Mobee mobile phone DESIGNED FOR CHILDREN User manual

MOBILE PHONE DESIGNED FOR CHILDREN
USER MANUAL
www.mobeephone.com.au

CONTENTS:
CUSTOMER SERVICE
MEET MOBEE
Package Contents
Installing SIM card
Charging the battery
BASIC OPERATIONS
Turn on/Off
Keypad Lock
Incoming call
Changing ring volume during incoming call
Changing audio volume during phone conversation
DIAL
Speed dial using the four speed dial keys
- Programming keys for speed dial
- Updating the password
- Dial using the speed dial keys
Dial number from SIM card memory
Dial number from call lists
SOS BUTTON
MONITOR
THEFT PROTECTION
MENU
Messages
Call Lists - incoming, outgoing and missed calls
Settings
- Time and date settings
- Keypad lock

- Limit call duration
- Automatic Power on
- Automatic Power off
- Tone settings
- Ringtone settings
- Message tone
- Ring tone volume
- Keypad volume
- Silent mode
- Language
- Restore factory settings
- Version information
Alarm

THANK YOU FOR PURCHASING YOUR MOBEE DEVICE
Please read carefully the user manual.
We recommend you to read carefully the user manual and
to visit our website at www.mobeephone.com.au in order
to receive comprehensive information regarding the use of
your Mobee and to ensure that you will be able to keep in
touch with your child anytime and anywhere.
CUSTOMER SERVICE
Customer Service is available Monday-Friday,
from 9am-5pm.
Melbourne local time, at 1300791439.
MEET MOBEE
Right selection
key (RSK) /
Back
Left selection key
(LSK)
Call key /
Answer
Speed dialing keys
(also function as:
up, down, left and
right)
End call key/
Power on and off
SOS key
3

4
PACKAGE CONTENTS:
• Mobee mobile phone (K-100)
• Battery
• Charger
• Neck strap
• User guide
INITIAL OPERATING
INSTALLING THE SIM CARD
Warning: Before opening Mobee in order to insert the SIM
card, turn Mobee off and unplug the charger. Please note,
the SIM card can easily be damaged by scratches or bending.
Please be careful during installation of the SIM card.
• To turn Mobee off, press the End call key and hold for
about 4 seconds.
• Remove the back cover. The
 mark at the bottom of the
back cover indicates to lift the cover up for opening.
• Remove the battery.
• Insert the SIM card into the slot.
• Put back the battery. Make sure the battery is inserted
correctly.
• Close the back cover. A click sound indicates that the
back cover is closed properly.
CHARGING THE BATTERY
Before using your Mobee, you need to fully charge the
battery. To charge the battery, connect the charger to your
phone and then connect the charger to the power socket.

5
A battery sign indicating that the Mobee is in charging
process will appear at the right corner of the screen.
After charging, when the battery is fully charged, full battery
sign will appear .
After charging, unplug the charger from the power socket
and then unplug the charger from the phone.
Please note: If the battery is completely empty, it may take
several minutes until you will see the charging sign or
before Mobee can be used.
BASIC OPERATIONS
TURN ON
To turn Mobee on press and hold the End call key .
If the SIM card is not installed properly, the warning «No
Sim Card» will appear on the screen. In this case, you will
need to turn off the phone by holding the End call key ,
put the SIM card and turn on your Mobee again.
After turning on Mobee it will start detecting network.
When the network symbol appears on the screen Mobee
can be used.
Please note: Mobee will not be able to receive or make
phone calls when the network signal strength is too low.
TURN OFF MOBEE
To turn Mobee off press and hold the End call key .
KEYPAD LOCK
Mobee keys are locked automatically after a period of time
which can be set, see explanation below.

6
To unlock the keypad, press the left selection key and then
immediately press the right selection key.
When the keypad is locked a key symbol appears on the
upper right side of the screen.
INCOMING CALL
When Mobee is receiving a call, it rings and vibrates
according to your ringtone settings (see further information
on ringtone settings). The calling phone number will appear
on the screen or if the phone number is stored in the SIM
card memory, the name will appear on the screen.
In order to answer a call, press the call key .
To reject the call, press the End call key .
To end the call, press the End call key .
CHANGING RING VOLUME DURING INCOMING CALL
In case of incoming call, when Mobee rings, you can increase
the ring volume by pressing the up navigation key or
decrease the ring volume by pressing the down navigation
key .
Note that if you lower the volume to the lowest level you
will not be able to hear the ring of incoming call at all.
CHANGING AUDIO VOLUME DURING PHONE CONVERSATION
During a call, you can increase or decrease the volume by
pressing the up navigation key to increase the audio
volume or by pressing the down navigation key to
decrease the audio volume.

7
DIALING
You can make a call in three ways:
1. Using one of the four speed dial keys ,
after it was predefined.
2. Dialing numbers stored in your SIM card memory.
3. Dialing a number from the list of incoming calls, outgoing
calls or missed calls.
1. SPEED DIALING USING THE FOUR SPEED DIAL KEYS
PROGRAMMING SPEED DIAL KEYS:
Programming the four speed dial keys is done by sending a
text message to the phone number of Mobee. You can send
the message from any other mobile phone.
The programming message to update the speed dial starts
with “*#”. It consists of three sequences of characters, as
detailed below, separated by * signs and ends with # sign:
*#1111* 0000*XXXXXXXXXX#
A. Symbol key you wish to program:
To program «Mother» key , write four times the
digit 1 (1111).
To program «father» key , write four times the digit
2 (2222).
Beginning of
the message
Symbol
Key
Password Phone
number you
want to store

8
To program «Home» key , write four times the digit
3 (3333).
To program «Bee» key , write four times the digit
4 (4444).
B. 4-digit password. The initial password is 0000.
C. The number you want to store in the speed dial key.
For example, to program the «Mother» speed dial key
to dial number 042-1234567, when the password is 0000,
send the following message:
*#1111*0000*0421234567#
To program the «Father» speed dial key to dial number
042-1234567, when the password is 0000, send the
following message:
*#2222*0000*0421234567#
To program the «Home» speed dial key to dial number
03-1234568, when the password is 0000, send the following
message:
*#3333*0000*031234568#
To program the «Bee» speed dial key to dial number
042-1234567, when the password is 0000, send the
following message:
*#4444*0000*0421234567#

9
UPDATING THE PASSWORD (FOR SENDING MOBEE
PROGRAMMING TEXT MESSAGE UPDATES)
To update your password, send to Mobee from any other
phone, the following message sequence:
*#6666*AAAA*BBBB#
DIALING USING THE SPEED DIAL KEYS
To dial a number stored in speed key, unlock the keypad and
click on the appropriate speed dial key.
2. DIALING A NUMBER STORED ON THE SIM CARD MEMORY
To enter the SIM card memory, press the right selection key.
You can browse through the stored numbers by pressing
the upper and lower navigation keys. To call a
number, press the call key . Pressing the left selection
key enables dialing or showing the number on the screen.
Use any regular mobile phone to program the SIM card
memory.
3. DIALING A NUMBER FROM THE LIST OF INCOMING
CALLS, OUTGOING CALLS OR MISSED CALLS
To enter the call lists, press the left selection key, select
«Call lists», and choose one of the options: «Incoming»,
«Outgoing» or «Missed». You can scroll through the
numbers in the list by pressing the upper or lower
Beginning of
the message
Old password (the
default password is
0000)
New
Password