MobiCom GL600 User manual

Mobicom Telematics –GL600 GPS Smart Lock User Guide
1/ 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
GL600 GPS Smart Lock
User Guide
V2.1
Shenzhen Mobicom Telematics Co.,Ltd Tel: + 86 755 8450 8126
RM602,Xichuangcheng,No.144,Zhiwuyuan Road, Email: sales@mobicomtracking.com
Longgang District, Shenzhen,China Website: http://www.mobicomtracking.com

Mobicom Telematics –GL600 GPS Smart Lock User Guide
2/ 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
Contents
Contents....................................................................................................................................................................... 2
1 Copyright and Disclaimer.......................................................................................................................................... 3
2 Product Overview ..................................................................................................................................................... 3
3 Product Functions..................................................................................................................................................... 3
4 Specifications ............................................................................................................................................................ 5
5 Standard Package and Optional Accessories ............................................................................................................ 6
6 Description of Product Appearance.......................................................................................................................... 7
6.1 Front View...................................................................................................................................................... 7
6.2 Bottom View .................................................................................................................................................. 8
6.3 Side View........................................................................................................................................................ 9
6.4 Back View and Back Cover Opened ............................................................................................................. 10
Back View................................................................................................................................................... 10
Back Cover Opened.................................................................................................................................... 11
7 First Use .................................................................................................................................................................. 12
7.1 Installing a SIM card..................................................................................................................................... 12
7.2 Power on the GL600 device ......................................................................................................................... 12
7.3 LED indicators and Buzzer Instruction ......................................................................................................... 13
LED Indicators: ........................................................................................................................................... 13
Operation and Buzzer Instructions: ........................................................................................................... 13
7.4 Device Initialization by SMS command........................................................................................................ 14
7.5 Description of product working Process...................................................................................................... 16
7.6 Lock and Unlock Device ............................................................................................................................... 16
7.6.1 Lock the device ................................................................................................................................. 16
7.6.2 Unlock the device ............................................................................................................................. 16
7.6.2.1 Unlock the device by SMS command..................................................................................... 16
7.6.2.2 Unlock the device by authorization RFID tags ....................................................................... 16
8 Tracking the device in Mobicom GPS Platform....................................................................................................... 17
8.1 Principle of communication ......................................................................................................................... 17
8.2 Get the login ID............................................................................................................................................ 17
8.3 Login Software Platform .............................................................................................................................. 17
9 Device Installation................................................................................................................................................... 19
10 Warranty Terms..................................................................................................................................................... 20
Contact Us.................................................................................................................................................................. 20

Mobicom Telematics –GL600 GPS Smart Lock User Guide
3/ 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
1 Copyright and Disclaimer
Copyright © 2019 Mobicom Telematics Co.,Ltd All rights reserved. Reproduction, transfer, distribution
or storage of part or all of the contents in this document in any form without the prior written permission
of Mobicom Telematics is prohibited.
All contents in this manual are accurate, however, with continuous research and development, we might
update the manual from time to time. The manual which you are reading is reflecting of present state
of art of the products described therein, we have endeavored to give a description that is as complete
and clear as possible in order to make it easy for you to use our products. There might be some contents
described inaccurate technical expression, with the rapid development of technology, we reserve the
rights to incorporate technical alterations and developments without separate notice in advance.
Mobicom Telematics is not liable for any loss or injury caused by using or referencing to any products.
2 Product Overview
GL600 is 2g/3g Intelligent Remote GPS Lock,bulit-in10400maH battery, G-sensor and RFID reader,
andmonitor the container or asset's location and door status. through the wireless technology, User
can open the GPS lock remotely by SMS password or (android or IOS) app. If there is no cellular
network, user can also open the lock by the RFID tags on spot.
3 Product Functions
Hardware/
Firmware
Main Functions
Description
Hardware
2G/3G cellular network
4G customizable
GPS+LBS Positioning
LBS info.(CELL ID and LAC)
Dual SIM cards
It can be installed with two Micro SIM cards
and supports the dual SIM single standby
mode. The device will automatically select
a SIM card to register the network.
Build in 10400mAH Rechargeable
18650 lithium battery
Up to 12800mAH(Optional)
Build in 3 Axis acceleration sensor
Motion or vibration detecting
Buzzer and LED indicators reminder
Different device Status Buzzer and LED
indicator reminder
Charger
5V DC -2A charging

Mobicom Telematics –GL600 GPS Smart Lock User Guide
4/ 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
Bluetooth(Optional)
Unlocking via APP or Download historical
Track data through Bluetooth(replace
serial port)
Firmware
Real time Location querying
Querying current location by SMS
command
Remote unlock
Unlock the device by
command(GPRS/SMS)
Unlock device on spot
Unlock the device by authorized RFID tags
Locking Automatic
The device will automatically lock when the
lock rope is inserted
50 authorized RFID tags(Card)
Unlock the device by authorized RFID tags
Geo-fence
10 Geo-fences
5 VIP numbers
receiving SMS alert and sending command
via SMS
Supports 9 alerts
lock rope tamper,
swiping unauthorized RFID tag,
unlocking,
wrong password,
vibration,
enter geo-fence,
exit geo-fence,
low battery,
Back cover Opened
Locking and Unlocking Report
The way to lock or unlock, Locking
/unlocking RFID tag ID, report time, locking
/unlocking successful or failed,
Wake up by 5 conditions
vibration,
back cover opened,
swiping RFID tags,
Lock/unlock,
RTC(every 30 minutes)
FOTA
Firmware upgrading via OTA

Mobicom Telematics –GL600 GPS Smart Lock User Guide
5/ 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
4 Specifications
Items
Description
Size
195mm x 114mm x 37mm
Weight
700g( Include main unit, antenna, battery, shell)
Material
Engineering plastic
GPS Module
Skylab 12BL
GSM module
Quectel M26 or UC15 or EC25
Working temperature
-20°C -- +80°C
Store temperature
-40°C -- +80°C
Humidity
5%—99%
Standard battery
Rechargeable battery 10400mAh
Average working current
<90 mA
Average current standby
<100uA
Waterproof standard
IP67
Transmission mode
Support TCP(GPRS) or SMS(message)

Mobicom Telematics –GL600 GPS Smart Lock User Guide
6/ 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
5 Standard Package and Optional Accessories
Items
Figure
Standard
Optional
GL600 Main device
●
Lock rope
●
RFID tags or Card(2 pcs)
●
Micro USB configure cable
●
Charger Adapter
(DC5V- 2A output)
●

Mobicom Telematics –GL600 GPS Smart Lock User Guide
7/ 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
6 Description of Product Appearance
6.1 Front View
1 Lock rope: standard size 35 cm
2Swipe card area:Swipe RFID card

Mobicom Telematics –GL600 GPS Smart Lock User Guide
8/ 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
6.2 Bottom View
1 Charger Interface 5V DC -2A Charger
2 Buzzer: Different Device Status ,Buzzer reminder

Mobicom Telematics –GL600 GPS Smart Lock User Guide
9/ 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
6.3 Side View
.
1LED indicator:
GPS-Blue led : GPS fix Status
GSM-Green led: Cellular network connection Status
LVS-Yellow led: Low Battery Status
CHG-Red led: Charging or Charging full Status

Mobicom Telematics –GL600 GPS Smart Lock User Guide
10 / 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
6.4 Back View and Back Cover Opened
Back View
1 Cushioned silicone pad: Prevent equipment damage when equipment crashes
2 Nameplate: Device Brand Name,IMEI and so on.
3Strong magnet: Prevent equipment shake and collision monitoring assets

Mobicom Telematics –GL600 GPS Smart Lock User Guide
11 / 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
Back Cover Opened
1 Power switch: Turn the switch to the left, power on the device;
Turn the switch to the right, power off the device.
2 Micro USB socket:Connect Micro USB configure cable to PC, initialize parameters or
debug purpose and Firmware upgrade.
3SIM1 slot:Push the SIM card holder down vertically to open it, and then put the Micro-
SIM card 1 inside, Press down then push the SIM card holder up vertically to
lock the SIM card
4SIM2 slot:Push the SIM card holder down vertically to open it, and then put the Micro-
SIM card 2 inside, Press downthen push the SIM card holder up vertically to
lock the SIM card
5 Light sensor:it’s used to detect whether Back Cover opened or not.

Mobicom Telematics –GL600 GPS Smart Lock User Guide
12 / 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
7 First Use
7.1 Installing a SIM card
Please refer to section ‘Back Cover Opened’, Open the Back Cover by screwdriver.
⚫Open the SIM1-SIM card slot
⚫Insert the Micro SIM card into the card slot with its gold-plated contacts facing towards the Printed
Circuit Board (PCB)
⚫Slide the SIM card holder to lock it in place
➢Ensure that SIM card’s SMS/Cellular Network service are available .
➢Ensure that the phone card PIN lock has been closed properly.
7.2 Power on the GL600 device
Please refer to section ‘Back Cover Opened’, Turn the switch to the left, power on the device .Look
LED lights ,If Yellow LED Blinking every 3 sec ,It indicates low battery status, Please refer to section
‘6.2 Bottom View’ , charge the device by 5V DC adapter about 8 hours.

Mobicom Telematics –GL600 GPS Smart Lock User Guide
13 / 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
7.3 LED indicators and Buzzer Instruction
LED Indicators:
Operation and Buzzer Instructions:
NO.
Operation/condition
Buzzer and LED status
1
Swipe unauthorized RFID tag
Buzzer ring 3 second continuously, GPS
led blinking 3 sec
2
Remote Unlock
4
Swipe authorized RFID tag
Buzzer ring twice,GPS led blinking once
5
Add authorized ID by swiping the
RFID tag successfully
6
Locking Automatic
7
never disconnect the lock rope
after unlocking
After unlock 10 sec ,Buzzer ring every 1
sec, GPS led keep blinking,
Stopped until lock rope inserted or 60
sec later
8
Insert lock rope but never locking
automatic successful
LED
Indicators
Status
Description
Blue LED
GPS
Blinking every 10 sec
GPS signal is fix
Blinking every 3 sec
GPS signal is invalid
Off
The device is in sleep mode or power off.
Green LED
GSM
Blinking very fast,
3 times in one sec
Registered GSM and connected
to GPRS,sending data to server
Blinking every 3 sec
Registered
GSM,but can’t connect to GPRS,need to check
parameters setting and if SIM card was activated
GPRS function.
Yellow LED
LVS
Blinking every 3 sec
When built-in battery’s power less than 30%
Red LED
CHG
Charging or charging full
When charging ,stable on and red color;
When charged full, stable on and green color

Mobicom Telematics –GL600 GPS Smart Lock User Guide
14 / 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
7.4 Device Initialization by SMS command
No.
Function Name
SMS Command Content
Response from GL600
Description
1
Set VIP numbers to
send and receive
SMS command
response
Set the first VIP number-
8613910102345:
(P11,1,1,8613910102345)
Set the second VIP number-
8615899874401:
(P11,1,2,8615899874401)
Note:
The SMS command content
includes brackets ‘(‘ and ‘)’
(7570101998,P11,1,861
3910102345)
(max: 5 phone numbers)
2
Set SIM1’s IP Port
and GPRS network
parameters(when
Insert SIM card to
SIM1)
(P06,1,13.228.118.160,18000,APN
,APNuser,APNpass)
Note:
If APN without account. Keep it
blank as below:
(P06,1,13.228.118.160,12000,APN
, ,)
(7570101998,P06,13.2
28.118.160,18000,CMN
ET,user,password)
Reply content is “IP” “Port”, Server IP Address:
13.228.118.160 Port:18000
Note:
Please get Server IP and Port from Mobicom
Technical support engineer.
3
Set SIM2’s IP Port
and GPRS network
parameters(when
Insert SIM card to
SIM2)
(P06,3,13.228.118.160,18000,APN
,APNuser,APNpass)
Note:
If APN without account. Keep it
blank as below:
(P06,1,13.228.118.160,12000,APN
, ,)
(7570101998,P06,13.2
28.118.160,18000,CMN
ET,user,password)
When device go to another country ,User can use
another local SIM card in order to Save on roaming
charges.
Note:
SIM1 and SIM2 can’t be working at the same time.
4
Set Data uploading
interval when device
wake up and also
RTC wake up time
interval.
(P04,1,30,30)
//command content explain:
P04 means command code
1 means set ; 0 mean query
30 means data uploading interval
when device wake up. Unit is sec.
range: [5,600]
30 means RTC wake up time
interval, unit is min.
Range:[30,1440]
(7570101998,P04,30,3
0)
Working Status instructions:
Normally, if there is no any external wake up
source, the device will go to sleep ,and wake up
according to RTC wake up interval(default is 30
minutes).
When swipe the RFID tags, send SMS command,
detecting vibration, lock rope disconnect /connect,
receive a call,RTC time interval, those conditions
will wake up this this device, when device wake
up, it will work about 10 minutes, during the 10
minutes, it uploading data according to Data
uploading interval(default is 30 sec)
5
Query current
location of device
(P02)
7570101998,09-28
12:11:02,Speed:0km/h,
Battery:85%,GPS:3,Loc
k Close,
device ID: 7570101998
Date time: 09-28 12:11:02
Month/day HH:mm:ss
GPS Speed: Speed:0km/h

Mobicom Telematics –GL600 GPS Smart Lock User Guide
15 / 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
http://maps.google.com/
?q=22.549737,114.076
685
Internal Battery Level: Battery:85%
Number of captured satellites: GPS:3
Lock status: Lock close/open
Google Map Link:
http://maps.google.com/?q=22.549737,114.07668
5
6
Unlocking device by
Password
(P43,888888)
888888 is the default password
(7570101998,P43,0,2)
“0” means failed,“1” means successfully,
2:means continuously input wrong password
times,
7
Change Unlock
Password
(P44, 123aAM,888888)
123aAM is the new password
888888 is default password
(7570101998,P44,1)
1 means change password successfully; 0 means
unsuccessfully
8
Add /Remove unlocking
authorized RFID ID
1.add 10 RFID tags numbers, use
below command :
(P41,1,1,10,0000112345,00002
12345,0000312345,0000412345,0
000512345,0000612345,00007123
45,0000812345,0000912345,0000
012345)
1 means add
10 total 10 RFID tags .
2.remove all authorized RFID tags
in device
(P41,1,3)
9
Restart Device
(P15)
(7570101998,P15)
Device will restart itself after 30 sec
10
Set the Time Zone
(only effect SMS
content)
(P10,1,480)
480:time zone. Unit is minute.
Eg. Beijing time is 8 hour different
from GMT 0, 8 hr means 480 min.
value range is -12*60 to 13*60,in
default is ‘0’
(P10,1,-180)
(7570101998,P10,480)
11
Restore Factory
setting of device
(P13)
Except for IP address, VIP
numbers, APN, APN account &
password, all parameters will be
factory defaults.
(7570101998,P13)

Mobicom Telematics –GL600 GPS Smart Lock User Guide
16 / 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
7.5 Description of product working Process
Normally, if there is no any external wake up source, the device will go to sleep ,and wake up
according to RTC wake up interval(default is 30 minutes).
When device detected ‘swipe the RFID tags’, ‘Back Cover Opened’, ‘vibration’, ‘lock rope disconnect
/connect’ ,’RTC time interval’,GL600 device will be waken up , and worked about 10 minutes, during
the 10 minutes, it will be uploading data according to Data uploading interval(default is 30 sec).
7.6 Lock and Unlock Device
7.6.1 Lock the device
1.When inserted the two Probes of lock rope inside GPS lock, the GL600 device will lock itself
automatically. Meanwhile User will hear the Motor running, Buzzer ring twice and GPS led blinking
once.
2.If didn’t lock successfully, Buzzer ring every 1 sec, GPS led keep blinking, Stopped until lock rope
inserted or 60 sec later
7.6.2 Unlock the device
7.6.2.1 Unlock the device by SMS command
Send below SMS command to the SIM card number inside GL600 device.
(P43,888888)
When unlock successfully, Buzzer ring 3 second continuously, GPS led blinking 3 sec, User can take
out the lock rope.
7.6.2.2 Unlock the device by authorization RFID tags
Customer will get 2 authorization RFID tags in the package. When Power on the device, Swipe one of
the authorization RFID tag, will unlock the device. When unlock successfully, Buzzer ring twice,GPS
led blinking once, User can take out the lock rope.
If swiped with a unauthorized RFID tag, Buzzer ring 3 second continuously, GPS led blinking 3 sec,
and User can’t take out the lock rope.
Note:
Don’t swipe the two or more RFID tags at the same time, Otherwise ,can’t unlock the lock rope.

Mobicom Telematics –GL600 GPS Smart Lock User Guide
17 / 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
8 Tracking the device in Mobicom GPS Platform
8.1 Principle of communication
In order to have more understanding of GL600, it is recommended to experience the related
functions of this product on our GPS platform.
8.2 Get the login ID
Please get the Login ID of GPS tracking system from Platform providers(Mobicom sales),and
Monitor the tracker’s current location and others.
8.3 Login Software Platform
Please get the Web App link / PC based software / Android/IOS App and Manuals from Mobicom
sales or other Platform Providers , and manage your vehicles and trackers in the software Platform.
Mobicom Web App link:

Mobicom Telematics –GL600 GPS Smart Lock User Guide
19 / 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
9 Device Installation
GL600 device is easy to install ,Installation personnel insert the lock rope and across the lock hole,
and its strong magnet will attach container body.

Mobicom Telematics –GL600 GPS Smart Lock User Guide
20 / 20
Copyright © 2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
10 Warranty Terms
➢The warranty period will be12 months from the delivery date, the warranty shall not apply to any
defect, failure or damage caused by improper use, disassembled and alteration without
authorization.
➢Our obligations are limited to repair of the defect or replacement the defective part or at its
discretion replacement of the product itself.
➢Repair or replacement under the terms of this warranty does not provide right to extension or
renewal of the warranty period.
➢The warranty is not applicable to cases other than defects in material, design and workmanship.
Contact Us
Shenzhen Mobicom Telematics Co.,Ltd
RM602,Xichuangcheng,No.144,Zhiwuyuan Road, Longgang District, Shenzhen,China
Telephone number: +86 755 8450 8126
Email address: support@mobicomtracking.com
Website: http://www.mobicomtracking.com
Table of contents