modway EEI-799 User manual

Customer Service 908-368-1025︱
︱︱
︱www.modwayfurniture.com Page 2 of 2
E EI -799 WHITE METAL TWIN BED
Ax4 Bx4 Dx1 Cx1
STEP 1:
Place the 2pcs Side Rail with Slat (3) into 1pc Support Leg (4) as shown.
Insert 2pcs Bolt (A) into the pre-drilled Holes on the Support Leg (4) through the pre-drilled holes on the Side Rail.
Secure them by using 2pcs Nut (B) from the bottom of the Support Leg (4).
Tighten the Bolt (A) and Nuts (B) with Open Wrench (C) and Allen Wrench (D) as shown.
Repeat the same steps for the remaining Support Leg (4).
Hardware & Tool required
STEP 2:
3
3
4
4
3
3
4
3
3
4
A
A
B
B
C
D
Assembly is completed. The bed is ready to enjoy now!
Place the Headboard (1) close to the assembled Side Rail with Slat (3) and Support Legs (4).
Insert the hooks on the Side Rail with Slats (3) into the hook holder on the Headboard (1) as shown.
Repeat the same steps for the Footboard (2).
3
2
3
4
4
1
1
3 Hooks on side rails
Hook Holder on
Headboard/Footboard

Customer Service 908-368-1025︱
︱︱
︱www.modwayfurniture.com Page 2 of 2
E EI -799 WHITE METAL TWIN BED
Ax4 Bx4 Dx1 Cx1
STEP 1:
Place the 2pcs Side Rail with Slat (3) into 1pc Support Leg (4) as shown.
Insert 2pcs Bolt (A) into the pre-drilled Holes on the Support Leg (4) through the pre-drilled holes on the Side Rail.
Secure them by using 2pcs Nut (B) from the bottom of the Support Leg (4).
the Bolt (A) and Nuts (B) with Open Wrench (C) and Allen Wrench (D) as shown.
Repeat the same steps for the remaining Support Leg (4).
Hardware & Tool required
STEP 2:
3
3
4
4
3
3
4
3
3
4
A
A
B
B
C
D
Assembly is completed. The bed is ready to enjoy now!
Place the Headboard (1) close to the assembled Side Rail with Slat (3) and Support Legs (4).
Insert the hooks on the Side Rail with Slats (3) into the hook holder on the Headboard (1) as shown.
Repeat the same steps for the Footboard (2).
3
2
3
4
4
1
1
3
Hooks on side rails
Hook Holder on
Headboard/Footboard
STEP 3:
Tighten all Bolts with Allen Wrench (C),after all assemlded
Fixation