modway Palace EEI-2302 User manual

EEI-2302 ROUND BED
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 1 of 5
Thank you for purchasing the
MODWAY ROUND BED.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 35 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6. Please keep all fitting out of reach of children.
Hardware:
A. Bolt M8x80mm x 6
B. Flat WasherM8*16mm x 12
C. Nut x 6
D. Cover x 6
E. Wrench x 1
F. Allen Wrench M6x 1
G. Allen Wrench M8x 1
H. Support Foot x 8
I. Rope 4000mm x 1
Component:
1 Bed Body x1 2 Bed Top x 1 3 Bed Foot x 1 4 Bed Cushion x 1
5 Ottoman Cushion x1 6 Pillow x 5
Option 1
Option 2
Option 3
with rope
Separate
the foot
1
2
4
3
5
6

EEI-2302 ROUND BED
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 2 of 5
STEP 1:
Take out the parts from the box carton as shown.
Please put all parts on a carpeted or padded surface.
STEP 2:
Attach Bed Top (2) to the top of Bed Body (1), please make sure the holes are aligned.
1
3
2
4
5
5
1
2
3 4
6
6
6
6
1
2
3

EEI-2302 ROUND BED
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 3 of 5
STEP 3:
Note
：
Bolt (A) will be connects the Bed Top (2) to the Bed Body (1). 6 pieces Nut (C) needs to be locked from
inside the basket.
Insert 6 pieces Bolt (A) with 6 pieces Flat Washers (B) into the top holes on the Bed Top (2) as picture,
Then insert 6 pieces Flat Washers (B) and 6 pieces Nut (C) onto the Bolts (A) & tighten Bolts (A) by using Allen
Wrench (G) and Wrench (E) as shown.
Hardware & Tools required
STEP 4:
Just put the assembled round bed on the flat surface.
Put Bed Cushion (4) and 5 pieces Pillow (6) to the assembly unit as shown. And cover the head of Nut (C) with
6 pieces Cover (D). Just put the assembled round bed on the flat surface.
The option 1 assembly is complete. Your round bed is ready to be used now!
Hardware & Tools required
1
2
3
G
B
A
B
C
E
2
1
B
x 12
A
x 6
x 1
E
C
x 6
x 1
G
4
C
D
1
2
3
x 6
D

EEI-2302 ROUND BED
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 4 of 5
STEP 5:
And also you can hang the assembled round bed into anywhere you want to hang.
Please follow the arrow to pass the rope (I) across the top of Bed Top (2) and as shown
Remind: make sure the cord is securely attached if the round bed is hoisted, the round bed maximum load is
250kg. The option 2 assembly is complete.
Hardware & Tools required
STEP 6:
And also you can be taken out of the bottom foot and used as ottoman, please follow below step.
Then take out bolts from the bottom of Bed Foot (3) by using Allen Wrench (F) as shown. Please do not throw
away the unloaded bolts.
Hardware & Tools required
2
I
I
2
rope
I
I
rope
x 1
I
Don't throw away
1
2
3
F
x 1
F

EEI-2302 ROUND BED
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 5 of 5
STEP 7:
Insert 8 pieces Support Foot (H) into the bottom holes of Bed Body (1) , Tighten Support Foot (H) by hand.
Hardware & Tools required
STEP 8:
Put Bed Cushion (4) and Ottoman Cushion (4) and 5 pieces Pillow (6) to the assembly unit & Bed Foot (3) as
shown. The option 3 assembly is complete, now your round bed is ready to be used now!
1
2
H
H
x 8
H
1
2
4
3
5
6
1
2
3
4
5