MODUNFUL M699S User manual

Hand Dryer
M699S
■Thank you for your recent purchase of Modunful product. Please read the enclosed information to ensure the safe use of your product.
You are advised to record the following information to ensure a quick customer service response.
Name of seller(shop or retailer):esahcrupfoetaD
Date : year month day
Tel :
© Wenzhou Mojia Trade Co.ÿLTD All rights reserved.
Specifications
Item Description
Hand Dryer
Directly connect to power supply
40db
Width 240, depth 230, height 240
Between 0 and 80 °C *Set a temperature that prevents condensation
Model name
Model number
Power Rating
Decibel
Heater
Safety device
Dimensions (mm)
Mass
Available set temperature range
M699S
AC110 120V50Hz/60Hz
ÿÿÿÿÿNickel chromium heater
Excess current fuse/Temperature fuse (Motor, heater, and power terminal block)
65W
Motor power
Sensing distance
Dry time
Arir speed
120-150mm
10-15s
12m/s
Safety Precautions
WARNING
REQUESTS
The following symbols are used to indicate important safety instructions for the
use of the product.
CAUTION
Symbol
Definition
This symbol indicates a prohibited use the product.
This symbol is used to indicate a requirement in the use of this product.
These precautions are important for safe usage.Be sure to follow them and use
the product correctly.
Always use the specified power supply.
Otherwise, a fire could result.
Do not damage the power line.
Continued use of a unit with a damaged line could cause fire,
electric shock, or product problems.
Never disassemble, repair or modify the product.
Doing so could cause fire or electric shock.
Do not stub out cigarettes on this product.
Doing so could result in burns on the surface or cause a fire.
Do not cover Air nozzles with a hand or insert any object into
Air nozzles.
Doing so could result an electric shock or burn injury.
Do not squirt water on the product when cleaning it.
Doing so could result an electric shock.
Stop using the product immediately in case of abnormality or
product problems.
Continued use of the product could cause fire, electric shock, or injury.
When cleaning, turn off the power switch.
Failure to do so could result in sudden activation of the unit or
electrical shock.
Do not hang anything on the product.
Doing so could drop the product and result in injury.
Use water-resistant material for nearby walls or floor as small water drops
may spread about if a user moves hands violently when drying hands.
2.4Kg
IMPORTANT INFORMATION
UK/REP
Name: Sea&Mew Accounting Ltd
Address:ElectricAvenueVision25,London,EnfieldEN37GD
Contact Person: Billy Han
E-mail: [email protected]
EU/REP
Name: Sea&Mew Consulting
Address:97Avenued'Alfortville94600Choisy-le-Roi
Contact Person: SiyuGao
Tel:[phone]
E-mail: [email protected]
Manufacturer
Company Name:ZHEJIANG MODUN SANITARY WARE CO.,LTD
Address:NO 366, BINHAI ROAD, 21, WENZHOU, ECONOMIC DEVELOPMENT ZONE, ZHEJIANG
PROVINCE, CHINA
Importer
Company Name: Wenzhou Mojia Trade Co.,Ltd.
Address: CN, 325000, Zhejiangsheng, Wenzhoushi, Wenzhoujingjikaifaqu, Binhaiershiyilu, 366hao

2 3
Safety Precautions
Installation
Wenzhou Mojia 10/2020
47.24 59.05
REQUESTS
WARNING
Do not squirt water on the product when cleaning it.
Doing so could result an electric shock.
When cleaning, turn off the power switch.
Failure to do so could result in sudden activation of the product or electrical shock.
Do not use acid or alkali chemicals, benzine, or thinners.
Doing so could cause cracks.
Do not use cleansers, nylon sponges or dry cloth.
Doing so could make scratches.
The misuse prevention timer stops operation automatically after approximately 60 seconds of
continuous operation.
In order to continue to use the product, remove hands then start again.
Misuse prevention timer
Troubleshooting
Please read this section to troubleshoot any problem before requesting repair services.
Trouble Solutions
If the problem still persists after performing suggested actions, turn off the power switch and set the breaker to "Off."
No dry air blown when hands put in.
Dryer not stopped when hands removed
No warm air blows
The air volume is weak
●Power Switch might be set to OFF.
→If so, set Power Switch to ON.
●Has the Circuit Breaker ON been tripped?
→If it is OFF, please reset it.
●Is the sensor dirty?
→If the sensor is not clean, wipe it with a soft damp cloth.
●Heater Power Switch might be set to OFF.
→If so, set Heater Power Switch to ON.
●Has Filter accumulated dust or debris?
→Clean Filter if there is an accumulation of dust or debris
●Is the sensor dirty?
→If the sensor is not clean, wipe it with a soft damp cloth.