Mitsubishi Heavy Industries FDT90VNPWVH Product guide

(Split system, air to air heat pump type)
Manual No.'19・PAC-DB-333
STANDARD INVERTER PACKAGED
AIR-CONDITIONERS
DATA BOOK
CEILINING CASSETTE-4 WAY TYPE
FDT90VNPWVH
100VNPWVH
DUCT CONNECTED-LOW/MIDDLE
STATIC PRESSURE TYPE
FDUM90VNPWVH
100VNPWVH
WALL MOUNTED TYPE
SRK100VNPWZR
DUCT CONNECTED-HIGH STATIC
PRESSURE TYPE
FDU90VNPWVH
100VNPWVH
CEILING SUSPENDED TYPE
FDE90VNPWVH
100VNPWVH

'19 • PAC-DB-333
1. SPECIFICATIONS .............................................................................................. 3
CONTENTS
(4) Ceiling suspended type (FDE) ..................................................................
(1) Ceiling cassette-4 way type (FDT)............................................................ 3
(2) Ceiling suspended type (FDE) ..................................................................
(1) Ceiling cassette-4 way type (FDT).......................................
(3) Duct connected-Low / Middle static pressure type (FDUM)......................
(2) Duct connected-High static pressure type (FDU) .....................................
(2) Duct connected-Low / Middle static pressure type (FDUM) ....................
(1) Duct connected-High static pressure type (FDU) ....................................
(5)
Wall mounted type (SRK) ......................................................................... 11
(3) Remote control (Option parts) .................................................................
2.
EXTERIOR DIMENSIONS ..................................................................................
(1) Indoor units ..............................................................................................
(2) Outdoor units ..........................................................................................
3.
ELECTRICAL WIRING .......................................................................................
4.
NOISE LEVEL ....................................................................................................
5.
CHARACTERISTICS OF FAN ...........................................................................
6.
TEMPERATURE AND VELOCITY DISTRIBUTION ..........................................
7.
PIPING SYSTEM ................................................................................................
8.
RANGE OF USAGE & LIMITATIONS ................................................................ 36
(1) Indoor units ..............................................................................................
(2) Outdoor units ...........................................................................................
(1) Indoor units ..............................................................................................
(2) Outdoor units ...........................................................................................
9.2 Correction of cooling and heating capacity in relation to air flow rate control (Fan speed)
9.3 Correction of cooling and heating capacity in relation to one way length of refrigerant piping
9.4 Height difference between the indoor unit and outdoor unit
................... 46
............... 46
................. 46
9.SELECTION CHART
9.1 Capacity tables ........................................................................................... 39
........................................................................................... 39
.TECHNICAL INFORMATION .............................................................................147
(1) Ceiling cassette-4 way type (FDT) ..............................................................
(4) Ceiling suspended type (FDE) ....................................................................
(5) type ( ) ............................................................................
(2) Duct connected-High static pressure type (F .....................
(3) Duct connected-Low/Middle static pressure type (FDUM) .........................
-
1
-
'19 • PAC-DB-311D
147
148
149
150
151
12
7
9
32
1
0
7
0
2
34
26
7
9
21
3
3
3
3
33
12
21
12
17
18
CONTENTS
3.1 SPECIFICATIONS ....................................................................................... 525
3.2 EXTERIOR DIMENSIONS ........................................................................... 537
(1) Indoor units .............................................................................................. 537
(2) Outdoor units ........................................................................................... 537
3.4 NOISE LEVEL
3.7 PIPING SYSTEM
3.6 TEMPERATURE AND VELOCITY DISTRIBUTION
3.3 ELECTRICAL WIRING ................................................................................ 540
3.8 RANGE OF USAGE & LIMITATIONS
(1) Indoor units .............................................................................................. 540
(2) Outdoor units ........................................................................................... 540
(3) Remote control (Option parts) ................................................................. 539
3.9 SELECTION CHART
3.9.1 Capacity tables
3.9.2
Correction of cooling and heating capacity in relation to air flow rate control (Fan speed)
3.9.3 Correction of cooling and heating capacity in relation to one way length of refrigerant piping
3.9.4 Height difference between the indoor unit and outdoor unit
10.APPLICATION DATA
10.1 Installation of indoor unit
....................................................................
47
.. .. ................................................................................ 47
..................................................................................... 550
..... 559
.... 559
.......... 97
.......... 559
............................................................................................. 544
3.5 CHARACTERISTIC OF FAN ....................................................................... 545
.................................... 545
......................................................................................... 545
......................................................... 547
................................................................................... 550
3. STANDARD INVERTER PACKAGED AIR-CONDITIONERS
................................................................... 567
10.4 Installation of outdoor unit ..................................................................
90
(2) Models FDC90VNP, 90VNP1
(3) Model FDC100VNP ................................................................................. 574
10.2 Electric wiring work installation
...........................................................
74
10.3 Installation of wired remote control (Option parts) .. .. .......................
78
3.11 TECHNICAL INFORMATION ...................................................................... 581
Example: FDE 90 VNP1 VH
Series code
Applicable power source...See the specification
Product capacity
Model name FDU
: Duct connected-High static pressure type
FDUM : Duct connected-Low/Middle static pressure type
FDE
: Ceiling suspended type
FDC
: Outdoor unit
10.5 Safety precautions in handling air-conditioners with flammable refrigerants
-
1
-

'19 • PAC-DB-333
(5) Floor standing type (FDF) ......................................................................... 83
(6) Effective range of cool/hot wind (Reference) ......................................... 87
(1) FDT series ................................................................................................ 88
(2) FDU series ................................................................................................ 92
(3) FDUM, FDE series ................................................................................... 96
(4) FDF series ................................................................................................100
10.4 Installation of outdoor unit ........................................................................116
10.2 Electric wiring work installation ................................................................ 88
10.3 Installation of wired remote control (Option parts) .................................104
11. OPTION PARTS
11.1 Wireless kit ..................................................................................................100
(1) FDT series (RCN-T-5AW-E2)......................................................................100
(3) FDE series (RCN-E-E3) ............................................................................116
(2) FDU, FDUM series (RCN-KIT4-E2) ..........................................................108
.................................................................................................100
■ How to read the model name
FDT : Ceiling cassette-4 way type
FDU
: Duct connected-High static pressure type
FDUM
: Duct connected-Low/Middle static pressure type
FDE
: Ceiling suspended type
FDF : Floor standing type
FDC
: Outdoor unit
Example: FDT 90 VNP1
VG
Series code
Applicable power source...See the specification
Product capacity
Model name
12. TECHNICAL INFORMATION .............................................................................187
(1) Ceiling cassette-4 way type (FDT) ................................................................187
(4) Ceiling suspended type (FDE) ......................................................................193
(5) Floor standing type (FDF) .............................................................................195
(2) Duct connected-High static pressure type (FDU) .........................................189
(3) Duct connected-Low/Middle static pressure type (FDUM) ...........................191
(3) FDE series (LB-E) .....................................................................................134
(2) FDU, FDUM series (LB-KIT)
......................................................................128
(4) User’s manual ...........................................................................................138
11.2 Motion sensor kit ........................................................................................124
(1) FDT series (LB-T-5W-E) ........................................................................124
11.4 Filter kit (FDUM series) ...............................................................................146
11.5 Interface kit (SC-BIKN2-E) ..........................................................................148
11.6 Superlink E board (SC-ADNA-E)................................................................152
11.3 Simple wired remote control (RCH-E3) .....................................................140
1. SPECIFICATIONS .............................................................................................. 3
CONTENTS
(4) Ceiling suspended type (FDE) ..................................................................
(1) Ceiling cassette-4 way type (FDT)............................................................ 3
(2) Ceiling suspended type (FDE) ..................................................................
(1) Ceiling cassette-4 way type (FDT).......................................
(3) Duct connected-Low / Middle static pressure type (FDUM)......................
(2) Duct connected-High static pressure type (FDU) .....................................
(2) Duct connected-Low / Middle static pressure type (FDUM) .................... 7
(1) Duct connected-High static pressure type (FDU) .................................... 6
(5)
Wall mounted type (SRK) ......................................................................... 7
(3) Remote control (Option parts) .................................................................
2.
EXTERIOR DIMENSIONS .................................................................................. 8
(1) Indoor units ..............................................................................................
(2) Outdoor units ..........................................................................................
3.
ELECTRICAL WIRING .......................................................................................
4.
NOISE LEVEL .................................................................................................... 3
5.
CHARACTERISTICS OF FAN ...........................................................................
6.
TEMPERATURE AND VELOCITY DISTRIBUTION .......................................... 8
7.
PIPING SYSTEM ................................................................................................ 30
8.
RANGE OF USAGE & LIMITATIONS ................................................................ 32
(1) Indoor units ..............................................................................................
(2) Outdoor units ........................................................................................... 2
(1) Indoor units .............................................................................................. 3
(2) Outdoor units ........................................................................................... 5
9.2 Correction of cooling and heating capacity in relation to air flow rate control (Fan speed)
9.3 Correction of cooling and heating capacity in relation to one way length of refrigerant piping
9.4 Height difference between the indoor unit and outdoor unit
................... 39
............... 39
................. 39
9.SELECTION CHART
9.1 Capacity tables ........................................................................................... 35
........................................................................................... 35
.TECHNICAL INFORMATION .............................................................................154
(1) Ceiling cassette-4 way type (FDT) ..............................................................
(4) Ceiling suspended type (FDE) ....................................................................
(5) type ( ) ............................................................................
(2) Duct connected-High static pressure type (F .....................
(3) Duct connected-Low/Middle static pressure type (FDUM) .........................
-
1
-
'19 • PAC-DB-311D
154
156
158
160
162
12
- -
FDT : Ceiling cassette-4 way type
FDU
: Duct connected-High static pressure type
FDUM
: Duct connected-Low/Middle static pressure type
FDE
: Ceiling suspended type
SRK : Wall mounted type
FDC
: Outdoor unit
■How to read the model name
Example: FDT VNP V
Series code
Applicable power source...See the specification
Product capacity
Model name
(4) Ceiling suspended type (FDE) ......................................................................193
(5) Floor standing type (FDF) .............................................................................195
(2) Duct connected-High static pressure type (FDU)
.........................................189
(3) Duct connected-Low/Middle static pressure type (FDUM) ...........................191
'19 • PAC-DB-311D
90
-
2
-

'19 • PAC-DB-333
Model
Item
FDT90VNPWVH
Indoor unit FDT100VH Outdoor unit FDC90VNP-W
Power source 1 Phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 9.0 [ 2.1(Min.) - 9.5(Max.)]
Nominal heating capacity (range) kW 9.0 [ 1.7(Min.) - 9.5(Max.)]
Power consumption Cooling
kW
2.48
Heating 1.90
Max power consumption 4.46
Running current Cooling
A
11.0/11.5
Heating 8.4/8.8
Inrush current, max current 5, 19
Power factor Cooling %98/98
Heating 98/98
EER Cooling 3.63
COP Heating 4.74
Sound power level Cooling
dB(A)
62 67
Heating 66
Sound pressure level Cooling P-Hi: 47 Hi: 39 Me: 36 Lo: 30 55
Heating P-Hi: 47 Hi: 39 Me: 36 Lo: 29 53
Silent mode
sound pressure level
Cooling —52
Heating 50
Exterior dimensions (Height x Width x Depth) mm Unit 298 × 840 × 840
Panel 35 × 950 × 950 750 × 880(+88) × 340
Exterior appearance
(Munsell color)
(RAL color)
Plaster white
(6.8Y8.9/0.2) near equivalent
(RAL 9003) near equivalent
Stucco white
(4.2Y7.5/1.1) near equivalent
(RAL 7044) near equivalent
Net weight kg Unit 25 Panel 5 57
Compressor type & Q'ty — RMT5118SWP1 ( Twin rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) L — 0.675 ( DIAMOND FREEZE MB75 )
Refrigerant (Type, amount, pre-charge length) kg R32 1.7 in outdoor unit (Incl. the amount for the piping of 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Electronic expansion valve
Fan type & Q'ty Turbo fan ×1 Propeller fan ×1
Fan motor (Starting method) W 140 < Direct line start > 86 < Direct line start >
Air flow Cooling m3/min P-Hi: 37 Hi: 26 Me: 23 Lo: 17 59
Heating 55
Available external static pressure Pa 0 —
Outside air intake Possible —
Air filter, Quality / Quantity Pocket plastic net ×1 (Washable) —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W — —
Operation
control
Remote control (Option) Wired : RC-EX3A , RC-E5 , RCH-E3 Wireless : RCN-T-5AW-E2
Room temperature control Thermostat by electronics
Operation display —
Safety equipments
Compressor overheat protection, Overcurrent protection
Frost protection, Serial signal error protection, Indoor fan motor error protection
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size (O.D) mm I/U φ9.52 (3/8") Pipe φ6.35(1/4")x0.8 O/U φ6.35 (1/4")
φ15.88 (5/8") φ15.88(5/8")x1.0 φ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m — —
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between
O
/U and I/U m Max.20 (Outdoor unit is higher) / Max.20 (Outdoor unit is lower)
Drain hose
Hose connectable with VP25(O.D.32) Hole size
φ
20 x 4 pcs
Drain pump, max lift height mm Built-in drain pump , 850 —
Recommended breaker size A —
L.R.A. (Locked rotor ampere) A 5.0
Interconnecting wires Size x Core number 1.5mm2ｘ 4 cores（Including earth cable）/ Termainal block（Screw xing type）
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts Motion sensor : LB-T-5W-E
PJF000Z589 H
(1) Ceiling cassette-4 way type (FDT)
The pipe length is 7.5m.
Notes (1) The data are measured at the following conditions.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) The operation data indicate when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
Item
Operation
Indoor air temperature Outdoor air temperature Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C ISO5151-T1
Heating 20˚C — 7˚C 6˚C ISO5151-H1
1. SPECIFICATIONS
-
3
-

'19 • PAC-DB-333
Model
Item
FDT100VNPWVH
Indoor unit FDT100VH Outdoor unit FDC100VNP-W
Power source 1 Phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 10.0 [ 2.1(Min.) - 10.2(Max.)]
Nominal heating capacity (range) kW 10.0 [ 1.7(Min.) - 10.4(Max.)]
Power consumption Cooling
kW
2.84
Heating 2.33
Max power consumption 4.46
Running current Cooling
A
12.1/12.7
Heating 9.9/10.4
Inrush current, max current 5, 19
Power factor Cooling %98/98
Heating 98/98
EER Cooling 3.52
COP Heating 4.29
Sound power level Cooling
dB(A)
62 68
Heating 67
Sound pressure level Cooling P-Hi: 47 Hi: 39 Me: 36 Lo: 30 56
Heating P-Hi: 47 Hi: 39 Me: 36 Lo: 29 54
Silent mode
sound pressure level
Cooling —52
Heating 50
Exterior dimensions (Height x Width x Depth) mm Unit 298 × 840 × 840
Panel 35 × 950 × 950 750 × 880(+88) × 340
Exterior appearance
(Munsell color)
(RAL color)
Plaster white
(6.8Y8.9/0.2) near equivalent
(RAL 9003) near equivalent
Stucco white
(4.2Y7.5/1.1) near equivalent
(RAL 7044) near equivalent
Net weight kg Unit 25 Panel 5 57
Compressor type & Q'ty — RMT5118SWP1 ( Twin rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) L — 0.675 ( DIAMOND FREEZE MB75 )
Refrigerant (Type, amount, pre-charge length) kg R32 1.7 in outdoor unit (Incl. the amount for the piping of 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Electronic expansion valve
Fan type & Q'ty Turbo fan ×1 Propeller fan ×1
Fan motor (Starting method) W 140 < Direct line start > 86 < Direct line start >
Air flow Cooling m3/min P-Hi: 37 Hi: 26 Me: 23 Lo: 17 63
Heating 55
Available external static pressure Pa 0 —
Outside air intake Possible —
Air filter, Quality / Quantity Pocket plastic net ×1 (Washable) —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W — —
Operation
control
Remote control (Option) Wired : RC-EX3A , RC-E5 , RCH-E3 Wireless : RCN-T-5AW-E2
Room temperature control Thermostat by electronics
Operation display —
Safety equipments
Compressor overheat protection, Overcurrent protection
Frost protection, Serial signal error protection, Indoor fan motor error protection
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size (O.D) mm I/U φ9.52 (3/8") Pipe φ6.35(1/4")x0.8 O/U φ6.35 (1/4")
φ15.88 (5/8") φ15.88(5/8")x1.0 φ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m — —
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between
O
/U and I/U m Max.20 (Outdoor unit is higher) / Max.20 (Outdoor unit is lower)
Drain hose
Hose connectable with VP25(O.D.32) Hole size
φ
20 x 4 pcs
Drain pump, max lift height mm Built-in drain pump , 850 —
Recommended breaker size A —
L.R.A. (Locked rotor ampere) A 5.0
Interconnecting wires Size x Core number 1.5mm2ｘ 4 cores（Including earth cable）/ Termainal block（Screw xing type）
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts Motion sensor : LB-T-5W-E
PJF000Z589 H
The pipe length is 7.5m.
Notes (1) The data are measured at the following conditions.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) The operation data indicate when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
Item
Operation
Indoor air temperature Outdoor air temperature Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C ISO5151-T1
Heating 20˚C — 7˚C 6˚C ISO5151-H1
-
4
-

'19 • PAC-DB-333
Model
Item
FDU90VNPWVH
Indoor unit FDU100VH Outdoor unit FDC90VNP-W
Power source 1 Phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 9.0 [ 2.1(Min.) - 9.5(Max.)]
Nominal heating capacity (range) kW 9.0 [ 1.7(Min.) - 9.5(Max.)]
Power consumption Cooling
kW
2.62
Heating 1.98
Max power consumption 4.46
Running current Cooling
A
11.6/12.2
Heating 8.8/9.2
Inrush current, max current 5, 19
Power factor Cooling %98/98
Heating 98/98
EER Cooling 3.44
COP Heating 4.55
Sound power level Cooling
dB(A)
65 67
Heating 66
Sound pressure level Cooling P-Hi: 44 Hi: 38 Me: 36 Lo: 30 55
Heating 53
Silent mode
sound pressure level
Cooling —52
Heating 50
Exterior dimensions (Height x Width x Depth) mm 280 × 1,370 × 740 750 × 880(+88) × 340
Exterior appearance
(Munsell color)
(RAL color)
—
Stucco white
(4.2Y7.5/1.1) near equivalent
(RAL 7044) near equivalent
Net weight kg 54 57
Compressor type & Q'ty — RMT5118SWP1 ( Twin rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) L — 0.675 ( DIAMOND FREEZE MB75 )
Refrigerant (Type, amount, pre-charge length) kg R32 1.7 in outdoor unit (Incl. the amount for the piping of 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Electronic expansion valve
Fan type & Q'ty Centrifugal fan ×3 Propeller fan ×1
Fan motor (Starting method) W 100 + 130 < Direct line start > 86 < Direct line start >
Air flow Cooling m3/min P-Hi: 36 Hi: 28 Me: 25 Lo: 19 59
Heating 55
Available external static pressure Pa Standard : 60 Max : 200 —
Outside air intake Possible —
Air filter, Quality / Quantity Procure locally —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W — —
Operation
control
Remote control (Option) Wired : RC-EX3A,RC-E5,RCH-E3 Wireless : RCN-KIT4-E2
Room temperature control Thermostat by electronics
Operation display —
Safety equipments
Compressor overheat protection, Overcurrent protection
Frost protection, Serial signal error protection, Indoor fan motor error protection
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size (O.D) Liquid line mm I/U φ9.52 (3/8") Pipe φ6.35(1/4")x0.8 O/U φ6.35 (1/4")
Gas line φ15.88 (5/8") Pipe φ15.88(5/8")x1.0 φ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m — —
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between
O
/U and I/U m Max.20 (Outdoor unit is higher) / Max.20 (Outdoor unit is lower)
Drain hose
Hose connectable VP25(I.D.25, O.D.32) Hole size
φ
20 x 4 pcs
Drain pump, max lift height mm Built-in drain pump , 600 —
Recommended breaker size A —
L.R.A. (Locked rotor ampere) A 5
Interconnecting wires Size x Core number 1.5mm2ｘ 4 cores（Including earth cable）/ Termainal block（Screw xing type）
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts Motion sensor : LB-KIT
PJG000Z625 H
(2) Duct connected - High static pressure type (FDU)
Notes (1) The data are measured at the following conditions.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicate when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
(7) The factory E.S.P. setting is set within the range of 80 - 150 Pa.If SW8-4 is turned to "ON",
E.S.P. setting range can be changed to 10 - 200 Pa.(For RC-EX3A and RC-E5 only)
Item
Operation
Indoor air temperature Outdoor air temperature External static pressure
of indoor unit Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C 60Pa ISO5151-T1
Heating 20˚C — 7˚C 6˚C ISO5151-H1
The pipe length is 7.5m.
-
5
-

'19 • PAC-DB-333
Model
Item
FDU100VNPWVH
Indoor unit FDU100VH Outdoor unit FDC100VNP-W
Power source 1 Phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 10.0 [ 2.1(Min.) - 10.2(Max.)]
Nominal heating capacity (range) kW 10.0 [ 1.7(Min.) - 10.4(Max.)]
Power consumption Cooling
kW
3.08
Heating 2.45
Max power consumption 4.46
Running current Cooling
A
13.1/13.7
Heating 10.4/10.9
Inrush current, max current 5, 19
Power factor Cooling %98/98
Heating 98/98
EER Cooling 3.25
COP Heating 4.08
Sound power level Cooling
dB(A)
65 68
Heating 67
Sound pressure level Cooling P-Hi: 44 Hi: 38 Me: 36 Lo: 30 56
Heating 54
Silent mode
sound pressure level
Cooling —52
Heating 50
Exterior dimensions (Height x Width x Depth) mm 280 × 1,370 × 740 750 × 880(+88) × 340
Exterior appearance
(Munsell color)
(RAL color)
—
Stucco white
(4.2Y7.5/1.1) near equivalent
(RAL 7044) near equivalent
Net weight kg 54 57
Compressor type & Q'ty — RMT5118SWP1 ( Twin rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) L — 0.675 ( DIAMOND FREEZE MB75 )
Refrigerant (Type, amount, pre-charge length) kg R32 1.7 in outdoor unit (Incl. the amount for the piping of 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Electronic expansion valve
Fan type & Q'ty Centrifugal fan ×3 Propeller fan ×1
Fan motor (Starting method) W 100 + 130 < Direct line start > 86 < Direct line start >
Air flow Cooling m3/min P-Hi: 36 Hi: 28 Me: 25 Lo: 19 63
Heating 55
Available external static pressure Pa Standard : 60 Max : 200 —
Outside air intake Possible —
Air filter, Quality / Quantity Procure locally —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W — —
Operation
control
Remote control (Option) Wired : RC-EX3A,RC-E5,RCH-E3 Wireless : RCN-KIT4-E2
Room temperature control Thermostat by electronics
Operation display —
Safety equipments
Compressor overheat protection, Overcurrent protection
Frost protection, Serial signal error protection, Indoor fan motor error protection
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size (O.D) Liquid line mm I/U φ9.52 (3/8") Pipe φ6.35(1/4")x0.8 O/U φ6.35 (1/4")
Gas line φ15.88 (5/8") Pipe φ15.88(5/8")x1.0 φ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m — —
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between
O
/U and I/U m Max.20 (Outdoor unit is higher) / Max.20 (Outdoor unit is lower)
Drain hose
Hose connectable VP25(I.D.25, O.D.32) Hole size
φ
20 x 4 pcs
Drain pump, max lift height mm Built-in drain pump , 600 —
Recommended breaker size A —
L.R.A. (Locked rotor ampere) A 5
Interconnecting wires Size x Core number 1.5mm2ｘ 4 cores（Including earth cable）/ Termainal block（Screw xing type）
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts Motion sensor : LB-KIT
PJG000Z625 H
Notes (1) The data are measured at the following conditions.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicate when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
(7) The factory E.S.P. setting is set within the range of 80 - 150 Pa.If SW8-4 is turned to "ON",
E.S.P. setting range can be changed to 10 - 200 Pa.(For RC-EX3A and RC-E5 only)
Item
Operation
Indoor air temperature Outdoor air temperature External static pressure
of indoor unit Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C 60Pa ISO5151-T1
Heating 20˚C — 7˚C 6˚C ISO5151-H1
The pipe length is 7.5m.
-
6
-

'19 • PAC-DB-333
Model
Item
FDUM90VNPWVH
Indoor unit FDUM100VH Outdoor unit FDC90VNP-W
Power source 1 Phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 9.0 [ 2.1(Min.) - 9.5(Max.)]
Nominal heating capacity (range) kW 9.0 [ 1.7(Min.) - 9.5(Max.)]
Power consumption Cooling
kW
2.62
Heating 1.98
Max power consumption 4.46
Running current Cooling
A
11.6/12.2
Heating 8.8/9.2
Inrush current, max current 5, 19
Power factor Cooling %98/98
Heating 98/98
EER Cooling 3.44
COP Heating 4.55
Sound power level Cooling
dB(A)
65 67
Heating 66
Sound pressure level Cooling P-Hi: 44 Hi: 38 Me: 36 Lo: 30 55
Heating 53
Silent mode
sound pressure level
Cooling —52
Heating 50
Exterior dimensions (Height x Width x Depth) mm 280 × 1,370 × 740 750 × 880(+88) × 340
Exterior appearance
(Munsell color)
(RAL color)
—
Stucco white
(4.2Y7.5/1.1) near equivalent
(RAL 7044) near equivalent
Net weight kg 54 57
Compressor type & Q'ty — RMT5118SWP1 ( Twin rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) L — 0.675 ( DIAMOND FREEZE MB75 )
Refrigerant (Type, amount, pre-charge length) kg R32 1.7 in outdoor unit (Incl. the amount for the piping of 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Electronic expansion valve
Fan type & Q'ty Centrifugal fan ×3 Propeller fan ×1
Fan motor (Starting method) W 100 + 130 < Direct line start > 86 < Direct line start >
Air flow Cooling m3/min P-Hi: 36 Hi: 28 Me: 25 Lo: 19 59
Heating 55
Available external static pressure Pa Standard : 60 Max : 100 —
Outside air intake Possible —
Air filter, Quality / Quantity Procure locally —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W — —
Operation
control
Remote control (Option) Wired : RC-EX3A,RC-E5,RCH-E3 Wireless : RCN-KIT4-E2
Room temperature control Thermostat by electronics
Operation display —
Safety equipments
Compressor overheat protection, Overcurrent protection
Frost protection, Serial signal error protection, Indoor fan motor error protection
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size (O.D) Liquid line mm I/U φ9.52 (3/8") Pipe φ6.35(1/4")x0.8 O/U φ6.35 (1/4")
Gas line φ15.88 (5/8") Pipe φ15.88(5/8")x1.0 φ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m — —
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between
O
/U and I/U m Max.20m (Outdoor unit is higher) / Max.20m (Outdoor unit is lower)
Drain hose
Hose connectable VP25(I.D.25, O.D.32) Hole size
φ
20 x 4 pcs
Drain pump, max lift height mm Built-in drain pump , 600 —
Recommended breaker size A —
L.R.A. (Locked rotor ampere) A 5
Interconnecting wires Size x Core number 1.5mm2ｘ 4 cores（Including earth cable）/ Termainal block（Screw xing type）
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts Filter set : UM-FL3EF , Motion sensor : LB-KIT
PJG000Z491 J
(3) Duct connected - Low / Middle static pressure type (FDUM)
Notes (1) The data are measured at the following conditions.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) The operation data indicate when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
(6) Static pressure of option air filter "UM-FL2EF" is 5Pa initially.
(7) The external static pressure setting can be changed to 10-100Pa. (For RC-EX3A and RC-E5 only)
Item
Operation
Indoor air temperature Outdoor air temperature External static pressure
of indoor unit Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C 60Pa ISO5151-T1
Heating 20˚C — 7˚C 6˚C ISO5151-H1
The pipe length is 7.5m.
-
7
-

'19 • PAC-DB-333
Model
Item
FDUM100VNPWVH
Indoor unit FDUM100VH Outdoor unit FDC100VNP-W
Power source 1 Phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 10.0 [ 2.1(Min.) - 10.2(Max.)]
Nominal heating capacity (range) kW 10.0 [ 1.7(Min.) - 10.4(Max.)]
Power consumption Cooling
kW
3.08
Heating 2.45
Max power consumption 4.46
Running current Cooling
A
13.1/13.7
Heating 10.4/10.9
Inrush current, max current 5, 19
Power factor Cooling %98/98
Heating 98/98
EER Cooling 3.25
COP Heating 4.08
Sound power level Cooling
dB(A)
65 68
Heating 67
Sound pressure level Cooling P-Hi: 44 Hi: 38 Me: 36 Lo: 30 56
Heating 54
Silent mode
sound pressure level
Cooling —52
Heating 50
Exterior dimensions (Height x Width x Depth) mm 280 × 1,370 × 740 750 × 880(+88) × 340
Exterior appearance
(Munsell color)
(RAL color)
—
Stucco white
(4.2Y7.5/1.1) near equivalent
(RAL 7044) near equivalent
Net weight kg 54 57
Compressor type & Q'ty — RMT5118SWP1 ( Twin rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) L — 0.675 ( DIAMOND FREEZE MB75 )
Refrigerant (Type, amount, pre-charge length) kg R32 1.7 in outdoor unit (Incl. the amount for the piping of 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Electronic expansion valve
Fan type & Q'ty Centrifugal fan ×3 Propeller fan ×1
Fan motor (Starting method) W 100 + 130 < Direct line start > 86 < Direct line start >
Air flow Cooling m3/min P-Hi: 36 Hi: 28 Me: 25 Lo: 19 63
Heating 55
Available external static pressure Pa Standard : 60 Max : 100 —
Outside air intake Possible —
Air filter, Quality / Quantity Procure locally —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W — —
Operation
control
Remote control (Option) Wired : RC-EX3A,RC-E5,RCH-E3 Wireless : RCN-KIT4-E2
Room temperature control Thermostat by electronics
Operation display —
Safety equipments
Compressor overheat protection, Overcurrent protection
Frost protection, Serial signal error protection, Indoor fan motor error protection
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size (O.D) Liquid line mm I/U φ9.52 (3/8") Pipe φ6.35(1/4")x0.8 O/U φ6.35 (1/4")
Gas line φ15.88 (5/8") Pipe φ15.88(5/8")x1.0 φ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m — —
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between
O
/U and I/U m Max.20m (Outdoor unit is higher) / Max.20m (Outdoor unit is lower)
Drain hose
Hose connectable VP25(I.D.25, O.D.32) Hole size
φ
20 x 4 pcs
Drain pump, max lift height mm Built-in drain pump , 600 —
Recommended breaker size A —
L.R.A. (Locked rotor ampere) A 5
Interconnecting wires Size x Core number 1.5mm2ｘ 4 cores（Including earth cable）/ Termainal block（Screw xing type）
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts Filter set : UM-FL3EF , Motion sensor : LB-KIT
PJG000Z491 J
Notes (1) The data are measured at the following conditions.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) The operation data indicate when the air-conditioner is operated at 230V 50Hz or 220 V60Hz.
(6) Static pressure of option air filter "UM-FL2EF" is 5Pa initially.
(7) The external static pressure setting can be changed to 10-100Pa. (For RC-EX3A and RC-E5 only)
Item
Operation
Indoor air temperature Outdoor air temperature External static pressure
of indoor unit Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C 60Pa ISO5151-T1
Heating 20˚C — 7˚C 6˚C ISO5151-H1
The pipe length is 7.5m.
-
8
-

'19 • PAC-DB-333
(4) Ceiling suspended type (FDE)
Model
Item
FDE90VNPWVH
Indoor unit FDE100VH Outdoor unit FDC90VNP-W
Power source 1 Phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 9.0 [ 2.1(Min.) - 9.5(Max.)]
Nominal heating capacity (range) kW 9.0 [ 1.7(Min.) - 9.5(Max.)]
Power consumption Cooling
kW
2.38
Heating 1.99
Max power consumption 4.46
Running current Cooling
A
10.6/11.0
Heating 8.8/9.2
Inrush current, max current 5, 19
Power factor Cooling %98/98
Heating 98/98
EER Cooling 3.78
COP Heating 4.52
Sound power level Cooling
dB(A)
64 67
Heating 66
Sound pressure level Cooling P-Hi: 48 Hi: 43 Me: 38 Lo: 34 55
Heating 53
Silent mode
sound pressure level
Cooling —52
Heating 50
Exterior dimensions (Height x Width x Depth) mm 250 × 1,620 × 690 750 × 880(+88) × 340
Exterior appearance
(Munsell color)
(RAL color)
Plaster white
(6.8Y8.9/0.2) near equivalent
(RAL 9003) near equivalent
Stucco white
(4.2Y7.5/1.1) near equivalent
(RAL 7044) near equivalent
Net weight kg 43 57
Compressor type & Q'ty — RMT5118SWP1 ( Twin rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) L — 0.675 ( DIAMOND FREEZE MB75 )
Refrigerant (Type, amount, pre-charge length) kg R32 1.7 in outdoor unit (Incl. the amount for the piping of 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Electronic expansion valve
Fan type & Q'ty Centrifugal fan ×4 Propeller fan ×1
Fan motor (Starting method) W 80 < Direct line start > 86 < Direct line start >
Air flow Cooling m3/min P-Hi: 32 Hi: 26 Me: 21 Lo: 16.5 55
Heating 55
Available external static pressure Pa 0 —
Outside air intake Not possible —
Air filter, Quality / Quantity Pocket plastic net ×2(Washable) —
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W — —
Operation
control
Remote control (Option) Wired : RC-EX3A,RC-E5,RCH-E3 Wireless : RCN-E-E3
Room temperature control Thermostat by electronics
Operation display —
Safety equipments
Compressor overheat protection, Overcurrent protection
Frost protection, Serial signal error protection, Indoor fan motor error protection
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size (O.D) Liquid line mm I/U φ9.52 (3/8") Pipe φ6.35(1/4")x0.8 O/U φ6.35 (1/4")
Gas line φ15.88 (5/8") Pipe φ15.88(5/8")x1.0 φ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m — —
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between
O
/U and I/U m Max.20m (Outdoor unit is higher) / Max.20m (Outdoor unit is lower)
Drain hose
Hose connectable with VP20(O.D.26) Hole size
φ
20 x 4 pcs
Drain pump, max lift height mm — —
Recommended breaker size A —
L.R.A. (Locked rotor ampere) A 5
Interconnecting wires Size x Core number 1.5mm2ｘ 4 cores（Including earth cable）/ Termainal block（Screw xing type）
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts Motion sensor : LB-E
PFA004Z088 H
The pipe length is 7.5m.
Notes (1) The data are measured at the following conditions.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) The operation data indicate when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
Item
Operation
Indoor air temperature Outdoor air temperature Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C ISO5151-T1
Heating 20˚C — 7˚C 6˚C ISO5151-H1
-
9
-