modway Nexus EEI-6283 User manual

EEI-6283
V1.15.01.23
Questions? Contact us!
609.256.9000 • [email protected]
www.modway.com
ASSEMBLY INSTRUCTIONS

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
O
H
Only use hand tools to assemble this item. Do not use power tools.
Do not tighten bolts or screws completely until all hardware is lined up
and inserted into the holes.
Do not over-tighten screws and bolts to avoid stripping the hardware
or cracking the item.
Assemble your item on a flat, carpeted area, with plenty of space to work.
This will prevent damage and scratches to your floors or the item while
you’re assembling the product.
Keep all components and packaging out of reach of children or animals
to avoid risk of choking or suffocation.
Approx. 60 minutes
assembly time
2 people recommended
for assembly
Care instructions are
listed in the last step
of this manual
Read through all of
the instructions
before starting
Make sure you have all
parts and components
before discarding any
packing materials
215PAGE OF
1Top Panel x1
2Bottom Panel x1
3 Side Panel - L x1
4 Side Panel - R x1
5Center Panel - L x1
6 Center Panel - R x1
7 Back Panel x1
8 Shelf Panel x2
9Body Support x2
Furniture components:
10 Drawer Front x3
11 Drawer Back x3
12 Drawer Side - L x3
13 Drawer Side - R x3
14 Drawer Bottom x3
15 Drawer Support x3
16 Door Panel x2
17 Metal Leg x2
18 Metal Leg Support x2
Provided hardware:
Missing parts or hardware? Need assistance?
Contact us before returning your item. We're here to help!
609.256.9000 • [email protected]
A1 Cam Lock x24
A2 Minifix Screw x24
A3 Plastic Cap x12
A4 Plastic Cap x12
B Wood Dowel M8 x 30mm x22
CCSK Cap Wood Screw
M6 x 60mm x12
DAllen Key M4 x1
E C.B Screw M3.5 x 16mm x70
F C.B Screw M4 x 25mm x5
G C.B Screw M4 x 38mm x12
H Handle 209 Knob x5
Let’s get started!
What You Need:
Phillips Head Screwdriver
Hammer
I1 Stud x10
I2 Stud Screw x10
JJCBC Screw M6 x 35mm x10
K JCBC Screw M6 x 50mm x4
LMetal Shelf Support x8
MSoft Closing 5/8 Hinges x4
N1 12" Drawer Slide - L/R x6
N2 12" Drawer Slide - L/R x6
OMetal Leg x1
PAnti - Tipping Kit x1
8
9
16
17
H
Hx3

Step 2
Step 1
15
PAGE OF3
1
9
A2
x12
A1
x4 x2
3
4
A1
x4
x8
B
HARDWARE
Cam Lock x4
Minifix Screw x12
COMPONENTS
Top Panel x1
Body Support x2
A1
A2
1
9
HARDWARE
Cam Lock x4
Wood Dowel M8 x 30mm x8
COMPONENTS
Side Panel - L x1
Side Panel - R x1
A1
B
3
4

Step 3
Step 4
15
PAGE OF4
5
6
A1
x4
x8
B
4
6
x6 x6
N1(L)
EE
Third hole from the edge.Small hole at the center.
N1(R)
x12
E
First hole from the edge and
top second hole from the edge.
HARDWARE
Cam Lock x4
Wood Dowel M8 x 30mm x8
COMPONENTS
Center Panel - L x1
Center Panel - R x1
A1
B
5
6
HARDWARE
C.B Screw M3.5 x 16mm x24
12" Drawer Slide - L x3
12" Drawer Slide - R x3
COMPONENTS
Side Panel - R x1
Center Panel - R x1
TOOLS
Screwdriver x1
E
N1
N1
4
6
-

Step 5
Step 6
15
PAGE OF5
1
3
4
5
69
x12
A2
A1
x12
A3
9
1
3
4
7
HARDWARE
Plastic Cap x12
Allen Key M4 x1
COMPONENTS
Top Panel x1
Side Panel - L x1
Side Panel - R x1
Center Panel - L x1
Center Panel - R x1
Body Support x2
A3
D
3
4
5
6
9
1
COMPONENTS
Back Panel x17

Step 8
Step 7
15
PAGE OF6
2
3
4
5
6
9
x12
C
D
9
17
18 x4
KD
17
18
HARDWARE
CSK Cap Wood Screw M6 x 60mm x12
Allen Key M4 x1
COMPONENTS
Bottom Panel x1
C
2
D
HARDWARE
Allen Key M4 x1
JCBC Screw M6 x 50mm x4
COMPONENTS
Metal Leg x2
Metal Leg Support x2
D
17
K
18

Step 9
Step 10
15PAGE OF
7
2
3
17
18
x10
J
D
17
18
2
3
x4
E
O
Please note that
hardware O has
a Plastic adjuster
at the bottom to unscrew
and adjust the height of
hardware O if necessary.
O
HARDWARE
Allen Key M4 x1
JCBC Screw M6 x 35mm x10
COMPONENTS
Metal Leg x2
Metal Leg Support x2
D
17
J
18
HARDWARE
C.B Screw M3.5 x 16mm x4
Metal Leg x1
TOOLS
Screwdriver x1
E
-
O

Step 11
Step 12
15PAGE OF
8
2
3
x10
I1
I2
35
x8
L
6
HARDWARE
Stud x10
Stud Screw x10
TOOLS
Screwdriver x1
I2
I1
-
HARDWARE
Metal Shelf Support x8
L

Step 13
Step 14
15PAGE OF
9
35
6
8
8
16
H
x8
ME
Fx2
16
H
COMPONENTS
Shelf Panel x28
HARDWARE
C.B Screw M3.5 x 16mm x8
C.B Screw M4 x 25mm x2
Handle 209 Knob x2
Soft Closing 5/8 Hinges x4
COMPONENTS
Door Panel x2
TOOLS
Screwdriver x1
E
F
H
M
16
-

Step 15
Step 16
15PAGE OF
10
3
6
16
M
M
x8 E
M
x8 E
M
STEP 1
STEP 3
STEP 4
STEP 2
16
A1
B
A2
x6
x12
x12
10 x3
11
x3
15 x3
13
x3
12
x3
HARDWARE
C.B Screw M3.5 x 16mm x16
TOOLS
Screwdriver x1
Fix hardware M into panel (3) and (6) by using hardware E.
(Repeat 4 times for each hardware.)
Tighten or loosen the screw to adjust
position of panel (16).
(Do only when needed.)
E
-
HARDWARE
Cam Lock x12
Minifix Screw x12
Wood Dowel M8 x 30mm x6
COMPONENTS
Drawer Front x3
Drawer Back x3
Drawer Side - L x3
Drawer Side - R x3
Drawer Support x3
TOOLS
Screwdriver x1
A1
A2
10
11
12
13
B
-
15

Step 17
Step 18
15PAGE OF
11
x3
11
12
13
G
x12
11
12
13
14
x3
HARDWARE
C.B Screw M4 x 38mm x12
COMPONENTS
Drawer Back x3
Drawer Side - L x3
Drawer Side - R x3
TOOLS
Screwdriver x1
G
11
12
13
-
COMPONENTS
Drawer Bottom x3
14

Step 19
Step 20
15PAGE OF
12
10
11
12
13
14
15
x12
A2
A1
x12
A4
x3
10
11
12
13
14
15
N2 (R)
Hole at the center.Third hole from the edge. Third hole from the edge.
x6
E
x6
E
x6
E
N2 (L)
x3
HARDWARE
Plastic Cap x12
COMPONENTS
Drawer Front x3
Drawer Support x3
TOOLS
Screwdriver x1
A4
10
15
-
HARDWARE
C.B Screw M3.5 x 16mm x18
12" Drawer Slide - L x3
12" Drawer Slide - R x3
TOOLS
Screwdriver x1
E
N2
N2
-

Step 21
Step 22
Put all the drawer in place along the drawer slides.
15PAGE OF
13
10
11 12
13
14
H
F
x3
x3
1
4
10
16 10
10
16
HARDWARE
C.B Screw M4 x 25mm x3
Handle 209 Knob x3
TOOLS
Screwdriver x1
F
H
-

Depending on use, it may be necessary
to tighten the hardware from time to
time, so please save the tools that
have been provided.
Not contract grade.
Clean using a non-abrasive cloth and
a mild cleaner.
CONNECT WITH US!
Tag us @modway_furniture and #modway
for a chance to be featured.
CARING FOR YOUR ITEM
Great job!
Your new cabinet is ready.
15PAGE OF
14

Different wall materials require unique wall fasteners.
The wall plugs (P5 are designed for fixing to concrete walls only.
Please consult your local hardware store to ensure you are using the correct hardware for your wall type
TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE
P - Anti Tipping Kits x 1
1) V Bracket x 2 2) Cable Tie x 1 3) 5/8" Screw x 1 4) 1-1/2" Screw x 1 5) Nylon Wall Plug x 1
STEP 1 STEP 2 STEP 3 STEP 4
STEP 5
Grid Surface
CABINET
STEP 6
WALL
CABINET
WALL
Tighten
15PAGE OF15
P1
P3 P5
P4
P1 P2
P2 P1
P1
Installation Instruction:
1. Attach a bracket (P1 securely to the back top rail of the furniture using screw (P3
provided through the smaller hole.
2. Make a hole for wall plugs (P5 position on the wall above the bracket (P1 that secured to the back unit.
Attach the wall plug (P5 into the hole by hammer. Fix the other bracket (P1 to the wall plug (P5 through
the smaller hole using screw (P4.
3. Place the furniture unit into position so both mounting brackets are vertically in line.
4. Lace the end of cable tie (P2 through the larger hole in each mounting bracket, bring both ends together
and slide the flat end through the locking end and draw it through until all slack is removed.
5. Make sure the strap is securely laced and locked.