modway Caima MOD-6187 User manual

A
B
JCBB SCREW M8 x 16MM
M5 ALLEN KEY
C
D
E
JCBC SCREW M6 x 50MM
SPRING WASHER 1/4''
ADJUSTABLE GLIDE C167
Hardware for Headboard
Hardware for Bed Frame and Legs
Component :
1- HEADBOARD
2- HEADBOARD SUPPORT
3- SIDERAIL (L & R)
4- FOOTBOARD
Customer Service 908-368-1025 www.modway.com Page 1/4
x8
x1
x3
x11
x3
Thank you for purchasing the MODWAY BED !
Before you start,here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the bed, we recommed that it is assembled by two adults,on a carpeted or
padded area, in the room that it is intended for.Approx assembly time:30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled.Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5.Assemble all components loosely until advised to tighten.Depending on use, it may be necessary to tighten
the components from time to time,so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.
MOD-6187
5- SLAT
6- SLAT WITH HOLE
7- CENTER SLAT
8- CENTER SLAT SUPPORT
1
2
6
4
8
3
5
7
F
G
M4 ALLEN KEY (BALL SHAPE )LONG
PAN HEAD SCREW M4 x 25MM
x1
x28
HJCBC SCREW M6 x 40MM x8
IFLAT WASHER 1/4" x8
JPROTECTION PAD x6

Place
Place
I x 6
Hardware & Tool required
STEP 1 :
Place SIDERAIL (L & R)(3) and FOOTBOARD(4) on a carpeted or padded area as shown.Attach FOOTBOARD(4) into
SIDERAIL (L & R)(3)by inserting JCBB SCREW M8 x 16MM(A).Tighten with M5 ALLEN KEY(B).
STEP 2 :
Hardware & Tool required
Page 2/4
Customer Service 908-368-1025 www.modway.com
4x
4x
B
A
A
B
STEP 1.2
STEP 1.1
Place HEADBOARD (1), HEADBOARD SUPPORT(2) ,and FOOTBOARD(4) on a carpeted or padded area as shown. Then, place the
FELT PROTECTOR (I) to the Bottom of HEADBOARD (1), HEADBOARD SUPPORT(2) ,and FOOTBOARD(4)or padded area as shown.
2x
I
2x
I
2x
I
1
2
4
A x 8 B x 1
MOD-6187

Place
Place
Hardware & Tool required
STEP 3 :
STEP 4 :
Page 3/4
Customer Service 908-368-1025
Flip the assembled CENTER SLAT(7) over. Place the SLAT WITH HOLE(6) on the CENTER SLAT (7) and place the
CENTER SLAT SUPPORT(8) attach them by inserting JCBC SCREW M6 x 50MM(C),and Spring Washer1
4''.
Tighten with M4 Allen Key(Ball Shape)Long(D).Then, attach ADJUSTABLE GLIDE C167(E) into CENTER SLAT SUPPORT(8).
www.modway.com
Hardware & Tool required
A
6
8
7
F
B
3x
3x
4
F
A x 3 B x 3 B x 3
G
5
28x
Screw the slat(5) by inserting PAN HEAD SCREW M4 x 25MM (G) or padded area as shown. Tighten with SCREW DRIVER.
G x 28
F
MOD-6187
2x
J
J x 4
2x
J

Remark: Do not sit or lie down on the
platform without the mattress
Place
Place
STEP 5 :
Page 4/4
Customer Service 908-368-1025
Assembly is complete,the bed is ready to be enjoyed now!
www.modway.com
8x
F
D
I
H
B
Place the Headboard(1) with Headboard support(2) attach them by inserting JCBC SCREW M6 x 40MM(H),SPRING WASHER 1/4''(D),
and FLAT WASHER 1/4"(I).Tighten with M4 ALLEN KEY (BALL SHAPE )LONG(F).
Hardware & Tool required
H x 8 D x 8 I x 8 F
MOD-6187
2x
J x 2
J