modway EEI-4323 User manual

Customer Service 908-368-1025 www.modway.com
Thank you for purchasing the MODWAY CABINET !
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 60 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
Owing to the size and weight of the Cabinet, we recommend that
Q)
L)
x 4
G)
x 16
B) CamLock Big/Metal
Ø 15 mm
Ø 12 mm 350 mm
x 14
M)
x 6
H)
x 4
C) Dowel/Wood
Dowel/Wood Dowel/Wood
Ø 8 x 30 mm
Ø 8 x 50 mm Ø 6 x 30 mm
x 36
P)
x 4 x 2
V) W)U)
x 1 x 4
R)
x 8
S)
x 8
T)
x 12
K)
x 2
F)
x 16
A) Cambolt/Metal
Ø 6 x 35 mm x 18
N)
x 2
I)
x 2
D)
x 6
O)
x 4
J)
x 2
E)
Screw/Metal
x 1
Hardware :
M 7 x 50 mm L 4
Hex /Allen Key/Metal
M 3.5 x 15.5 mm M 6.4 x 25 mm
Screw/Metal Screw/Metal
Ø 8 x 19 mm
Pin Sliding Top/Plastic
Ø 8 x 16 mm
Pin Sliding Bottom/Plastic
9 x 14 x 10 mm
Wedge/Plastic
Ø 8 mm
Divider wire/Metal
Screw/Metal
Screw/Metal Screw/Metal Screw/Metal
M 6.4 x 53 mm
M 6 x 10.5 mm M 8 x 39 mm M 3.5 x 13 mm
CABINETEEI-4323
CamLock Small/Metal Rail/Metal
Ø 15 mm
Screw Cap/Plastic
Screwdriver (Not Include)
x 1
Page 1 of 13
25 x 25 x 2 mm
Floor Protector/Sponge/Felt
Bumper /Silicon

Customer Service 908-368-1025 www.modway.com
Components:
5
1 2 3
67
4
8
10
9
Top Board x1
Assembly Leg x2
Frame Door x1
Support Board 1 x2 Support Board 2 x2
Back Board 1 x1 11 Center Board 2 x1 12 Fixed Shelf x1
14
13 Back Board 2 x1
Front Drawer x2
15 Side Drawer Left x2 Side Drawer Right x2 16
18
17 Back Drawer x2 Bottom Drawer x2
Center Board 1 x1
Bottom Board x1 Side Board Left x1 Side Board Right x1
CABINET
Page 2 of 13
15
16
17
18
1
2
3
4
5
67
6
7
8
10
11
12
13
9
EEI-4323
14

Customer Service 908-368-1025 www.modway.com
STEP 1:
Hardware required.
Screwdriver not included
Px4 Sx8 Wx1
Hardware required.
Screwdriver not included
Ax4 Ox4 Wx1
STEP 2:
CABINET
Page 3 of 13
9
9
15
16
P18 S
17
EEI-4323

Customer Service 908-368-1025 www.modway.com
STEP 3:
CABINET
Hardware required.
Screwdriver not included
Qx2 Tx12 Wx1
STEP 4:
Hardware required.
Screwdriver not included
Ax4 Cx8 Wx1
Page 4 of 13
EEI-4323

Customer Service 908-368-1025 www.modway.com
STEP 6:
CABINET
Hardware required.
Screwdriver not included
Ax5 Cx6 Wx1
Page 5 of 13
EEI-4323
STEP 5:
Hardware required.
Screwdriver not included
Drawer runner/rail track assembly to side-board ( 3 &4 )
See details position of the track roller should be at front edge
3
Front
4
Front
Qx1 Rx4 Wx1
Front
Rear
Front

Customer Service 908-368-1025 www.modway.com
STEP 7:
STEP 8:
Hardware required.
Screwdriver not included
Cx2 Nx2 Qx1 Rx4 Wx1
CABINET
Hardware required.
Dx1 E
E
D
x1
Page 6 of 13
12 12
8
8
EEI-4323
8
8
8
8
N
Drawer runner/rail track assembly to center-board ( 8 )
Flip Center-board
Securing the Center Board ( 8 ) to Fixed Shelf ( 12 )
Front with Edging
Rear without Edging
Rear
Front

Customer Service 908-368-1025 www.modway.com
STEP 9:
STEP 10:
CABINET
Hardware required.
Screwdriver not included
Bx4 Wx1
Hardware required.
Screwdriver not included
Bx5
Laminated
Wx1
Page 7 of 13
12
8
3
4
34
8
13
1
12
EEI-4323
Roller of track
facing Front edge
Front
Rear
Front

Customer Service 908-368-1025 www.modway.com
STEP 11:
STEP 12:
Hardware required.
Screwdriver not included
Ax1 Bx1 Ux1 Wx1
CABINET
Hardware required.
Dx5 E
Page 8 of 13
Laminated
3
4
12
1
1
8
12 3
4
11
11
10
2
EEI-4323
Laminated

Customer Service 908-368-1025 www.modway.com
STEP 13:
STEP 14:
CABINET
Hardware required.
Screwdriver not included
Ax4 Cx20 Wx1
Hardware required.
Screwdriver not included
Bx4 Wx1
Page 9 of 13
5
6
5
5
6
6
EEI-4323

Customer Service 908-368-1025 www.modway.com
STEP 15:
STEP 16:
CABINET
Hardware required.
E Hx4 Vx4
Page 10 of 13
Hardware required.
E Lx4
V
L
E
EEI-4323

Customer Service 908-368-1025 www.modway.com
STEP 17:
STEP 18:
CABINET
Hardware required.
Mx6
Hardware required.
Ix2 Jx2 Kx2
Page 11 of 13
EEI-4323
14

Customer Service 908-368-1025 www.modway.com
STEP 19:
CABINET
Page 12 of 13
EEI-4323
14
STEP 20:
Drawer with warning labels on top
WARNING
Children have died from furniture tipover.
To reduce the risk of furniture tipover:
ALWAYS install tipover restraint provided.
NEVER put a TV on this product.
NEVER allow children to stand, climb or
hang on drawers, door or shelves.
NEVER open more than one drawer at a
time.
Place heaviest items in the lowest drawer.
This is a permanent label.
Do not remove!
ATTENTION
Les enfants sont morts de basculement
dans les meubles. Réduire les risques de
renversement de meubles:
TOUJOURS installer la retenue de
renversement fournie.
NE JAMAIS installer de téléviseur sur ce
produit.
Ne JAMAIS LAISSER les enfants se tenir
debout, grimper ou s'accrocher aux tiroirs,
aux portes ou aux étagères.
NE JAMAIS ouvrir plus d’un tiroir à la fois
Placez les articles les plus lourds dans le
tiroir le plus bas.
Ceci est une étiquette permanente.
Ne pas enlever!
Los niños han muertopor vuelco de
muebles. Para reducir el riesgo de
vuelco de muebles:
SIEMPRE instale la restricción del vuelco
provista.
NUNCA cologue un televisor en este
producto.
NUNCA permita que los niños se paren,
trepen o cuelguen en cajones, puertas o
estantes.
NUNCA abra más de un cajón a la vez.
Coloque los artículos más pesados en los
cajón más bajo.
¡No Quitar!
ADVERTENCIA

Hardware required.
Screwdriver not included
Fx16 Gx16 Wx1
Customer Service 908-368-1025 Page 13 of 13www.modway.com
STEP 21:
CABINET
Assembly is complete. The Cabinet is ready to enjoy now !
STEP 22:
EEI-4323