø50
4) FOR POWER CABLE
DRAWN IN FROM BOTTOM
6) FOR SIGNAL CABLE
DRAWN IN FROM BOTTOM
5) FOR SIGNAL CABLE
DRAWN IN FROM BOTTOM
4-ø20 HOLE
FOUNDATION
FOUNDATION
FOUNDATION
DO NOT BLOCK DRAIN OPENING
ANCHOR BOLT SIZE: M16
INTAKE AIR INTAKE AIR
UNIT
ANCHOR BOLT HOLE
(BOTH OF FRONT
ANCHOR BOLT HOLE
AND REAR)
(BOTH OF FRONT
AND REAR)
NO. NAME DESCRIPTION
1)
COOL (HOT) WATER INLET
21/2B HOUSING TYPE JOINT ATTACHED (× 1)
2)
COOL (HOT)WATER OUTLET
21/2B OUSING TYPE JOINT ATTACHED (× 1)
3)
DRAIN OPENING R11/2 EXTERNAL THREAD
4)
POWER CABLE INLET
ø66 × 1
5)
SIGNAL CABLE INLET (LOW CURRENT CABLE)
ø34
6)
SIGNAL CABLE INLET (HIGH CURRENT CABLE)
ø34
NOTE 1. CONNECT COOL (HOT) WATER PIPES WHILE MAKING SURE OF CONNECTING THE INLETS AND OUTLETS CORRECTLY. NOTE 2. INTRUSION OF FOREIGN MATERIALS INTO THE HEAT EXCHANGER MAY CAUSE PERFORMANCE DEGRADATION OR FREEZING.
BE SURE TO INSTALL CLEANABLE STRAINER (20 MESH MIN.) TO THE INLET OF COOL (HOT) WATER PIPES.
NOTE 3. FOR HOW TO DRAW IN POWER CABLES OR CONNECT COOL (HOT) WATER PIPES, REFER TO THE SEPARATE DOCUMENT. NOTE 4. THE HOUSING TYPE JOINTS FOR CONNECTING A COOL (HOT) WATER INLET AND OUTLET SHOULD BE PREPARED ON SITE.
THE SPECIFICATION OF THE PRODUCT IS FOR THE IMPROVEMENT A PREVIOUS NOTICE AND MIGHT CHANGE.
<STANDARD PIPING TYPE>
0000005210.BOOK 8 ページ ２０１９年６月２０日 木曜日 午後３時３２分

MEES19K040
EAHV-P-YBL(-H)(-N), EACV-P-YBL(-N)
9
1. Product Specifications
EAHV-P1500, 1800YBL(-H)(-BS)
EACV-P1500, 1800YBL(-BS)
Unit: mm
4)
5) 1)
2)
3)
4)
5)
4)
5)
B × 4-ø 33
HOLE
PRESSURE
DISPLAY
1)
2)
3)
1)
2)
3)
6)
6) 6)
INTAKE AIR INTAKE AIR
ANCHOR BOLT HOLE
DISCHARGE AIR
PLATE SUSPENSION FITTINGS
(CLEARANCE
BETWEEN MODULES) (CLEARANCE
BETWEEN MODULES)
(BOTH OF FRONT AND REAR)
ANCHOR BOLT HOLE
(BOTH OF FRONT AND REAR)
NOTE 1. CONNECT COOL (HOT) WATER PIPES WHILE MAKING SURE OF CONNECTING <CONNECTED MODULES>
THE INLETS AND OUTLETS CORRECTLY.
NOTE 2. INTRUSION OF FOREIGN MATERIALS INTO THE HEAT EXCHANGER MAY CAUSE
PERFORMANCE DEGRADATION OR FREEZING. BE SURE TO INSTALL CLEANABLE STRAINER (20 MESH MIN.) TO THE INLET OF COOL (HOT) WATER PIPES.
NOTE 3. FOR HOW TO DRAW IN POWER CABLES OR CONNECT COOL (HOT) WATER PIPES,
REFER TO THE SEPARATE DOCUMENT.
NOTE 4. THE HOUSING TYPE JOINTS FOR CONNECTING A COOL (HOT) WATER INLET AND
OUTLET SHOULD BE PREPARED ON SITE.
NOTE 5. THE VALUES OF A TO C IN THE FIGURE ARE AS FOLLOWS.
MODULE
COUNT A
B
(HANGING
HOLE COUNT)
C
(FOUNDATION
HOLE COUNT)
1 MODULE 1080 1 1
2 MODULES 2210 2 2 3 MODULES 3340 3 3 4 MODULES 4470 4 4 5 MODULES 5600 5 5 6 MODULES 6730 6 6 7 MODULES 7860 7 7 8 MODULES 8990 8 8 9 MODULES 10120 9 9
10 MODULES 11250 10 10
11 MODULES 12380 11 11
12 MODULES 13510 12 12
NO. NAME DESCRIPTION
1)
COOL (HOT) WATER INLET 21/2B HOUSING TYPE JOINT ATTACHED
21/2B HOUSING TYPE JOINT ATTACHED
2)
COOL (HOT) WATER OUTLET
3)
DRAIN OPENING R11/2 EXTERNAL THREAD
4)
POWER CABLE INLET ø66 × 1
5)
SIGNAL CABLE INLET (LOW CURRENT CABLE) ø34
6)
SIGNAL CABLE INLET (HIGH CURRENT CABLE) ø34
THE SPECIFICATION OF THE PRODUCT IS FOR THE IMPROVEMENT A PREVIOUS NOTICE AND MIGHT CHANGE.
704
860
277
560
59
780
704
860
59
780
(78) 704
860
59
50
780
(40)
270 270
11301130
1071 1071
350 350
426426
97 651
2350
78 40
1269
(60)
3400
49
250 310
220 286
676
310 310820 820
220
60
108010801080
3340
5050
3466
A
3280
(333)
0000005210.BOOK 9 ページ ２０１９年６月２０日 木曜日 午後３時３２分