modway EEI-2089 User manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 3
EEI-2089/2090 CASUAL CHAIR
Hardware:
Component:
A Bolt M6x12mm x4
B
C Allen Wrench M4 x1
1 Chair Body x1
Thank you for purchasing the MODWAY CASUAL CHAIR！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approx assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.
2
1
Bolt M6x25mm x4
2 Left Leg x1
3
5
4
3 Right Leg x1
4 Front Rail x1 5 Back Rail x1

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 3
EEI-2089/2090 CASUAL CHAIR
STEP 1:
Please put Right Leg (3) on a carpeted or padded area.
Insert one end of Back Rail (5) and Front Rail (4) into Right Leg (3) as shown.
Attach by using 2 pieces of Bolt (A).
Repeat the same step for Left Leg (2).
After checking the leveling of all connections, use Allen Wrench (C) to tighten all Bolts (A) clockwise until secure.
Ax4 Cx1 Hardware & Tool required
STEP 2:
Please put Chair Body (1) upside down on a carpeted or padded area.
Attach the assembled Legs (2&3) into the holes of the bottom of Chair Body (1) by using 4 pieces of Bolt (B) as shown.
Use Allen Wrench (C) to tighten all Bolts (B) clockwise until secure.
5
4
3
2
A
A
A
A
C
Bx4 Cx1 Hardware & Tool required
1
5
4
3
2
B
B
B
B C

Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 3
EEI-2089/2090 CASUAL CHAIR
STEP 3:
Assembly is completed. The chair is ready to enjoy now!
Carefully turn over the assembled chair.