MJM AW-S-M-L User manual

MJM International Corporation
"We Do Care - We Do More"
323 East Owassa • Suite 4 • Edinburg, TX 78539 • 1-800-270-6199 • 956-781-5000 • Fax [phone]
www.mjminternational.com • hmorole[email protected]
STEP 1 –CASTERS
INSERT CASTER SOCKETS INTO BOTTOM FRAME.
NOTE: A PHILLIPS SCREWDRIVER OR A CORDLESS HAND DRILL IS REQUIRED TO TIGHTEN / SECURE ALL SCREWS.
IDENTIFY COMPONENTS TO START ASSEMBLY
DRILL THROUGH
CASTER SOCKETS
USING 1/8 DRILL
BIT AND PILOT
HOLES AS
REFERENCE.
SECURE USING 1/2’’
RETAINING
SCREWS AND PILOT
HOLES AS
REFERENCE.
STEP 2 CASTERS.
BOTTOM FRAME.
TOP FRAME WITH SEAT.
FRONT GATE WITH PVC POST.
BOX WITH CASTERS AND SCREWS
o2 CASTERS WITH BRAKES.
2 CASTERS NON BRAKE.
STEP 3 STROLLER TOP FRAME ASSEMBLY
REMOVE SCREWS FROM
BOTTOM FRAME.
INSERT TOP FRAME INTO
BOTTOM FRAME, ALIGN
PREDRILLED HOLES.
SECURE WITH SCREWS
PROVIDED.
AW-S-M-L
Assembly Instructions

MJM International Corporation
"We Do Care - We Do More"
323 East Owassa • Suite 4 • Edinburg, TX 78539 • 1-800-270-6199 • 956-781-5000 • Fax [phone]
www.mjminternational.com • hmorole[email protected]
`
`
`
NOTE: CASTERS, TOP FRAME, BOTTOM FRAME, SEAT, SEAT STRAP, GATE, MUST BE CHECKED AND
SECURED PRIOR TO USING SHOWER CHAIR.
WARNING NOT SECURING ALL THE ABOVE CAN CREATE A SERIOUS SAFETY HAZARD.
STEP 4 SEAT & GATE
STEP 5 GATE.
STEP 6 SEAT STRAP
PRODUCT COMPLETELY ASSEMBLED
SECURE SEAT
STRAP BY SLIDING
IT OVER THE FRONT
GATE BAR.
SECURE GATE BAR
WITH STRAP
PROVIDED.
SECURE SEAT WITH
SNAPS PROVIDED.
REMOVE SCREW FROM
CORNER T FITTING.
INSERT PVC PIPE INTO
CORNER T FITTING,
ALIGN USING COLOR
CODED DOTS.
INSERT PVC PIPE INTO CORNER T FITTING, ALIGN
USING COLOR CODED DOTS.
SECURE PVC PIPE WITH SCREW PROVIDED.
STEP 7
Rev: 1.3
AW-S-M-L
Assembly Instructions