Mixx Tribute User manual

QUICK START GUIDE

THANKS!
Thanks for choosing our MIXX Tribute Vinyl Record Player.
All of our products come with a 2 year warranty
for peace of mind.
Feedback is welcome, email us on [email protected]om
for any comments or queries. 1
2
2
3
4
6
7
CONTENTS
THE TURNTABLE
WHAT’S IN THE BOX?
LET’S GET STARTED
LET’S PLAY
LET'S CONNECT
MAINTENANCE
LET’S BE SAFE

21
THE TURNTABLE
Function Indicator
On/Off Volume Knob
Headphone Jack
Auto-Stop Switch
Hold Down Clip
RCA Jacks
Aux In Jack
Power Jack
Turntable Platter
Turntable Spindle
45 RPM Adapter
Tonearm
Speed Switch
Tonearm Lever
Pitch Control Knob
Function Switch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 2
14 15 16 3
4
5
6
7
8
9
10
11
12
13
WHAT’S IN THE BOX?
LET’S GET STARTED
Find a flat and level surface to place the unit on. It’s
important to choose a stable location that is free from
vibrations.
Remove the tie-wrap that secures the tonearm [4] .
Connect the AC adaptor to the Power Jack [16] of the unit.
Note: It’s crucial not to plug the AC power adaptor into
the power outlet until you’ve completed all the assembly
steps. Before powering on, double-check that all the
connections are set up correctly. Remember to always
turn off the power when connecting or disconnecting any
components.
4
16
Before you throw away any of the packaging, please take
a moment to carefully check and ensure that all of the
following items are in the box:
Turntable
45 RPM adapter
Power adaptor
If you find that any of these accessories are missing,
please reach out to Mixx customer service for further
assistance.
Please hold on to the original packaging materials in
case you need to exchange or return any items later on.
Turntable 45 RPM
Adapter
AC Power
Adapter

3 4
LET’S CONNECT
1. Rotate the On/Off Volume Knob [10] to turn on the power.
2. Set the Function Switch [8] to the PH position.
Note: The Function Indicator [9] will be RED.
3. Set the Speed Switch [5] to the appropriate speed for the record you are
playing. (e.g., 33 RPM, 45 RPM, or 78 RPM).
4. Place the record on the turntable. Use the 45 RPM Adapter [3] if
necessary to accommodate records with larger center holes.
5. Remove the stylus protector from the stylus assembly.
Note: Make sure to keep the included stylus guard in place whenever the
turntable is moved or cleaned to avoid damaging the stylus.
6. Release the tonearm Hold Down Clip [13] . This clip holds the
tonearm [4] in place when the turntable is not in use. Remember to lock it
back when the turntable is not in use.
7. Use the Tonearm Lever [6] to lift up the tonearm [4] gently.
8. Carefully move the tonearm [4] over the record to the desired starting
position for playback.
Set the Tonearm Lever [6] back to the down position, and the tonearm [4]
will slowly descend onto the record and begin playback.
9. When the record is finished playing, use the Tonearm Lever [6] again to
raise the tonearm [4] .
Return the tonearm [4] to the Tonearm Rest.
Release the lever [6] to let the tonearm [4] sit back at its rest.
If you want to suspend playback temporarily, repeat these steps.
10. Lock the Tonearm Hold Down Clip [13] to secure the tonearm [4] in
place for storage.
10
8
9
5
3
13
6 4
4
46
4
4
6
6 4
13 4
LET’S PLAY
Connecting to a Stereo System:
Connect the RCA Jacks [14] directly to active/powered
speakers or the appropriate input of your audio system to
output analogue line-level signals. Ensure the RED plug
is in the RIGHT channel, and the WHITE plug is in the
LEFT channel.
Note: The RCA Jacks [14] are not intended for use with
passive speakers; connecting them will result in signifi-
cantly reduced volume.
4
Connecting via Aux:
Input
Connect to the Aux In Jack [15] using a 3.5mm auxiliary
cable to play music through the turntable speakers from
another audio device.
Output
Connect to the Headphone Jack [11] using a 3.5mm
auxiliary cable to listen to the turntable with wired head-
phones.
Note: The built-in speaker will stop playing once wired
headphones are plugged in.
14
14
15
11
Note: If the Auto-Stop Switch [12] is set to the ON po-
sition, the platter will automatically stop after playback.
This feature applies to most 33RPM vinyl records. On
occasion, the turntable may stop before the end of the re-
cord. Set the Auto-Stop Switch [12] to OFF to overcome
this.
You can also adjust the speed of your record by turning
the Pitch Control Knob [7] clockwise to increase it or
anti-clockwise to decrease it by approximately 10%.
12
7
12

5
MAINTENANCE
Routine Maintenance
Avoid touching the stylus tip with your fingers and clean the stylus regularly
with a soft brush using back-and-forth motions.
Regularly clean the records with a record cleaning brush and record
cleaning solution.
Clean the turntable lid and turntable cabinet with a slightly damp microfi-
bre cloth.
IMPORTANT! Do NOT use a cleanser that contains alcohol, benzene or any
other harsh chemicals that might damage the turntable.
Replacing your Needles
Removing the Needle
A
B
C
1. Place a screwdriver at the tip of the stylus and push downward [x] .
2. Remove the stylus by pulling it forward [x] and pushing downward [x] .
Installing the Needle
D
E
F
1. Hold the tip of the stylus and insert the stylus by pushing downward [x] .
2. Push the stylus upward [x] until the stylus locks locks into the tip
position [x] .
6
Connecting via Bluetooth:
Input
You can play music from your smartphone or other audio
device.
Set the Function Switch [8] to [R] ; this will cause the
Function Indicator [9] to flash BLUE.
When your device is in pairing mode, the turntable will
appear on your audio device as “MIXX Tribute”.
Once paired successfully, the Function Indicator [14]
will turn off.
You can now play music from your device through the
turntable; you can adjust the volume using the On/Off
Volume Knob [10] .
To disconnect your device, turn the Function Switch away
from [R] .
Note: Position your audio device as close as possible to
the turntable when pairing.
Output
You can transmit the audio from your records to your
Bluetooth headphones or speakers.
Set the Function Switch [8] to [T] ; this will cause the
Function Indicator [9] to flash BLUE.
Once both your device and the turntable are in pairing
mode, they will connect automatically and the Function
Indicator [14] will turn off.
To disconnect your device, turn the Function Switch away
from [T] .
8
9
8
9
10
14
14
R
R
T
T
Storing your Turntable
Before storage, ensure that the tonearm is locked using the latch on the
tonearm rest.
Remember to store in a cool, dry location and keep all accessories with the
turntable.
Do not stack anything on top of the turntable.
A B C
D E F
A
B C
D
E
F

7
LET’S BE SAFE
IT IS IMPORTANT THAT YOU PLEASE READ THIS SECTION COMPLETELY.
Ensure the product is correctly
connected using the manu-
facturer’s original accessories
included with the product. Only
use attachments recommended
by the product manufacturer to
avoid potential hazards.
Do NOT make unauthorized
alterations to this product.
Take care to protect the power
cord from being walked on or
pinched, especially at the plugs,
convenience receptacles, and
where it exits from the product.
Avoid overloading wall outlets,
extension cords, or integral
convenience receptacles, as this
can create a fire hazard or risk of
electric shock.
During lightning storms or when
the product remains unused for
extended periods, it is advisable
to unplug the product for safety
reasons.
Never insert any objects into
the product through openings,
as they may come into contact
with dangerous voltage points or
cause short-circuits that could
result in fire or electric shock.
Additionally, avoid spilling any
liquids on the product.
The cabinet features slots and
openings for ventilation purposes
to ensure reliable operation
and prevent overheating of the
product. Please avoid blocking or
covering these openings.
For your safety, refrain from at-
tempting to service this product
yourself. Opening or removing
covers may expose you to dan-
gerous voltage or other hazards.
It is advised to seek assistance
from qualified service personnel
for any servicing needs.
Product may contain small parts
which can be a choking hazard.
Please keep the product out of
reach from children under 6 and
animals.
If your product has become
damaged in any way, does not
operate normally or has been
dropped, please refer to a qual-
ified person to have the product
checked before continuing to
use it.
The operating temperature
range for this product is 5º - 40º
celsius.
Please avoid exposing the
product to moisture, liquid spills
or splashing.
If you experience any of the is-
sues listed above, please turn off
your device and contact MIXX Ltd
on [email protected].
[email protected] mixxaudio.com
@
MIXX Limited
5 The Pavilions, Brighton Road, Pease Pottage,
West Sussex, RH11 9BJ. United Kingdom
TRIBUTEVINYLRPENHTG01