modway EEI-4449 User manual

EEI-4449 SOFA
Customer Service 609-256-9000︱www.modway.com
Page 1of 5
Thank you for purchasing the MODWAY SOFA
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the sofa, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
Components:
1. Sofa Seat x1 2. Left Armrest x1 3. Right Armrest x1
4. Leg x4 5. Support Leg x1 6. Sofa Back x1 7. Seat Cover
8. Seat Cushion x2 9. Back Pillow x5 10. Side Pillow x2

EEI-4449 SOFA
Customer Service 609-256-9000︱www.modway.com
Page 2of 5
STEP 1:
1. Please put Sofa Seat (1) upside down on a carpeted or padded surface.
2. Open the Zipper strip at the bottom of the Sofa Seat (1) as shown and take out the 4 pieces Legs (4), 1 piece
of Support Leg (5), 5 pieces of Back Pillows (9), 2 pieces of Side Pillows (10) and Hardware bag.
STEP 2:
1. Please carefully turn over Sofa Seat (1).
2. Insert Left Armrest (2) and Right Armrest (3) to Sofa Seat (1) by using the pre-installed Clips on
Sofa Seat (1),Left Armrest (2) and Right Armrest (3) to lock each other as shown.

EEI-4449 SOFA
Customer Service 609-256-9000︱www.modway.com
Page 3of 5
STEP 3:
1. Put the assembled Sofa Seat (1),Left Armrest (2), and Right Armrest (3) on a carpeted or
padded surface.
2. Tighten 4 pieces of Legs (4) to Left Armrest (2) and Right Armrest (3) clockwise as shown by hand.
3. Tighten 1 piece of Support Leg (5) to the center of Sofa Seat (1) clockwise as shown by hand.
STEP 4:
1. Please carefully turn over the assembled Sofa Seat (1),Left Armrest (2) and Right Armrest (3).
2. Insert Sofa Back (5) to Left Armrest (2) and Right Armrest (3) by using the pre-installed Clips on
Left Armrest (2),Right Armrest (3) and Sofa Back (5) to lock each other as shown.

EEI-4449 SOFA
Customer Service 609-256-9000︱www.modway.com
Page 4of 5
STEP 5
1. Put Seat Cover (7) cover over the assembled Sofa Seat (1),Left Armrest (2),Right Armrest (3) and
Sofa Back (6) as shown.
2. Pull Seat Cover (7) in line with the assembled Sofa Seat (1),Left Armrest (2),Right Armrest (3) and
Sofa Back (6) by hand as shown, then fix the Seat Cover (7) by vercro as shown.
Special:The Fabric Cover (1) is made by fabric, there will be some wrinkles after folding and packing in the
carton,It can be ironed to be better. There will be no much wrinkle on the surface of Fabric Cover (1) after
ironing. (Noted: Even no ironing, these wrinkles on the fabric cover will be much better automatically
after aperiod of time due to gravity of usage.)

EEI-4449 SOFA
Customer Service 609-256-9000︱www.modway.com
Page 5of 5
STEP 6
1. Open the compressed bag with scissors and take out 2 pieces of Seat Cushion (8) as shown with Figure 1.
2. Carefully put 2 pieces of Seat Cushions (8) to the assembled sofa.
STEP 7
Carefully put 5 pieces of Back Pillows (9) and 2 pieces of Side Pillows (10) to the assembled sofa as shown.
Assembly is complete. Your sofa is ready to enjoy now