modway EEI - 4456 User manual

Page 1 of 5
Component:
Hardware:
EEI - 4456
Thank you for purchasing the MODWAY ROCKING CHAIR!
Before you start, here is some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2. Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of small children.
JCBB BOLT M8 x 50mm
WOOD SCREW M4 x 38mm
WOOD DOWEL M8 x 30mm
ALLEN KEY (BALL SHAPE) M5
6 PCS
6 PCS
4 PCS
8 PCS
1 PC
A
B
C
D
E
1
Customer Service 609-256-9000 www.modway.com
SPRING WASHER M8
2
3
3
4
1. Front Rail x 1
2. Back Rail x 1
Chair Leg (L/R) x 2
Chair x 1
3.
4.

Hardware & Tool required
Hardware & Tool required
STEP 1:
STEP 2:
Page 2 of 5
Dx8
Customer Service 609-256-9000 www.modway.com
FRONT
FRONT
SIDE VIEW D
BACK
INSIDE
OUTSIDE
SIDE VIEW
1.2 Fit WOOD DOWEL (D) into FRONT RAIL (1) & BACK RAIL (2).
D
BACKFRONT
BACK FRONT
L
R
FRONT
BACK
L
R
1 2
3
3
EEI - 4456

Hardware & Tool required
Hardware & Tool required
STEP 3:
STEP 4:
Page 3 of 5
Ax2 Bx2 Ex1
Customer Service 609-256-9000 www.modway.com
R
FRONT
BACK
R
Attach Front rail (1) and Back Rail (2) to Chair Leg R (3) by 2 pieces of Bolt (A), 2 pieces of Spring Washer (B) and 1 pieces of
Allen Key (E) as shown.
Attach Chair Leg L (3) to Front rail (1) and Back Rail (2) by 2 pieces of Bolt (A), 2 pieces of Spring Washer (B) and 1 pieces of
Allen Key (E) as shown.
3
B
A
E
R
L
FRONT
BACK
L
Ax2 Bx2 Ex1
STEP 4.1
STEP 4.2
B
A
E
3
STEP 3.1
STEP 3.2
EEI - 4456

Hardware & Tool required
STEP 5:
STEP 6:
Page 4 of 5
Customer Service 609-256-9000 www.modway.com
x 2
Attach Chair Leg Frame to Chair (4) by 2 pieces of Bolt (A), 2 pieces of Spring Washer (B) and 1 pieces of
Allen Key (E) as shown.
Ax2 Bx2 Ex1
A
B
E
x 4
Cx4
C
Screw it Chair Leg Frame by 4 pieces of Screw (C) as shown.
Hardware & Tool required
EEI - 4456

Assembly is completed. The chair is ready to use now!
Hardware & Tool required
Page 5 of 5
Customer Service 609-256-9000 www.modway.com
Carefullly turn over the chair.
EEI - 4456
STEP 7: