modway EEI-2786 User manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 3
EEI –2786 BOOKCASE
Thank you for purchasing the MODWAY BOOKCASE！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the bookcase, we recommend that it is assembled by two adults, on a carpeted
or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all fitting out of reach of children.
Hardware:
A Cam x10
B
Component:
1 Left Frame x1 2 Right Frame x1
Bolt M6x60mm x30
1
2
C
Phillips Head Screwdriver
( Not included)
3 Shelf x5 4 Back Panel x5
3
3
3
3
3
4
4
4
4
4
Cam Post x10
Allen Wrench M4 x1
D

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 3
EEI –2786 BOOKCASE
HOW TO USE CAM AND CAM POST HARDWARE
STEP 1:
1. 2.
3. 4.
Note cam arrow
direction
Note cam arrow
direction
Turn cam clockwise
1/2 turn
5.
Put 1 piece of Shelf (3) to 1 piece of Back Panel (4) together as shown..
Attach them by using 2 pieces of Cam Post (B) and 2 pieces of Cam (A) .
Fully tighten Cams (A) by using Phillips Head Screwdriver (not included).
Ax10 Bx10 Phillips Head Screwdriver
( not included) Hardware & Tools required
3
B
4
B
A
A
Repeat the same steps for the remaining assembled Shelves (3) and Back Panels (4).
B
A
ABA
A

Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 3
EEI –2786 BOOKCASE
STEP 2:
STEP 3:
Hardware & Tools required
Cx30 Dx1
Carefully turn up the assembled bookcase.
Put Left Frame (1) and Right Frame (2) to the assembled Shelves (1) and Back Panel (2) as shown.
Attach 1 piece of assembled Shelf (3) and Back Panel (4) to Left Frame (1) and Right Frame (2) by using 6
pieces of Bolt (C).
Repeat the same steps for the remaining assembled Shelves (3) and Back Panels (4).
Use Allen Wrench (D) to tighten Bolts (C) clockwise until secure.
1
4
C
C
C
C
Assembly is complete. Your bookcase is ready to be used now!
C
C
2
3
3
3
3
3
4 4
4 4
C
C C
C C
C
C
C
C
C C C
C
C
C
C
C
C C
C C
C
C
C
D