modway Lippa Coffee Table User manual

CONNECTING TOP PANEL TO BASE
Customer Service 908-368-102 ︱www.modway.com Page 1 of 2
Thank you for purchasing the Modway Table!
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2. Owing to the size and weight of the top and base, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 15 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of children.
Hardware:
Components:
Bolt M8x18mm x4
Flat Washer M8 x4
1. Top x1
(Including SKU# EEI 1115 WHI TOP, EEI 1116 WHI TOP, EEI 1122 WHI TOP, EEI 1123 WHI TOP,
EEI 1124 WHI TOP, EEI 1128 WHI TOP, EEI 1129 WHI TOP, EEI 1136 WAL TOP, EEI 1832 WHI TOP,
EEI 1833 WAL TOP, EEI 1834 WHI TOP, EEI 1117 WHI TOP, EEI 1118 WHI TOP, EEI 1119 WHI TOP,
EEI 1120 WHI TOP, EEI 1125 WHI TOP, EEI 1130 WHI TOP, EEI 1131 WHI TOP, EEI 1132 WHI TOP,
EEI 1133 WHI TOP, EEI 1134 WHI TOP, EEI 1135 WHI TOP, EEI 1137 WAL TOP, EEI 1139 WHI TOP,
EEI 1140 WHI TOP, EEI 1141 WAL TOP, EEI 1646 WHI TOP, EEI 1121 WHI TOP, EEI 1138 WAL TOP,
EEI 1656 WHI TOP, EEI 1657 WHI TOP, EEI 1659 WHI TOP, EEI 1661 WAL TOP)
A.
B.
Allen Wrench x1
C.
2. Base x1
(Including EEI 1112 BASE, EEI 3120 ROS BASE, EEI 3125 GLD BASE, EEI 3447 BLK BASE,
EEI 1113 BASE, EEI 3121 ROS BASE, EEI 3126 GLD BASE, EEI 3448 BLK BASE, EEI 1114 BASE,
EEI 3122 ROS BASE, EEI 3127 GLD BASE, EEI 3449 BLK BASE, EEI 1657 BASE, EEI 3123 ROS BASE,
EEI 3128 GLD BASE, EEI 3450 BLK BASE, EEI 1775 BASE, EEI 3124 ROS BASE, EEI 3129 GLD BASE,
EEI 3451 BLK BASE)
1
2

CONNECTING TOP PANEL TO BASE
Customer Service 908-368-102 ︱www.modway.com Page 2 of 2
STEP :
1. Take out the hardware package from the carton of Base (2).
2. Adjust each four holes of the bottom of Top (1) and Base (2) to be matched ,then insert 1 piece Bolt
(A) with 1 piece Washer (B) into one of the matched holes of the bottom of Top (1) and Base (2) but
don’t tighten fully at this step.Insert other 3pieces Bolt (A) with 3 piece WasherS (B) into matched
holes,pls also don’t tighten fully.
3. Make sure all four pieces Bolts (A) with Washers (B) insert into holes and tighten all Bolts(A) by
using Allen Wrench(C) fully.
Assembly is complete. Your Table is ready to enjoy now!