Mocka Axel Locka 4 Drawer User manual

A B C D
E F G
Phillips screwdriver required
Hardware Supplied
allen
key x1
screw
x20
screw
x2
screw
x16
screw
x8
handle
x4
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall
anchor with all furniture sold and we recommend these are used to prevent your product tipping.
The fixing device provided should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
wall mount
x1
Axel Locka 4 Drawer
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Slide the legs [1] into the bottom of the side panel [2] until they click into
place.
2
1
CLICK!
CLICK!
111
2
This hole
facing inwards
Axel Locka 4 Drawer
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Slide the legs [1] into the bottom of the side panel [2] until they click into
place.
2
1
CLICK!
CLICK!
111
2
This hole
facing inwards
34
Slide the bottom of the side panel [3] onto the legs [1] until they click
into place.
Insert each end of the shelf bracket [4] into the gaps on the sides of the
unit, as shown. Secure with 2x screws (A) and tighten with the allen
key (B).
4
3
2
x2
CLICK!
CLICK!
1
1
A
B
3
Axel Locka 4 Drawer
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Slide panel [5] down along panel [2] as shown. Slide back panel [6] between panels [3] and [5] as shown.
6
5
3
5
3
2
Axel Locka 4 Drawer
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Slide panel [5] down along panel [2] as shown. Slide back panel [6] between panels [3] and [5] as shown.
6
5
3
5
3
2
78
Attach the top panel [7] as shown. Insert 4x screws (C) into the underside of panel [7] as shown and tighten
with a screwdriver. Bend the metal tabs on each side with a screwdriver.
Fasten the back panels [5] and [6] to the base of the unit with 4x screws
(C) and tighten with a screwdriver.
7
3
x4
x4
x4
x2
3
7
7
C
C
65
Axel Locka 4 Drawer
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Carefully turn the unit over as shown. Attach each bracket [8] to the
underside of the legs [1] using 3x screws (C). Tighten with a
screwdriver.
Attach drawer side panels [10] and [11] to base panel [9] as shown.
7
x4
x6
8
8
8
8
8
CC
C
1
1
Drawers x4
10
9
11
Axel Locka 4 Drawer
Assembly Instructions
6
mocka.co.nz | mocka.com.au

910
Carefully turn the unit over as shown. Attach each bracket [8] to the
underside of the legs [1] using 3x screws (C). Tighten with a
screwdriver.
Attach drawer side panels [10] and [11] to base panel [9] as shown.
7
x4
x6
8
8
8
8
8
CC
C
1
1
Drawers x4
10
9
11
11
12
Flip the drawer over and attach back panel [12] as shown. Secure panel [12] as shown.
12
x2
x2
10
9
11
10
9
11
10
9
11
12
10
11
Axel Locka 4 Drawer
Assembly Instructions
7
mocka.co.nz | mocka.com.au

13 14
Attach 1x handle (F) to front drawer panel [13] and secure with 2x
screws (E). Now attach panel [13] to side panels [10] and [11] and
secure with 4x screws (D). Tighten all screws with a screwdriver.
Repeat Steps 10 to 13 to complete all four drawers. Slide the rails out
from inside the unit as shown.
7
3
x2
12
10
11
13
13
13
F
E
E
D
D
Axel Locka 4 Drawer
Assembly Instructions
8
mocka.co.nz | mocka.com.au

13 14
Attach 1x handle (F) to front drawer panel [13] and secure with 2x
screws (E). Now attach panel [13] to side panels [10] and [11] and
secure with 4x screws (D). Tighten all screws with a screwdriver.
Repeat Steps 10 to 13 to complete all four drawers. Slide the rails out
from inside the unit as shown.
7
3
x2
12
10
11
13
13
13
F
E
E
D
D
15 16
Insert the assembled drawer into the unit, ensuring it slides smoothly
and easily along the rails.
Lift the completed unit into place, do not drag. Mark its height on the wall
with a pencil. Attach one end of the wall mount strap (G) to the back of
the unit with a 1x screw (G). Screw the other end into the wall at the
marked height with a wall screw. You’re done, enjoy!
G
G
G
Axel Locka 4 Drawer
Assembly Instructions
9
mocka.co.nz | mocka.com.au