modway EEI-3431-NAT User manual

EEI-3431-NAT SIDE TABLE
Customer Service 908-368-1025︱www.modway.com Page 1 of 3
Hardware:
Component:
Thank you for purchasing the MODWAY SIDE TABLE!
Washer x8
Nut x8
Spanner x1
A
B
C
1. Top Table
2. Legs x4
x1
1
2
2
2
2
Before you start, here are some helpful advice:
We suggest you spend a short time reading through this leaflet and then follow the simple
step by step instructions.
Owing to the size and weight of the side table, we recommend that it is assembled by two adults,
on a carpeted or padded area, in the room that it is intended for. Approximate assembly
time: 30 minutes.
Please do not use any tools other than those provided or recommended in these instructions.
Please do not throw away any of the packaging or instructions until you have checked all
the components and hardware and the furniture is fully assembled.
Assemble all components loosely until advised to tighten. Depending on use, it may be necessary
to tighten the components from time to time, so please save the tools that have been provided.
Please keep all pieces out of reach of small children.
1.
2.
3.
4.
5.
6.

EEI-3431-NAT-WHI SIDE TABLE
Customer Service 908-368-1025︱www.modway.com Page 2 of 3
STEP 1:
Please put Top Table (1) on a carpeted or padded area.
Insert the tenon on Legs (2) into the rabbet on Top Table (1).
Repeat the same steps for the Legs (2) on the other 3 legs.
Insert 2 pieces of Nut (B) and Washer (A) into the Bolt on Leg (2)
through the top pre-drilled holes on Top Table (1).
Use the Spanner (C) to tighten Nut (B) clockwise until secure.
Repeat the same steps for the Legs (2) on the other 3 legs.
STEP 2:
A
B
A
B
1
2
2
2
2
Hardware & Tool required
x8
x8
x1
A
B
C
1
2
2
2
2
11
22
33
44

EEI-3431-NAT-WHI SIDE TABLE
Customer Service 908-368-1025︱www.modway.com Page 3 of 3
STEP 3:
Carefully position the assembled Side Table to the desired location.
Assembly is complete. Your side table is ready to be used now!