Mitsubishi Electric FX-232AWC-H User manual

FX-232AWC-H FX MITSUBISHI PLC CABLE USER MANUAL
This manual describes the part names, dimensions, mounting, and
specifications of the product. Before use, read this manual and manuals of
relevant products fully to acquire proficiency in handling and operating the
product. Make sure to learn all the product information, safety information, and
precautions.
And, store this manual in a safe place so that you can take it out and read it
whenever necessary.
1. Outline
The FX-232AWC-H is a RS-422/RS-232C converter to connect the FX series
PLC with a personal computer.
1.1Package:
1 FX-232AWC-H type interface unit
1.2 External Dimensions and Part Names
2. Specification
• Use the product in the environment within the general specifications
described in PLC main unit manual (Hardware Edition).
Never use the product in areas with dust, oily smoke, conductive dusts,
corrosive gas (salt air, Cl2, H2S, NH3, SO2, or NO2), flammable gas,
vibrations or impacts, or expose it to high temperature, condensation, or wind
and rain.
If the product is used in such a place described above, electrical shock, fire,
malfunction, damage, or deterioration may be caused.
• Do not disassemble or modify the unit.
Doing so may cause failure, malfunction or fire.
• Since the FX-232AWC-H case is made of resin, do not drop it or do not exert
www.buyplccable.com
www.chinaplccable.com

strong impact.
Doing so may cause damage.
• During transportation avoid any impact as the product is a precision
instrument.
Check the operation of the product after transportation.
2.2 Electrical Specification
3. System Configuration
3.1 Connected equipment and connected cable
1) Cable for PLC connection
Select the cable depending on the connected PLC (The positioning units and
the programmable cam switch are included)
www.buyplccable.com

*1 FX1 / FX1NC / FX3UC Series PLC specification details for I/O, wiring,
installation, and maintenance can only be found in the Japanese Manual.
*2 The cables are sold separately.
2) Cable for personal computer connection
Select the cable according to the shape of the RS-232C connector of the
personal computer used.
- 9-Pin D-Sub: F2-232CAB-1
- 14-Pin Half pitch: F2-232CAB-2
- 25-Pin D-Sub: F2-232CAB
• The cable is sold separately..
4. Connecting Procedure
1) Turn OFF the power supply of the PLC.
2) Remove the connector cover of the FX-232AWC-H.
3) Connect the cables to the connectors of the FX-232AWC-H.
(Select the cable referring to "3. System Configuration")
4) Fix the connector of the FX-232AWC-H and the connected cable with the
fixing
screws.
5) Turn on the power supply of the PLC.
6) Turn on the power supply of the Personal computer.
7) Make sure the POWER Lamp of the FX-232AWC-H is lit.
(The POWER Lamp of the FX-232AWC-H lights when the power supply is
normally supplied by the PLC)
8)When the FX-232AWC-H is not in use, reattach the connector cover to
prevent
dust from entering.
5. Troubleshooting
When it is not possible to communicate between the PLC (The positioning
units and the programmable cam switch are included.) and the personal
computer via the FX-232AWC-H, check the following depending on the status
of the POWER Lamp of the FX-232AWC-H.
www.buyplccable.com
www.chinaplccable.com

_Note Concerning the CE Marking_
The CE marking does not guarantee that an entire mechanical module
produced in accordance with the contents of the notification comply with the
following standards.
Compliance to EMC standards of the entire mechanical module should be
checked by the user / manufacturer.
Standards with which this product complies
Type: Programmable Controller (Open Type Equipment)
Models: Products manufactured from July 1st, 2004.
Notes for compliance to the EMC regulation.
It is necessary to install the FX-232AWC-H module in a shielded metal control
www.buyplccable.com
www.chinaplccable.com

panel.
For more details please contact the local Mitsubishi Electric sales site.
Customer Service:
Marshall
Webeite:www.chinaplccable.com
E-Mail: [email protected]
MSN: [email protected]
skype: chinaplccable.com
yahoo: [email protected]
If any problems, please feel free to contact us!
www.buyplccable.com
www.chinaplccable.com