Mixcder ShareMe 5 User manual

User’s Manual
Wireless Headphone
MODEL:ShareMe 5

EN-1
1. Introduction
2. Package Contents
3. Product Overview
Thank you for purchasing the Mixcder ShareMe 5 Wireless
Headphone. ShareMe 5 has fashionable appearance
and eco-friendly package design. The headphone
provides foldable design for easy storage and carrying.
Artificial protein leather of earmuffs is simulated to human
skin texture, giving you a long-time comfort. Built-in
rechargeable battery provides more music playing and
standby time.
ShareMe 5 also can be used both wired and wirelessly
via Wireless 4.1 to communicate with your Wireless-
enabled device till 10 meters range. ShareMe built-in
technology allows listening to the wireless music between
2 ShareMe-equipped headphones simultaneously.
Its powerful and rich bass speaker brings you amazing
and unprecedented audio enjoyment.
Note: Please read the user’s manual carefully before
using, and keep it properly for future reference.
- Wireless headphone*1 - 3.5mm audio cable*1
- Micro USB charging cable*1 - User’s manual*1
Micro USB Charging Cable 3.5mm Audio Cable
Micro USB interface for charging
Charging LED LED Indicator
3.5mm
line-in jack
Power button
Microphone
Next track/V+
Previous track/V-

EN-2
4. Charging the Battery
5. Pairing with Wireless Devices
5-1Pairing the headphones with a computer
Before pairing the headphone with your computer, please
make sure your computer or laptop has the built-in
Wireless feature. If not, you must purchase a Wireless
dongle, preferably version 2.1 or above.
1. Make sure the headphone is off.
2. Start the Wireless program in the computer.
3. The “Search new device” screen will be displayed.
4. Do not place both devices more than one meter away
from each other.
Any Power
source for
USB use
Micro USB charging cable to
the USB Interface for charging
Connect the micro USB charging cable to any power
source and the USB interface located on the side of ear
cup for charging. The headphone LED turns to solid red
during charging. It takes about 2 hours for the first
charge and after charging for as long as 1-1.5 hours.
When the battery is fully charged the LED turns off.
You can also use the Wireless function during charging
but will extend the charging time. If you use the audio
cable or turn the headphone off for charging that will not
affect the charging time.
When the battery is low, the LED flashes red light. At the
same time the headphone also provides a low battery
warning tone.
Note: It is strongly recommended fully charging for the
first use.Playtime varies according to volume level and
audio content .

EN-3
5. Press and hold the power button on the headphone
until it powers on but don't let go just yet. Continue
holding down on the power button until you see the LED
indicator flashes blue and red alternately, which means
your headphone is in "pairing mode" waiting to be paired
with your device.
6. As soon as the computer system detects the new
device and select “Mixcder ShareMe 5". Once successfully
paired, the LED turns to solid blue. You will hear “Pairing
successful, connected”.
5-2 Pairing the headphones with a phone
1. Make sure the headphone is off.
2. Do not place both devices more than one meter away
from each other.
3.Press and hold the power button on the headphone
until it powers on but don't let go just yet. Continue
holding down on the power button until you see the LED
indicator flashes blue and red alternately, which means
your headphone is in "pairing mode"waiting to be paired
with your device.
4. Start Wireless function on your phone and search for
new devices.
5. Select the “Mixcder ShareMe 5” to pair. Once
successfully paired, the LED turns to solid blue. You will
hear “Pairing successful, connected”.
5-3 ShareMe function
The music or audio program will be shared among two
headphones and the Wireless-enabled device simultane-
ously.
1. Make sure the headphones and the connected
Wireless-enabled device are off.
2. Do not place all devices more than one meter away
from each other.
3. Press and hold the power button on one headphone
until it powers on but don't let go just yet. Continue
holding down on the power button until you see the LED
indicator flashes blue and red alternately, which means
your headphone is in "pairing mode" waiting to be paired

EN-4
5-4 Connecting to paired devices
1. Mixcder ShareMe 5 will pair with the last paired device
automatically when turning on. But for some computers
or laptops you will need to manually pair every time.
2. If you use ShareMe function to turn the primary
headphone on firstly, it will be connected to the paired
device automatically. Then turn the secondary one on,
the secondary one will automatically connect to the
primary one.
The secondary headphone The primary headphone The Wireless-enabled
device
STEP 1
Connect two headphones
to each other
STEP 2
Pair the primary headphone
to the device
either with your device or another headphone. Repeat
the same steps above (holding down the power button
for 5-6 seconds until the LED indicator flashes blue and
red alternately) on the second headphone.
4. Once both headphones are powered on and in pairing
mode, they should automatically identify each other and
connect together. This may take from a few seconds to
10 seconds. Once successfully paired, one headphone
voices “Connected, left channel” and the LED flashes
blue and red alternately, which means the primary
headphone. The other headphone voices “Connected,
right channel” and the LED turns to solid blue, which
means secondary headphone.
5. Start Wireless function of the device and select the
“Mixcder ShareMe 5” to pair the primary headphone.
6. Once successfully paired, the LED turns to solid blue.
You will hear “Second device connected”.

EN-5
3. Conversely, if you use ShareMe function to turn the
secondary headphone on firstly, it will be connected to
the paired device automatically. Then turn the primary
one on, the secondary one will disconnect to the paired
device and transfer the connection to the primary one
automatically. The primary one will connect to the paired
device directly.
The secondary headphone
The primary headphone The Wireless-enabled device
Connected firstly
Connected next
The secondady headphone
Connected firstly
The primary headphone
The Wireless-enabled
device
Connected next Connected firstly
Disconnected

EN-6
6. Making and Answering a Call
Note: There will be a prompt voice when first pairing.
7. Using a Wired Headphone
The ShareMe 5 provides a 3.5mm audio jack located on
the side of ear cup and an included audio cable for wired
use. This allows you to use the audio function with other
devices without having wireless function. When the
headphone's battery is low, you can still enjoy the music
without worrying battery dead.
Note: The microphone can't work when using as wired
headphone.
6-1 Making a call
1. Make sure the headphone is pairing to the mobile
phone. Dial through the mobile phone and press the call
button on the phone.
2. To end a call, press the power button once again or
also end the call directly by the phone.
6-2 Answering a call
Make sure the Headphone is pairing with your phone.
Please refer to chapter 5. Pairing with Wireless devices.
1. When a call is incoming. The LED flashes red twice
every second.
2. Press the power button on your headphone or the
answer button on your phone to answer the call. If there
is the music playback, it will pause.
3. To end a call, press the power button once again or
also end the call directly by the phone.
4. As soon as the call is ended, the music will continue to
play automatically.
Note:
- The microphone can't work when using as wired
headphone.
- Only the primary headphone can answer the call when
using ShareMe function.

EN-7
Using as a wired headphone with a 3.5mm audio cable
9. Protecting your Hearing
The Headphone is held close to your ears, so loud
8. Take Care Your Headphone
- Store the Headphone with power off and in a dry
environment.
- If you don’t use the headphone for a long period,
charging the battery every 2 months for 1-2 hours.
- Use a dry cloth for cleaning if needed.
- Avoid dropping the headphone from high places or on
hard surfaces.
- Avoid exposing the headphone to extreme temperature.
(Recommended Storage temperature is -40˚C-80˚C.)
- The headphone is NOT waterproof. Avoid exposing the
headphone to rain or getting liquids into any button port
or other openings.
- Please don’t twist or bend the headphone. This may
cause permanent deformation.
- The built-in battery can’t be disposed in the fire to avoid
explosion.
Avoid exposing to
liquids and rain
Avoid exposing to
extremely temperature
Avoid dropping
from high places

EN-8
Function Operation
Power on
Press and hold the power button 3 seconds. And
the LED flashes blue and sounds “Power on”.
Then flashes blue every second.
Power off Press and hold the power button 5 seconds. And
the LED flashes red and sounds “Power off”.
Increase volume Press the Volume Up V+ button
Decrease volume Press the Volume Down V- button
Play media Press the power button
Pause/restart media
playback Press the power button
Skip to next track Press and hold the V+ button for 1-2s
Skip to previous track Press and hold the V- button for 1-2s
10. Control Instructions
Note:
- ShareMe 5 will pair with the last paired device
automatically when turned on. But for some computers
or laptops you will need to manually pair every time.
- There will be a alert tone when the volume reaches the
minimum or maximum level.
- The microphone can't work when using a wired
headphone.
The “*” is available to the primary headphone with enabled ShareMe
function.
Answer a call*
The LED flashes red twice every second and
press the power button to answer the call. Then
the LED flashes blue twice every second.
Reject a call* Press and hold the power button for 2 seconds
End a call* Press the power button
Redial the last number* Press and hold the power button for 2 seconds
sounds pose a potential hearing risk. It is highly
recommended that setting low volume level before
putting on the headphone and avoiding exposing
yourself continuously to high volumes. If you need to use
the headphone for a long period, rest ten minutes for a
half hour using.

EN-9
11. Troubleshooting
Q: The headphone cannot be turned on.
A: The battery may be flat. Please recharge the battery
and try again. Refer to chapter 4. Charging the Battery.
Q: Why doesn’t the headphone pair with the mobile
phone?
A: Please check the followings.
- Check that the headphone is charged and is in pairing
mode.
- Make sure that the mobile phone's Wireless function is
on.
- Make sure the two devices are in the effective pairing
range. (10 meters). If use ShareMe function, make
sure two headphones are within 5 meters.
- Make sure that there is no obstacle between the
headphone and the mobile phone, such as electronic
equipment and a wall.
- Furthermore, you can try restarting the headphone and
pairing it with the mobile phone again.
- Make sure the paired device’s wireless function is
turned off.
Q: There is some noise.
A: Wireless is a radio technology, so it is sensitive to
obstacles between the headphone and the pairing
device. Please make sure that there is no obstacle
between the two devices and is within 10 meters. If use
ShareMe function, make sure two headphones are
within 5 meters.
Q: I can't hear sound.
A: Please check the followings.
- Try increase the volume.
- Make sure that the Wireless function is on and whether
the two devices are connecting and within 10 meters. If
use ShareMe function, make sure two headphones are
within 5 meters.
Q: My mobile phone or computer cannot find the
headphone.
A: Please check that the headphone is in pairing mode.
Refer to chapter 5. Pairing with Wireless devices.
Sometimes when the headphone is connected too many
Wireless devices, it cannot search and pair effectively.
Or your mobile phone and computer are already
connected to many other devices. Try removing some
connections before searching the headphone.

EN-10
The ShareMe 5 is covered by a 1-year manufacturer
warranty. For more information, visit
www.ausdom.com/warranty.
12. Warranty
Q: The headphone cannot be turned on.
A: The battery may be flat. Please recharge the battery
and try again. Refer to chapter 4. Charging the Battery.
Q: Why doesn’t the headphone pair with the mobile
phone?
A: Please check the followings.
- Check that the headphone is charged and is in pairing
mode.
- Make sure that the mobile phone's Wireless function is
on.
- Make sure the two devices are in the effective pairing
range. (10 meters). If use ShareMe function, make
sure two headphones are within 5 meters.
- Make sure that there is no obstacle between the
headphone and the mobile phone, such as electronic
equipment and a wall.
- Furthermore, you can try restarting the headphone and
pairing it with the mobile phone again.
- Make sure the paired device’s wireless function is
turned off.
Q: There is some noise.
A: Wireless is a radio technology, so it is sensitive to
obstacles between the headphone and the pairing
device. Please make sure that there is no obstacle
between the two devices and is within 10 meters. If use
ShareMe function, make sure two headphones are
within 5 meters.
Q: I can't hear sound.
A: Please check the followings.
- Try increase the volume.
- Make sure that the Wireless function is on and whether
the two devices are connecting and within 10 meters. If
use ShareMe function, make sure two headphones are
within 5 meters.
Q: My mobile phone or computer cannot find the
headphone.
A: Please check that the headphone is in pairing mode.
Refer to chapter 5. Pairing with Wireless devices.
Sometimes when the headphone is connected too many
Wireless devices, it cannot search and pair effectively.
Or your mobile phone and computer are already
connected to many other devices. Try removing some
connections before searching the headphone.

EN-11
13. Specifications
Microphone
Spec.
Microphone Unit 4*1.5mm
Omni-directional
-42±3dB
≤2.2KΩ
100Hz-10,000Hz
Speaker Spec.
Wireless Spec.
Battery Spec.
Directivity
S.P.L
32Ω±15%Impedance
95±3dB
S.P.L
20mW
Rated power
Impedance
Φ40±0.3mm
Speaker diameter
2.402GHz-2.48GHz
Transmission
frequency
20Hz-20,000Hz
Frequency
response
4.1+EDRWireless version
HSP/HFP/A2DP/AVRCPSupport profile
-92dBmSensitivity
Built-in 400mah rechargeable
lithium battery
Battery type
Mixcder ShareMe 5Pairing name
Micro USBCharging port
About 16 hours talking/About 14
hours music playing time
Running time
10mWireless distance
Standby time
Charging time
Operating
temperature
More than 2000 hours
About 2 hours
-10˚C-50˚C
-40˚C-80˚C
Storage temperature
Frequency response
1-10VOperating voltage
Note: Features and technical specifications are subject
to change without notice, we apologize for any
inconvenience.