Mixcder E7 User manual

User Manual • Uživatelský manuál • Užívateľský manuál •
Használati utasítás • Benutzerhandbuch
Model: E7
Wireless Headphones

2
Content • Obsah • Tartalom • Inhalt
English
3 – 22
Čeština
23 – 42
Slovenčina
43 – 62
Magyar
63 – 82
Deutsch
83 – 103
Importer • Dovozce • Dovozca • Importőr • Importeur
Alza.cz a.s.
Jankovcova 1522/53
Prague 7
www.alza.cz

3
Dear customer,
Thank you for purchasing our product. Please read the following
instructions carefully before first use and keep this user manual for future
reference. Pay particular attention to the safety instructions. If you have
any questions or comments about the device, please contact the customer
line.
✉www.alza.co.uk/kontakt
✆[phone]

4
1Introduction
Thank you for purchasing the Mixcder E7 Wireless Active Noise Cancelling
Headphone. Mixcder E7 professional ANC technology keeps noise out and
music in, so you can get deeper into your music, your work, or whatever
you want to focus on. Mixcder E7 features the Bluetooth 5.0 for
unparalleled sound quality, fewer drop-outs, lower latency & stable
connection to deliver a skip-free listening experience. Large 40mm drivers
with high dynamic bass response bring you an amazing audio enjoyment.
Built-in 500mAh rechargeable battery provides up to 25h sufficient music
playtime, while charges for 5-8 minutes to get 2-3 hours
playtime.Ergonomic & protein leather ear cushions with 90° swivel ensure a
pillow comfort and a snug fit. We use fashionable color coating for your
perfect look!
Note: Please read the user manual carefully before using, and keep it
properly for future reference.

5
2Package Contents
1× Wireless Headphones
1× Micro USB Charging Cable
1× 3.5mm Audio Cable
1× User Manual
1× Compact Carrying Case

6
3Product Overview
1
Microphone
5
Next track /Vol+
9
ANC Switch
2 3.5mm Line-in Port 6
LED Indicator /
Charging LED
10
Micro USB
Charging Cable
3 Power Button 7
Micro USB Interface
for charging
11
3.5mm Audio
Cable
4
Previous Track /Vol-
8
ANC LED Indicator

7
4Charging
Use the supplied micro USB charging cable to recharge the headphone. It
takes about 1.5 hours for the first charge, and only 1 hour for a subsequent
charge. The headphone LED turns to solid red during charging. When the
battery is fully charged, the LED turns off. In order not to affect the charging
time, please turn off the wireless function during charging, but you can use
the audio cable.
When the battery is low, the LED indicator lights up red. At the same time,
the headset also provides a low battery warning tone.
Note: It is strongly recommended fully charging for the first use. Playtime
varies according to volume level and audio content.

8
5Pairing with Wireless Devices
5.1 Pairing the Headphones with a Computer
Before pairing the headphones with your computer, please make sure your
computer or laptop has the built-in Wireless feature. If not, you must
purchase a Wireless dongle, preferably version 2.1 or above.
1. Make sure the headphones are off.
2. Turn on wireless capability on the computer.
3. The “Search new device” screen will be displayed.
4. Do not place both devices more than 1 meter away from each other.
5. Press and hold the power button on the headphone until it powers
on but don’t let go just yet. Continue holding down on the power
button until you see the LED indicator flashes blue and red
alternately, which means your headphone is in “pairing mode”
waiting to be paired with your device. You will hear a prompt.
6. As soon as the computer system detects the new device, please
select “Mixcder E7” to pair. Once successfully paired, the LED turns to
solid blue. You will hear a prompt.

9
5.2 Pairing the Headphones with a Phone
1. Make sure the headphones are off.
2. Do not place both devices more than 1 meter away from each other.
3. Press and hold the power button on the headphones until it powers
on but don’t let go just yet. Continue holding down on the power
button until you see the LED indicator flash blue and red alternately,
which means your headphones are in pairing mode waiting to be
paired with your device. You will hear a prompt.
4. Turn on wireless capability on your phone and search for new
devices.
5. Select the “Mixdcer E7” to pair. Once successfully paired, the LED
turns to solid blue. You will hear a prompt.
5.3 Connecting to Paired Devices
Mixcder E7 will pair with the last paired device automatically when turning
on. Because of different systems, some computers or laptops may need to
be manually paired every time.

10
6Active Noise Cancelling
Mixcder E7 contains a noise cancelling circuit. Noise mainly from airplanes,
buses or trains is effectively reduced.
1. The noise cancelling effect may not be pronounced in a very
quiet environment as some noise may be heard.
2. The noise cancelling effect may vary depending on how you
wear the headphones.
3. The noise cancelling function works for noise in the low
frequency band primarily. Although noise is reduced, it is not
cancelled out completely.
4. When you use the headphones in a train or a car, noise may
occur depending on street conditions.