modway EEI-2549 User manual

LEISURE CHAIR
leisure chair
EEI-2549 LEISURE CHAIR
Back Legs ×2
×8
E
Chair Body ×1
Front Legs ×2
×8
Bolt M8×100mm
Spring Washer M8
Flat Washer M8
×8
Adjustable Glide ×2
(Remarks: 2 pcs for backup use only)
and then follow the simple step-by-step
f reach of children.

EEI-2549 LEISURE CHAIR
A×4 B×4 C×4
A×4 B×4 C×4
STEP1:
STEP2:
Please take the seat off the Chair Body (3) and take the legs and hardware from package on the bottom of
Chair seat cushion. There are numbers shown on legs and each corner of the bottom of Chair body (3).
Please match them correctly. Attention the label '' Insert bolt from this side'' on the legs and insert the legs at
correct side.
Insert 1 piece of Front Leg (1) with 2 pieces of Bolt (A), 2 pieces of Spring Washer (B), and 2 pieces of Flat
Washer (C) into the bottom of Chair Body (3) as shown. Repeat the same steps for other Front Leg (1).
Do not fully tighten Bolts (A) for either leg.
Insert 1 piece of Back Leg (2) with 2 pieces of Bolt (A), 2 pieces of Spring Washer (B), and
2 pieces of Flat Washer (C) into the bottom of Chair Body (3) as shown.
Repeat the same steps for other Back Leg (2).
Do not fully tighten Bolts (A) for either leg.
D×1
D×1
Legs Package
+
Hardware Package
(1)
(1)
insert
bolt from
this side
(1)
(2)
(1)
(2)
insert
bolt from
this side

E×2
EEI-2549 LEISURE CHAIR
STEP3:
STEP4:
Please adjust the Adjustable Glide (E) on the bottom of the Back Legs (2) and
balance the chair for uneven floor.
Fully tighten all Bolts (A) with Allen Wrench (D).
Recover the Velcro on the bottom of Chair Body (3). Carefully turn over the chair .
Assembly is completed. The chair is ready to use now!
E