Mixx Audio JX2 User manual

QUICK START GUIDE

JX2 Headphones
3.5mm AUX cable
Micro USB charging cable
BOX CONTENTS

Volume Up/Skip Forwards
Multi-Function Button
Volume Down/Back
Micro USB Charging Port
3.5mm Audio Jack Socket
LED Indicator Light
LET’S START
1
2
3
4
5
6
1
2
6
4
5
3

ON - Press and hold the Multi-Function Button
until your JX2 says “POWER ON” and “PAIRING”.
Your JX2 automatically starts searching for a
Bluetooth audio device to pair with.
The LED Indicator Light will ash BLUE and RED.
OFF - Press and hold the Multi-Function Button
until your JX2 says “POWER OFF”.
The LED Indicator Light will switch o.
LET’S POWER
6
6
2
2

You can pair your JX2 with a Bluetooth enabled
audio device such as, a phone, tablet, computer
or laptop.
Your JX2 headphones must be within 1m of your
Bluetooth device, press and hold the Multi-Function
button until your JX2 says “POWER ON”
and “PAIRING”.
The headphones will enter Pairing Mode and the LED
Indicator Light will ash BLUE and RED.
Go to the Bluetooth settings on your device and
select ‘Mixx JX2’ from the list.
Once successfully paired, your JX2 will say
“CONNECTED” and the LED Indicator Light
will remain a solid BLUE.
You can now enjoy your music.
Once pairing is complete, the JX2 will ‘remember’
the last Bluetooth audio device it was connected to.
You do not need to pair them again.
PAIRING YOUR JX2
WITH AN AUDIO DEVICE
6
6
2

Connect the JX2to any USB mains charger,
computer or power bank using the micro USB
charging cable included.
The JX2will begin to charge automatically and the
LED Indicator Light will light up RED.
Once the JX2is fully charged, the LED Indicator
Light will switch o.
LET’S CHARGE
6
6

Power On/Off
Play/Pause
Volume Up/Down
Next/Previous
Answer Phone Call
End/Reject
a Phone Call
Re-dial
Enter Pairing Mode
Press and hold Multi-Function
Button until you hear
“POWER ON/POWER OFF”
Short press Multi-Function
Button
Press and hold + or – Button
Short press + or – Button
Short press Multi-Function
Button
Press and hold Multi-Function
Button for 2 seconds
Double press the Multi-Function
Button
Press and hold Multi-Function
button until you hear
“POWER ON” and “PAIRING”
CONTROLS

Do not use this product near water, or where it may
become wet.
Only clean this product with a dry cloth.
Do not expose this product to heat sources such
as radiators, heaters, cookers, or other devices
that produce heat. This may lead to re damage or
personal injury.
This product contains a Lithium battery.
Incorrect disposal may result in explosion.
LET’S BE SAFE

This product can be recycled.
Products bearing this symbol must NOT be
thrown away with normal household waste.
Take the product to a collection point designated for
recycling of electronic devices.
Find out more about return and collection points
through your local authority.
LET’S RECYCLE

For technical support or to download the user guide
visit www.mixxaudio.com
MHJ2-QSG01