modway EEI-3683 Series User manual

A
Bolt M6x90mm
x 6
2. Legs Frame 2
3. Back Rail
x1
EEI-3683 CHAIR/ EEI-3684 LOVESEAT
Component:
Page 1 of 3
Thank you for purchasing the MODWAY CHAIR!
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
Customer Service 609-256-9000 www.modway.com
1. Legs Frame 1 x1
1
2
3
4
4. Seat
B
5
5. Rod
x1
x1
x2
6. Seat Cushion
7. Back Cushion
x1
x1
6
7
B
Nut M6
x 6
Allen Wrench M4
x 2
C
EEI-3683-LGR-STE
EEI-3684-LGR-STE
The assembly steps are the same as single chair

Attach Legs frame 1 (1) to the assembled Seat (4) , Back Rail (3) and Aluminum Rods (5) as shown. Then insert 3 pieces
of Bolts (A) through Legs Frame 1 (1) into Seat (4) and Back Rail (3). Tighten with 2 pieces of Allen Wrench (C).
x3
A
EEI-3683 CHAIR/ EEI-3684 LOVESEAT
Page 2 of 3
STEP 1:
Hardware & Tool required
Hardware & Tool required
Customer Service 609-256-9000 www.modway.com
STEP 2:
3
x2
C
B
x3
B
A
Attach Legs frame 2 (2) to the assembled Seat (4), Back Rail (3) and Aluminum Rods (5) as shown. Then insert 3 pieces of
Bolts (A) through Legs Frame 2 (1) into Seat (4) and Back Rail (3). Tighten with 2 pieces of Allen Wrench (C).
5
4
1
C
x3
A
x2
C
x3
B
B
A
C
C
C

EEI-3683 CHAIR/ EEI-3684 LOVESEAT
Page 3 of 3
STEP 3:
Assembly is complete. Your chair is ready to be used now!
Customer Service 609-256-9000 www.modway.com
6
7
Carefully position the assembled chair to the desired location.
Put the Seat Cushion (6) and Back Cushion (7) into the assembled chair as shown.
Note: EEI-3684 with 2 pieces of Back Cushions (7).